0001261001 Scania Starter Motor 24V 7.5kW 12T

0001261001 Heavy-Duty Truck Starter Motor for SCANIA DC13

For inventory buyers opening a first wholesale order, this aftermarket heavy-duty truck starter motor is specified for SCANIA DC13 with 24V, 7.5kW and 12T. The page keeps the replacement identity, technical definition and B2B purchase information in one place.

For fleet-parts buyers confirming an incoming batch, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

0001261001 Starter Motor Specifications and Technical Drawing

For fleet-parts buyers preparing an OE-based quote, this reference group can cover nearby starter versions. Keep 0001261001, 24V, 7.5kW and 12T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For technical sales teams separating similar housings, the source-faithful technical drawing records the available mounting information for 0001261001, including 3×Ø14, Ø92, 1.8 mm, 48±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

0001261001 Aftermarket Replacement and Application

For equipment-parts dealers checking version-defining data, 0001261001, 1796026-6146, 1447911 forms the usable OE and cross-reference group for this product, while SCANIA DC13 is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For purchasing teams confirming electrical ratings, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

0001261001 Wholesale Supply for Distributors and Importers

For distributors setting packaging requirements, buyers can discuss 20 pcs MOQ, production planning around 7–15 days after confirmation, neutral cartons or private-label packaging, and an 18-month warranty under the agreed sales terms.

For aftermarket product managers updating a customer item master, the order can specify testing scope, sampling level, label content and packing details. Reference-label, drive-end and terminal-protection photos may also be requested before shipment for the agreed product version.

0001261001 Starter Motor Buyer FAQ

How can an importer validate flange clocking when preparing a fitment request?

For service-parts networks confirming electrical ratings, no separate angular callout is stated for 0001261001. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

Which comparison prevents a mismatch for module 3 before accepting a substitute?

For importers checking repeat-order specifications, module 3 is part of the gear geometry for 0001261001. Confirm it together with the 12-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

How should a distributor confirm 0001261001 inside a mixed starter shipment before accepting a substitute?

For inventory buyers updating a customer item master, give each carton line its own reference, 24V, 7.5kW and 12T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

What evidence best identifies 0001261001 order testing before stock is assigned?

For fleet-parts buyers reviewing customer demand, Elecdura can discuss armature, solenoid, no-load and load testing for 0001261001. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 7.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

What evidence best identifies 0001261001 rear-terminal photograph when checking a replacement proposal?

For equipment-parts dealers preparing an OE-based quote, use the rear view of 0001261001 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in SCANIA DC13. A correct drive end with an unusable terminal position is not a complete fitment match.

What evidence best identifies SCANIA DC13 cranking condition before stock is assigned?

For purchasing teams separating similar housings, before replacing the starter on SCANIA DC13, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 7.5kW starter and make a product query easier to resolve.

What should receiving teams compare on 0001261001 three-view gallery when confirming the offer line?

For distributors evaluating a direct replacement, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to 0001261001; they should be reviewed together with the 12T drive and SCANIA DC13 application. Request an additional close-up when the customer's unit hides a deciding feature.

What evidence best identifies 0001261001 stock identification for warehouse identification?

For aftermarket product managers preparing distributor pricing, label the storage location with 0001261001, 24V, 7.5kW and 12T, and keep a verified drive-end and rear-view image with the item master. Do not combine easily confused Scania units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

Request a Wholesale Quote for 0001261001 Heavy-Duty Truck Starter Motor

For engine-parts specialists reviewing customer demand, send 0001261001, 1796026-6146, 1447911, the SCANIA DC13 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 7.5kW, 12T version and prepare a product-specific wholesale quotation.