10K17A 24V A1 135 mm left-15-degree O-ring Heavy-Duty A/C Compressor for XCMG 80 excavator

Fleet Replacement 10K17A A/C Compressor for XCMG 80 excavator

A stopped XCMG 80 excavator machine is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete aftermarket 10K17A A/C compressor is supplied for compact excavator fleet support where ear count prevents wrong dispatch. The page keeps narrow eight-ear single-A 135 mm 24V left-15-degree O-ring build together with the 24V, A1 and 135 mm drive on the purchase record, giving the fleet maintenance buyer one coherent product identity.

The assembly can be evaluated as a sample and then retained as a repeat wholesale line; approval should connect the XCMG 80 excavator application, 24V, A1 and 135 mm and fitment photographs so later orders do not depend on housing shape alone.

Importer Specification Sheet for This 10K17A A/C Compressor

The specification block is deliberately limited to facts attached to this complete compressor; it supports seasonal service demand without guessing at system values the product source does not state. The workshop should obtain those missing service quantities from the approved information for XCMG 80 excavator.

Importer Photo Review for This 10K17A A/C Compressor

If several 10K17A versions are present in the same fleet, mark the old compressor before it reaches the bench. Photograph its installed position on XCMG 80 excavator and keep the resulting angle shots with the specific purchase record.

Verify all eight ears, left 15-degree O-ring head and 24V connector. The same review needs to agree with 24V, A1 and 135 mm. A conflict at either point calls for clarification before the fleet maintenance buyer approves a substitute.

Fleet Parts Boundaries for This 10K17A A/C Compressor

The 12V narrow-foot XCMG 80 product has a different electrical and mounting boundary; treat the alternative as a separate physical product, even if both units are commonly described by the same 10K17A family.

If a distributor stocks both versions, use different item codes and bin references; the separation makes the XCMG 80 excavator configuration visible during quotation, receiving, picking and warranty review.

Distributor Receiving and Service Notes for This A/C Compressor

A practical goods-in check starts with the purchase record and ends with the physical assembly. Match XCMG 80 excavator and 24V, A1 and 135 mm, inspect the mounting points, and photograph any discrepancy before stock is released.

Installation planning for XCMG 80 excavator still includes the rest of the A/C circuit; debris, leakage, belt problems and poor heat rejection should be addressed before the workshop commissions this complete compressor assembly.

Wholesale Ordering Support for the XCMG 80 excavator A/C Compressor

This 10K17A configuration can enter a sample order, a fleet replacement program or regular distributor replenishment; commercial terms are discussed against the approved XCMG 80 excavator build, including quantity, packing and buyer-brand requirements.

When requesting a sample, identify the target XCMG 80 excavator machine or truck and the expected annual demand; the same enquiry can state whether the buyer needs neutral packing, branded labels or consolidation with other compressor models.

Importer FAQ for This 10K17A A/C Compressor

These buyer questions connect the 10K17A product identity with quotation, receiving and workshop use for XCMG 80 excavator.

How should a buyer confirm the 24V clutch?

Confirm that XCMG 80 excavator supplies the stated clutch voltage and that the connector agrees with the product image. Record the result with the complete 24V, A1 and 135 mm description.

What receiving checks apply to this A1 10K17A compressor?

Match the delivered 10K17A compressor with the approved image and purchase record; check the clutch and exposed mounting points for transit contact before binning.

Which photos help confirm this XCMG 80 excavator compressor?

For the 24V, A1 and 135 mm 10K17A build used on XCMG 80 excavator, the most useful set combines an in-vehicle or in-machine view with clear bench photographs of every connection side; include the label, but do not rely on it as the only evidence.

What identifies this XCMG 80 excavator A/C compressor?

Use XCMG 80 excavator, 10K17A and 24V, A1 and 135 mm together; add the approved image and the mounting or port detail used to accept this physical build.

Can this XCMG 80 excavator compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified XCMG 80 excavator bulk programs. The physical product is approved before artwork or marking details.

What should a wholesale RFQ include for this 10K17A compressor?

Provide XCMG 80 excavator, 24V, A1 and 135 mm, quantity, destination and packing requirements; include old-unit views that show the clutch, head, connector and mounts.

Is the 10K17A family number enough to confirm fitment?

Treat 10K17A as a family reference. The accepted XCMG 80 excavator unit is the one whose drive and visible connection points agree with the old compressor.

What wrong-stock risk applies to this A1 10K17A compressor?

The 12V narrow-foot XCMG 80 product has a different electrical and mounting boundary. Recording that boundary helps the fleet maintenance buyer avoid stock mix-ups during repeat supply.

Request a Wholesale 10K17A A/C Compressor Quote

Send the product and program details in one RFQ: XCMG 80 excavator, 10K17A, 24V, A1 and 135 mm, quantity, destination and packing; Elecdura will use the visible fitment evidence to review the requested complete assembly. Once the physical match is accepted, the same purchase record can support purchasing, receiving and future distributor replenishment.