Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10S15C
XCMG
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10S15C 24V B1 152 mm configuration
XCMG excavator / Komatsu-style mount
XCMG excavator / Komatsu-style mount; confirm 10S15C, 24V, B1 152 mm, connector, ports and mounting; confirm the dust cover, B-section pulley and direct-mount ears
| Quantity: | |
|---|---|
| Application | XCMG excavator / Komatsu-style mount |
|---|---|
| Compressor model | 10S15C |
| Pulley / clutch | B1, 152 mm |
| Clutch voltage | 24V |
| OE / reference | Not specified |
| Replacement type | Complete aftermarket A/C compressor assembly |
| Mounting check | confirm the dust cover, B-section pulley and direct-mount ears |
The 24V coil is the electrical boundary for this XCMG excavator / Komatsu-style mount item; the removed-unit connector should support that reading before stock is released. For XCMG excavator / Komatsu-style mount, refrigerant charge, oil quantity and workshop commissioning values come from the machine or vehicle service information when the product specification does not state them.
A nearby 10S15C assembly may share a casting, yet the uncovered 470C version is a distinct stock item even when core dimensions look close. Distributor staff should treat the difference as a new SKU.
If a buyer omits one of the 24V, B1 or 152 mm facts, the enquiry should return to the old-unit photos rather than jump to the nearest stock item.
Downtime on a XCMG excavator / Komatsu-style mount machine makes an approximate compressor quote expensive; this page therefore starts from the physical build.
For this single-B 152 mm 24V unit with dust cover request, the old unit should remain available until the buyer can confirm the dust cover, B-section pulley and direct-mount ears.
Elecdura supplies complete heavy-duty A/C compressors for distributor replenishment, fleet maintenance and qualified private-label programmes.
For this RFQ, send quantity, destination and packing requirements with the old-unit label and usable views that let the supplier confirm the dust cover, B-section pulley and direct-mount ears.
The old 10S15C compressor is the best fitment reference while the bracket, belt and hoses are still in their installed positions.
The fitment decision should end with a visible ability to confirm the dust cover, B-section pulley and direct-mount ears, supported by the B1 152 mm drive package.
Keep this XCMG excavator / Komatsu-style mount assembly out of mixed stock until its 24V lead and B1 152 mm clutch have been checked.
Before commissioning the single-B 152 mm 24V unit with dust cover assembly, the technician should follow the XCMG excavator / Komatsu-style mount service procedure for evacuation, refrigerant and oil balance.
Use this buyer checklist when the old 10S15C unit and nearby variants look deceptively similar.
Do not approve a substitution from 10S15C alone. The uncovered 470C version is a distinct stock item even when core dimensions look close. Compare the B1 152 mm clutch, 24V connector, head and ears as a single XCMG excavator / Komatsu-style mount assembly.
Save the exact product image beside the receiving record and retain the phrase single-B 152 mm 24V unit with dust cover. Name the stock line with XCMG excavator / Komatsu-style mount, 10S15C, 24V, B1 and 152 mm. The uncovered 470C version is a distinct stock item even when core dimensions look close.
The physical confirmation is to confirm the dust cover, B-section pulley and direct-mount ears. Write XCMG excavator / Komatsu-style mount, 10S15C, 24V, B1 and 152 mm on the same ordering line. For the XCMG excavator / Komatsu-style mount order, that combination describes single-B 152 mm 24V unit with dust cover without asking a family name to carry the whole decision.
On the XCMG excavator / Komatsu-style mount installation, a near-size pulley may move the belt path even when the 10S15C casting looks familiar. Retain B1 and 152 mm together on the XCMG excavator / Komatsu-style mount line because belt section, groove count and clutch diameter affect alignment. The old clutch face needs to support single-B 152 mm 24V unit with dust cover.
For the XCMG excavator / Komatsu-style mount workshop, inspect belt tracking, condenser airflow, hoses and circuit cleanliness, then use its machine data for evacuation, refrigerant and oil balance. Find the reason the old XCMG excavator / Komatsu-style mount compressor failed before fitting the replacement. Those checks protect the single-B 152 mm 24V unit with dust cover assembly from an unresolved system fault.
Photograph the clutch face, head, hose connections and every mounting side on the XCMG excavator / Komatsu-style mount machine. One wider image of the XCMG excavator / Komatsu-style mount installation needs to preserve hose and head orientation. The buyer must be able to confirm the dust cover, B-section pulley and direct-mount ears for this single-B 152 mm 24V unit with dust cover request.
State single-B 152 mm 24V unit with dust cover and ask the supplier to confirm the dust cover, B-section pulley and direct-mount ears. Provide the XCMG excavator / Komatsu-style mount application, 10S15C identity, quantity and destination with old-unit label and multi-angle photos. Retain packaging or buyer-brand requirements on a separate XCMG excavator / Komatsu-style mount RFQ line so pricing stays attached to the right compressor.
Elecdura can discuss neutral cartons, buyer-brand labels and packaging artwork for qualified bulk XCMG excavator / Komatsu-style mount programmes. First fix 10S15C, 24V, B1, 152 mm and single-B 152 mm 24V unit with dust cover. A clear identity prevents custom packing from concealing a mixed variant.
Send the required quantity, destination and packaging plan with the old-unit label and clear installation photographs. Include single-B 152 mm 24V unit with dust cover and ask Elecdura to confirm the dust cover, B-section pulley and direct-mount ears before the XCMG excavator / Komatsu-style mount compressor is priced.
