Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
5H14
XCMG
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
5H14 24V A2 132 mm configuration
XCMG 370 excavator
XCMG 370 excavator; confirm 5H14, 24V, A2 132 mm, connector, ports and mounting; confirm the twin-A clutch, 24V lead, ear mount and XCMG hose head
| Quantity: | |
|---|---|
Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this XCMG 370 excavator compressor important at quotation stage. The offered 5H14 compressor is a complete assembly for large-excavator service where machine utilization makes first-time fitment valuable, with twin-A 132 mm 24V SD5H14 configuration. Keeping 24V, A2 and 132 mm with the head and mounting layout helps the A/C parts distributor separate it from nearby variants.
The commercial value is clarity at handover: purchasing sees XCMG 370 excavator, the warehouse sees 24V, A2 and 132 mm, and the workshop sees the visible mounting layout. Those details allow the A/C parts distributor to assess the whole assembly before it enters stock.
| Application | XCMG 370 excavator |
|---|---|
| Compressor model | 5H14 |
| Pulley / clutch | A2 and 132 mm |
| Clutch voltage | 24V |
| Supply form | Complete aftermarket A/C compressor assembly |
| Supplied configuration | twin-A 132 mm 24V SD5H14 configuration |
The listed fields give the A/C parts distributor the product-level facts needed for a quote. They do not replace the machine service specification for XCMG 370 excavator with 24V, A2 and 132 mm. In particular, any oil balance, refrigerant charge or commissioning value omitted from the product data must be confirmed for XCMG 370 excavator.
For this 5H14 order, one front photograph is insufficient. The supplier needs separate angles showing the A2 clutch, hose head, electrical connection and feet, plus an installed XCMG 370 excavator view where space allows.
Confirm the twin-A clutch, 24V lead, ear mount and XCMG hose head. This product-specific detail, together with 24V, A2 and 132 mm, is what separates a useful fitment review from a generic 5H14 lookup.
The XCMG 360 line uses a much larger 170 mm clutch and cannot share this stock identity. Keep that distinction in the receiving note instead of depending on memory. A nearby 5H14 assembly for XCMG 370 excavator can share the housing outline while changing the belt, voltage or hose position; this order is for the 24V, A2 and 132 mm version.
The warehouse should be able to identify this XCMG 370 excavator compressor without opening a service manual or relying on the casting alone. A full stock description and the reference image provide that control during the XCMG 370 excavator 24V, A2 and 132 mm review.
Receiving should use the same XCMG 370 excavator evidence that purchasing approved. That means the product image, the 5H14 identification and 24V, A2 and 132 mm, followed by a visual check for impact damage or missing protective caps during the XCMG 370 excavator 24V, A2 and 132 mm review.
A fleet replacement is ready to install only after the surrounding circuit is ready for XCMG 370 excavator with 24V, A2 and 132 mm. For XCMG 370 excavator, inspect the belt, hoses, condenser airflow and contamination risk before putting the new 5H14 compressor into service.
For regional importers, the XCMG 370 excavator application can be combined with other confirmed heavy-duty compressor lines in one shipment. Each physical build retains its own image, quantity and receiving note through packing.
If purchasing is comparing suppliers, give each one the same XCMG 370 excavator application, 24V, A2 and 132 mm and photo evidence. Consistent input produces quotations that are easier to compare on scope, packing and delivery in the XCMG 370 excavator 24V, A2 and 132 mm order.
The answers focus on the decisions an A/C parts distributor faces before this XCMG 370 excavator assembly becomes repeat inventory.
Confirm XCMG 370 excavator, 24V, A2 and 132 mm, the connector, head and mounting ears while the ports remain capped. Hold any damaged or conflicting unit outside available stock.
List this 5H14 build separately from any neighboring variant and specify how many units are required for XCMG 370 excavator. Add destination, timing and carton or label expectations.
Port direction is one of the quickest ways to separate nearby 5H14 variants. The A/C parts distributor should keep that angle visible in both the approval file and receiving check.
Pulley details are part of the product identity, not optional accessories for XCMG 370 excavator with 24V, A2 and 132 mm. For XCMG 370 excavator, the quoted drive should reproduce the alignment evidence from the removed compressor.
Photograph the old 5H14 unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to XCMG 370 excavator.
Use XCMG 370 excavator, 5H14 and 24V, A2 and 132 mm together. Add the reference image and the mounting or port detail used to accept this physical build for XCMG 370 excavator.
Neutral cartons and buyer-brand labels can be discussed for qualified XCMG 370 excavator bulk programs. The physical product is confirmed before artwork or marking details for XCMG 370 excavator with 24V, A2 and 132 mm.
The XCMG 360 line uses a much larger 170 mm clutch and cannot share this stock identity. Treat that neighboring unit as a different product rather than an automatic 5H14 interchange for XCMG 370 excavator.
To source this compressor, share the intended XCMG 370 excavator use, order quantity and destination together with the old-unit photo set. Elecdura will review the drive and connection layout before confirming the wholesale offer for XCMG 370 excavator with 24V, A2 and 132 mm. Keeping these facts together helps the A/C parts distributor compare scope and avoids treating an unconfirmed 5H14 alternative as the quoted product.
