10S15C 24V B1 152 mm Heavy-Duty A/C Compressor for XCMG 470C excavator

Importer Check of the uncovered single-B 152 mm 24V unit A/C Compressor

The 24V coil is the electrical boundary for this XCMG 470C excavator item; the removed-unit connector should support that reading before stock is released. Any system-level value not listed for this assembly should be checked in the XCMG 470C excavator service documentation before installation.

Fleet Replacement 10S15C A/C Compressor for XCMG 470C excavator

When a buyer sends only the name 10S15C, several drive or head packages may still be possible; the XCMG 470C excavator application narrows the request.

Pricing can proceed cleanly when 10S15C, 24V, B1 and 152 mm are recorded beside the XCMG 470C excavator application.

Avoiding Wrong-Stock 10S15C A/C Compressor Returns for Distributors

The main return risk is a plausible-looking substitute: The dust-covered XCMG/Komatsu-style product must remain a separate SKU. The purchase order should state the visible separator.

If a buyer omits one of the 24V, B1 or 152 mm facts, the enquiry should return to the old-unit photos rather than jump to the nearest stock item.

Importer Fitment Evidence for the uncovered single-B 152 mm 24V unit A/C Compressor

Before the old core is returned, record the clutch face, connector, head orientation and the spacing between mounting ears.

The fitment decision should end with a visible ability to confirm that the original has no dust cover and match the B-section pulley, supported by the B1 152 mm drive package.

Importer Quotation Inputs for the XCMG 470C excavator A/C Compressor

This 10S15C assembly can be quoted for regional distribution, fleet supply or buyer-brand packaging rather than retail-only demand.

To price the correct XCMG 470C excavator unit, include volume, shipping country, packaging plan and the photo set used to confirm that the original has no dust cover and match the B-section pulley.

XCMG 470C excavator A/C Compressor Pre-Installation Review for Fleets

A short incoming inspection for uncovered single-B 152 mm 24V unit protects both the distributor and the workshop from a wrong-variant dispatch.

The workshop should diagnose the original failure, inspect belt tracking and check the A/C circuit for contamination before installing this XCMG 470C excavator replacement.

10S15C A/C Compressor FAQ for XCMG 470C excavator Wholesale Buyers

Use this buyer checklist when the old 10S15C unit and nearby variants look deceptively similar.

Before packing XCMG 470C excavator private-label orders, what should be resolved before commissioning this 10S15C replacement?

Find the reason the old XCMG 470C excavator compressor failed prior to fitting the replacement. For the XCMG 470C excavator workshop, inspect belt tracking, condenser airflow, hoses and circuit cleanliness, then use its machine data for evacuation, refrigerant and oil balance. Those checks protect the uncovered single-B 152 mm 24V unit assembly from an unresolved system fault.

Before packing XCMG 470C excavator private-label orders, what proves the 24V clutch requirement on this compressor?

Confirm the machine circuit and the marking on the original coil before ordering the XCMG 470C excavator assembly. On this XCMG 470C excavator request, the 24V connector photo can agree with the coil marking. The electrical reading is part of uncovered single-B 152 mm 24V unit, not an optional shipping choice.

During incoming inspection for XCMG 470C excavator, which physical check matters most before quoting this compressor?

One wider image of the XCMG 470C excavator installation can preserve hose and head orientation. Photograph the clutch face, head, hose connections and every mounting side on the XCMG 470C excavator machine. The buyer must be able to confirm that the original has no dust cover and match the B-section pulley for this uncovered single-B 152 mm 24V unit request.

During incoming inspection for XCMG 470C excavator, which nearby compressor build should a distributor keep separate?

Do not approve a substitution from 10S15C alone. The dust-covered XCMG/Komatsu-style product must remain a separate SKU. Review the B1 152 mm clutch, 24V connector, head and ears as a single XCMG 470C excavator assembly.

While planning XCMG 470C excavator importer stock, does the XCMG 470C excavator name prove fitment by itself?

Treat XCMG 470C excavator as the intended fitment request, then compare the machine plate and old-compressor photographs. Equipment revisions can alter brackets, connectors or ports, which is why the buyer still needs to confirm that the original has no dust cover and match the B-section pulley. The uncovered single-B 152 mm 24V unit description stays with the quoted unit.

During incoming inspection for XCMG 470C excavator, which details separate this XCMG 470C excavator A/C compressor from a family-name match?

The physical confirmation is to confirm that the original has no dust cover and match the B-section pulley. Write XCMG 470C excavator, 10S15C, 24V, B1 and 152 mm on the same RFQ line. For the XCMG 470C excavator order, that combination describes uncovered single-B 152 mm 24V unit without asking a family name to carry the whole decision.

On the XCMG 470C excavator fleet purchase line, which belt-drive facts should the buyer measure on the old unit?

Keep B1 and 152 mm together on the XCMG 470C excavator line because belt section, groove count and clutch diameter affect alignment. On the XCMG 470C excavator installation, a near-size pulley may move the belt path even when the 10S15C casting looks familiar. The old clutch face can support uncovered single-B 152 mm 24V unit.

During incoming inspection for XCMG 470C excavator, what information is needed for a bulk compressor offer?

Send the XCMG 470C excavator fitment request, 10S15C identity, quantity and destination with old-unit label and multi-angle photos. State uncovered single-B 152 mm 24V unit and ask the supplier to confirm that the original has no dust cover and match the B-section pulley. Keep packaging or buyer-brand requirements on a separate XCMG 470C excavator RFQ line so pricing stays attached to the right compressor.

Request a Wholesale 10S15C A/C Compressor Quote for XCMG 470C excavator

Send the required quantity, destination and packaging plan with the old-unit label and clear installation photographs. Include uncovered single-B 152 mm 24V unit and ask Elecdura to confirm that the original has no dust cover and match the B-section pulley before the XCMG 470C excavator compressor is priced.