Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10K17A
Hitachi
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10K17A 24V B1 137 mm configuration
Hitachi construction machine
Hitachi construction machine; confirm 10K17A, 24V, B1 137 mm, connector, ports and mounting; confirm narrow feet, B groove, 137 mm clutch and the stated 51.5 mm feature
| Quantity: | |
|---|---|
A stopped Hitachi construction machine machine is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete aftermarket 10K17A A/C compressor is supplied for construction-equipment distributor stock requiring measurement-led identification. The page keeps narrow-foot single-B 137 mm 24V build with 51.5 mm catalog dimension together with the 24V, B1 and 137 mm drive on the warehouse description, giving the service-parts buyer one coherent product identity.
For Hitachi construction machine, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, B1 and 137 mm assembly with an image-based check of the head, connector and feet, which is especially useful for container consolidation.
| Application | Hitachi construction machine |
|---|---|
| Compressor model | 10K17A |
| Pulley / clutch | B1 and 137 mm |
| Clutch voltage | 24V |
| OE / cross reference | Not stated in the catalog |
| Supply form | Complete aftermarket A/C compressor assembly |
| Catalog configuration | narrow-foot single-B 137 mm 24V build with 51.5 mm catalog dimension |
For stock control, retain 24V, B1 and 137 mm with the Hitachi construction machine application and the complete-assembly description; shortening the line to 10K17A alone removes the details most likely to separate two look-alike units; vehicle-system values not shown in the table are confirmed from the specific service documentation.
A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to Hitachi construction machine. The fitment photographs should make each answer visible without a collage.
The approval photographs should make it possible to confirm narrow feet, B groove, 137 mm clutch and the stated 51.5 mm feature. If the visible evidence does not support that point, keep the Hitachi construction machine enquiry open instead of selecting by appearance.
Do not transfer 144/145 mm EX330 or EX200 dimensions to this product. This difference belongs in the distributor's master data and pick note so later Hitachi construction machine orders reproduce the approved build.
Keep the approved 10K17A build on its own quotation line; clarifying the clutch or head before dispatch costs less than recovering freight, labour and downtime after a plausible-looking unit fails the installation check.
A practical goods-in check starts with the warehouse description and ends with the physical assembly. Match Hitachi construction machine and 24V, B1 and 137 mm, inspect the mounting points, and photograph any discrepancy before stock is released.
A replacement 10K17A compressor cannot correct an unresolved A/C circuit fault. The technician should review belt alignment, airflow, leakage and system cleanliness, then use the oil and refrigerant procedure approved for Hitachi construction machine.
For regional importers, the Hitachi construction machine application can be combined with other confirmed heavy-duty compressor lines in one shipment. Each physical build retains its own image, quantity and warehouse description through packing.
If purchasing is comparing suppliers, give each one the same Hitachi construction machine application, 24V, B1 and 137 mm and photo evidence; consistent input produces quotations that are easier to compare on scope, packing and delivery.
The answers focus on the decisions a service-parts buyer faces before this Hitachi construction machine assembly becomes repeat inventory.
The warehouse description should carry Hitachi construction machine, 10K17A, 24V, B1 and 137 mm and a reference image. Together they give purchasing and receiving the same product definition.
Send the approved warehouse description, expected order quantity and receiving country; first-time enquiries should also include clear clutch, port and mounting photographs.
For the 24V, B1 and 137 mm 10K17A build used on Hitachi construction machine, the most useful set combines an in-vehicle or in-machine view with clear bench photographs of every connection side; include the label, but do not rely on it as the only evidence.
No. A 10K17A name narrows the search but does not settle the Hitachi construction machine fitment; the clutch, voltage, ports, electrical connection and feet remain part of the decision.
Give each physical build its own line, image and quantity. This keeps the Hitachi construction machine compressor separate through quotation, picking and packing.
For the 24V, B1 and 137 mm 10K17A build used on Hitachi construction machine, a different head can change outlet angle, fitting style or service access; compare the offered 10K17A port block directly with the removed compressor before shipment.
Do not transfer 144/145 mm EX330 or EX200 dimensions to this product. The alternative should retain its own image and item code until a separate Hitachi construction machine approval is complete.
Qualified programs may use buyer-brand labels or agreed cartons. The Hitachi construction machine product record remains fixed so packaging cannot blur a variant difference.
Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views; we will compare Hitachi construction machine, 24V, B1 and 137 mm, the connector, head and mounting layout before preparing the quotation. The result is a quotation built around the confirmed 24V, B1 and 137 mm compressor rather than a broad family description.
