5H14 24V A2 170 mm Heavy-Duty A/C Compressor for XCMG 360 excavator

Importer Guide to This 5H14 A/C Compressor

Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this XCMG 360 excavator compressor important at quotation stage. For construction-equipment sourcing where the unusually large pulley is the primary identifier, Elecdura supplies this complete 5H14 compressor with twin-A 170 mm 24V SD5H14 configuration. The stated 24V, A2 and 170 mm configuration remains the reference for quotation, packing and repeat stock.

The commercial value is clarity at handover: purchasing sees XCMG 360 excavator, the warehouse sees 24V, A2 and 170 mm, and the workshop sees the visible mounting layout. Those details allow the fleet maintenance buyer to assess the whole assembly before it enters stock.

Distributor Specification Check for the 5H14 A/C Compressor

Use these specifications as the purchase baseline and reconcile them against the removed compressor. A shared 5H14 family name cannot confirm the pulley, connector, head or feet. Refrigerant and lubrication figures outside the listed product data should come from the service information for XCMG 360 excavator.

Wholesale Mounting Review for This 5H14 A/C Compressor

Start the comparison with an installed overview on XCMG 360 excavator, because it records belt and hose orientation. Continue with individual clutch, port, connector and mounting views. This sequence gives purchasing and the supplier a common fitment reference during the XCMG 360 excavator 24V, A2 and 170 mm review.

The decisive step is to measure the large 170 mm clutch and confirm the twin-A drive and XCMG mount. Keep the A2 drive and 24V clutch consistent with this entry even when another 5H14 unit has a familiar casting.

Wholesale Variant Control for the XCMG 360 excavator A/C Compressor

The XCMG 370 neighboring product uses a 132 mm clutch despite sharing the 5H14 family. That is the practical boundary between this XCMG 360 excavator product and the nearest look-alike; this order is for the 24V, A2 and 170 mm version. Purchasing can preserve it by retaining the configuration on the XCMG 360 excavator order line, with 24V, A2 and 170 mm retained on the stock record.

Repeat XCMG 360 excavator orders should carry the same product image and configuration used for the original approval. That record is more dependable than choosing from a shelf of compressors by housing shape alone for XCMG 360 excavator with 24V, A2 and 170 mm.

Wholesale A/C Compressor Handling for XCMG 360 excavator

The warehouse can inspect this XCMG 360 excavator assembly without opening the sealed ports. Confirm 24V, A2 and 170 mm, then compare the visible head and feet with the reference image. A damaged or conflicting compressor remains outside available stock until reviewed for XCMG 360 excavator with 24V, A2 and 170 mm.

A replacement 5H14 compressor cannot correct an unresolved A/C circuit fault for XCMG 360 excavator with 24V, A2 and 170 mm. The technician should review belt alignment, airflow, leakage and system cleanliness, then use the oil and refrigerant procedure confirmed for XCMG 360 excavator.

Bulk XCMG 360 excavator A/C Compressor Supply for Distributors

Fleet and aftermarket buyers can discuss volume pricing for this XCMG 360 excavator compressor after the old-unit comparison is complete. That sequence lets commercial customization proceed without weakening the product identity for XCMG 360 excavator with 24V, A2 and 170 mm.

For container planning, state how many units of this exact 5H14 configuration are required and whether cartons need buyer marks. The fleet maintenance buyer should keep any neighboring variant on a separate line.

Distributor FAQ for the XCMG 360 excavator A/C Compressor

For this 5H14 build, buyers usually need clear answers on physical identity, variant control, packing and service preparation in the XCMG 360 excavator 24V, A2 and 170 mm order.

Which details belong on the XCMG 360 excavator compressor order?

Use XCMG 360 excavator, 5H14 and 24V, A2 and 170 mm together. Add the reference image and the mounting or port detail used to accept this physical build for XCMG 360 excavator.

How should a buyer confirm the 24V clutch?

Confirm that XCMG 360 excavator supplies the stated clutch voltage and that the connector agrees with the product image. Record the result with the complete 24V, A2 and 170 mm description.

Why does port direction matter on this 5H14 compressor?

A different head can change outlet angle, fitting style or service access during the XCMG 360 excavator 24V, A2 and 170 mm review. Compare the offered XCMG 360 excavator 5H14 port block directly with the removed compressor before shipment, with 24V, A2 and 170 mm retained on the stock record.

Can this XCMG 360 excavator compressor use private-label packing?

Yes, subject to volume and program review. Elecdura first confirms the 5H14 configuration, then quotes the requested carton, label and identification treatment for XCMG 360 excavator with 24V, A2 and 170 mm.

What wrong-stock risk applies to this A2 5H14 compressor?

The XCMG 370 neighboring product uses a 132 mm clutch despite sharing the 5H14 family. Keep the two builds on separate quotation and warehouse lines for XCMG 360 excavator.

What should a wholesale RFQ include for this 5H14 compressor?

State the 5H14 application, required volume, shipping country and delivery target for XCMG 360 excavator with 24V, A2 and 170 mm. Attach the fitment photographs and note any neutral or buyer-brand packing request for XCMG 360 excavator.

Why must the A2 170 mm clutch stay on the RFQ?

Pulley details are part of the product identity, not optional accessories for XCMG 360 excavator with 24V, A2 and 170 mm. For XCMG 360 excavator, the quoted drive should reproduce the alignment evidence from the removed compressor.

Which photos help confirm this XCMG 360 excavator compressor?

The most useful set combines an in-vehicle or in-machine view with clear bench photographs of every connection side for XCMG 360 excavator with 24V, A2 and 170 mm. Include the label, but do not rely on it as the only evidence for XCMG 360 excavator.

Source This XCMG 360 excavator A/C Compressor for Wholesale Supply

Send the product and program details in one RFQ: XCMG 360 excavator, 5H14, 24V, A2 and 170 mm, quantity, destination and packing. Elecdura will use the visible fitment evidence to review the requested complete assembly during the XCMG 360 excavator 24V, A2 and 170 mm review. A clear first enquiry also gives both parties a dependable reference if the XCMG 360 excavator compressor moves from sample evaluation into regular supply.