10S13C 24V B1 152mm Heavy-Duty A/C Compressor for Hitachi ZX490 / 5A excavator

10S13C Heavy-Duty A/C Compressor Buying Case for Hitachi ZX490 / 5A excavator

Fleet service teams usually begin with an equipment name, but importers need a tighter record. Here, the practical ordering identity is Hitachi ZX490 / 5A excavator, 10S13C, 24V and B1 152mm. The 152 mm clutch distinguishes this ZX490/5A assembly from the 142 mm Hitachi 470 and two-wire Hitachi variants.

Distributor Fitment Checkpoints Beyond the Compressor Model

A buyer can reduce order mismatch risk by using one minimum photo and measurement task: measure the 152 mm B-section clutch and confirm the Hitachi 490 / 5A bracket and port layout. Where no readable OE reference is available on the removed unit, buyers should lead with 10S13C, 24V, B1 152mm, the application and clear photos of the compressor already on the vehicle.

The refrigerant is not stated in the available product information. Do not infer it from another 10S13C version; confirm the vehicle or equipment A/C system before charging. The service team should investigate why the previous compressor failed and correct contamination, restriction or oil-balance issues during pre-installation checks. A correct part number cannot compensate for an A/C circuit that remains dirty or mechanically restricted.

Fleet Downtime Risk from Ordering the Wrong A/C Compressor Variant

This product should be stored as a complete assembly and counted separately from clutches, coils, pulleys and repair parts. The item image, application line and 10S13C single-B 152 mm 24V excavator build description should stay together through RFQ response, packing and receiving.

When a fleet requests a replacement for Hitachi ZX490 / 5A excavator, 10S13C single-B 152 mm 24V excavator build provides the first practical filter for the sourcing conversation. At the parts counter, the buyer should measure the 152 mm B-section clutch and confirm the Hitachi 490 / 5A bracket and port layout. This check links 10S13C, 24V and B1 152mm to a real assembly and gives the warehouse an auditable reason to keep adjacent variants apart. The 152 mm clutch distinguishes this ZX490/5A assembly from the 142 mm Hitachi 470 and two-wire Hitachi variants.

For wholesalers, 10S13C single-B 152 mm 24V excavator build is more than a technical phrase; it is the boundary of this stock item. The 152 mm clutch distinguishes this ZX490/5A assembly from the 142 mm Hitachi 470 and two-wire Hitachi variants. The same description should appear in the inquiry response, buyer confirmation and warehouse note. When those three documents use the same identity, the risk of packing a neighboring 10S13C version drops and distributor-brand artwork can be prepared against the correct assembly.

Wholesale Specification Review: B1 152mm, 24V A/C Compressor

Private-Label Program Options for construction equipment A/C Compressors

Distributors, importers and fleet supply programs may request OEM/ODM cooperation, private labeling and generic export packaging. Program planning range normally starts at 50–100 pieces, with a 7–15 day expected dispatch window and an 18-month warranty. A final buyer quote follows the confirmed configuration and destination requirements.

RFQ Checklist for the 10S13C Heavy-Duty A/C Compressor

For RFQ reply, share the application, 10S13C, 24V, B1 152mm, photos from several angles and the expected requested quantity. Importers should also state whether they need neutral cartons, buyer branding, barcode labels or inspection documents. This prevents commercial details from being discussed against the wrong compressor.

Wholesale Questions about the Hitachi ZX490 / 5A excavator Heavy-Duty A/C Compressor

Why is the B1 152mm detail important to A/C compressor wholesalers?

Open the review with this stock-defining feature: 10S13C single-B 152 mm 24V excavator build. Then measure the 152 mm B-section clutch and confirm the Hitachi 490 / 5A bracket and port layout. The 10S13C casting alone does not close the fitment question, because this version combines 24V, B1 152mm and a particular physical layout for Hitachi ZX490 / 5A excavator. Include those observations and the target quantity in the inquiry so the response addresses this complete unit.

How can fleet workshops avoid a 24V A/C compressor mismatch?

First establish the feature that controls this stock record: 10S13C single-B 152 mm 24V excavator build. Then measure the 152 mm B-section clutch and confirm the Hitachi 490 / 5A bracket and port layout. The 10S13C casting alone does not close the fitment question, because this version combines 24V, B1 152mm and a particular physical layout for Hitachi ZX490 / 5A excavator. Include those observations and the buyer quantity in the inquiry so the response addresses this complete unit.

Does the application name alone identify this heavy-duty A/C compressor?

Do not approve an adjacent version simply because its main case is shared with the 10S13C family. The 152 mm clutch distinguishes this ZX490/5A assembly from the 142 mm Hitachi 470 and two-wire Hitachi variants. The parts-purchasing desk needs agreement on the electrical rating, clutch drive, connection head and installation-foot arrangement. A variance in any of these areas separates the item into another SKU that deserves its own photograph, carton mark and quoted line.

What does an importer need for a private-label A/C compressor quote?

Customer-brand packaging can be planned once 10S13C single-B 152 mm 24V excavator build and the rest of the assembly identity have been approved. Elecdura's normal program planning range is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. List the artwork, barcode and carton needs, inspection expectations and destination early enough for them to appear in the formal quote.

Can distributors order samples before a bulk A/C compressor program?

A sample can be discussed as a configuration-approval step before a bulk program, subject to availability and commercial terms. The buyer should still review 10S13C single-B 152 mm 24V excavator build, 24V, B1 152mm, the connector, ports and mounting against the removed compressor. A sample approval applies only to that exact build and does not authorize substitution across the wider 10S13C family.

How are similar 10S13C A/C compressor variants kept separate?

A nearby configuration is not an automatic substitute simply because its casting resembles the 10S13C family. The 152 mm clutch distinguishes this ZX490/5A assembly from the 142 mm Hitachi 470 and two-wire Hitachi variants. The trade purchaser needs agreement on the clutch voltage, clutch drive, line-entry geometry and body mounting pattern. Each mismatch moves the compressor to a separate SKU that deserves its own photograph, carton mark and quoted line.