19795N Scania 12T Starter Motor Wholesale

19795N Starter Motor Aftermarket Supply for Scania commercial-vehicle

19795N defines stock for Scania commercial-vehicle as 24V, 7.0kW, 12T and CW. Confirm 24V 7.0kW 12T module-3.5 catalog configuration before releasing a first order or replacing an approved sample.

A useful enquiry pairs 19795N with the equipment record, old-starter label and clear front, side and terminal images. Add the order quantity, destination and required date so technical selection, sample planning, carton marking and freight options can be addressed in one response.

19795N Starter Motor Mounting Dimensions for Distributor Approval

19795N Scania commercial-vehicle 24V 7.0kW 12T starter mounting dimensions.

Check the 19795N drawing against the removed starter at the mounting face and drive end. The critical references are mounting-hole layout from the drawing, locating-pilot profile from the drawing, mounting-face pattern from the drawing and drive-end projection from the drawing. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

After the 19795N mounting check, verify 24V, 7.0kW, 12T and CW with module 3. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

19795N Starter Motor OE Cross-References for Distributor Enquiries

• Use the full number: Start with 19795N, 19802N, 0001241001, 0001261001, 0001261002, 0001261025, retaining prefixes, suffixes and separators in the RFQ.

• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

19795N Starter Motor Aftermarket Supply for Regional Distributors

Wholesale planning for 19795N can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

A first-lot sample is useful when the fleet carries related starters with similar housings. Retain the approved 19795N label, front view and terminal view, then use recent demand and branch transfer time to set reserve stock and delivery priorities.

Elecdura’s video shows starter-motor production and electrical testing used to support wholesale orders. It provides supplier-capability context for 19795N; the product decision itself still depends on the complete reference, 24V 7.0kW rating, drive end, mounting face and terminal layout.

19795N Starter Motor Questions from Commercial Buyers

Before removing 19795N, what should the workshop test under load during a Scania 12T regional electrical check?

Before fitting 19795N, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

Which checks should follow an OE-number match for 19795N in a Scania 12T regional sourcing program?

A number match narrows the search but does not finish it. For 19795N, compare the stated application, electrical output, 12T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

What should a distributor match before ordering 19795N for Scania commercial-vehicle during regional sourcing?

Use the full old-unit number and Scania commercial-vehicle record. Compare the 12T pinion, mounting-hole layout from the drawing, locating-pilot profile from the drawing and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

Which mounting-face points distinguish the specified 19795N version during a Scania 12T regional inspection?

Align the removed starter and 19795N at the mounting face. Compare locating-pilot profile from the drawing, mounting-face pattern from the drawing, mounting-hole layout from the drawing and drive-end projection from the drawing. Use the drawing for dimensions, measure with suitable tools and check terminals separately.

How can 19795N stock be separated by application risk in a Scania 12T regional program?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent 19795N usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

Which first-lot checks protect a distributor receiving 19795N during a Scania 12T regional receiving check?

For 19795N, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match mounting-hole layout from the drawing, locating-pilot profile from the drawing and the specified 12T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

Which commercial details belong in an export enquiry for 19795N in a Scania 12T regional sourcing program?

Send the complete OE number, exact Scania commercial-vehicle details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 24V 7.0kW 12T CW starter with packing, lead time, warranty and freight options.

Which photographs and readings help Elecdura review 19795N after installation in a Scania 12T regional review?

Keep the carton or product traceability code and note when and where 19795N was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete records allow technical support to respond without repeated requests for basic information.

19795N Send a Starter Motor Distributor Enquiry

For a focused 19795N quotation, share the machine or engine record, old-starter number, mounting and terminal images, order volume, delivery country and timing. You can email the RFQ directly to info@elecdurauto.com; Elecdura will reply with the matching specification, availability, packing and commercial terms.