Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10K17A
Hitachi
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10K17A 24V B1 145 mm configuration
Hitachi EX330 excavator rear-position configuration
Hitachi EX330 excavator rear-position configuration; confirm 10K17A, 24V, B1 145 mm, connector, ports and mounting; verify the rearward compressor position and hose route before removal
| Quantity: | |
|---|---|
A stopped Hitachi EX330 excavator rear-position configuration machine is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete aftermarket 10K17A A/C compressor is supplied for large-excavator repair where compressor position controls hose reach. The page keeps rear-position revised 10PA17C single-B 145 mm 24V assembly together with the 24V, B1 and 145 mm drive on the receiving note, giving the distributor parts desk one coherent product identity.
The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference; linking the Hitachi EX330 excavator rear-position configuration application to 24V, B1 and 145 mm gives that buyer a record suitable for purchasing and later replenishment.
| Application | Hitachi EX330 excavator rear-position configuration |
|---|---|
| Compressor model | 10K17A |
| Pulley / clutch | B1 and 145 mm |
| Clutch voltage | 24V |
| OE / cross reference | Not stated in the catalog |
| Supply form | Complete aftermarket A/C compressor assembly |
| Catalog configuration | rear-position revised 10PA17C single-B 145 mm 24V assembly |
The listed fields give the distributor parts desk the product-level facts needed for a quote. They do not replace the machine or truck service specification. In particular, any oil balance, refrigerant charge or commissioning value omitted from the product data must be confirmed for Hitachi EX330 excavator rear-position configuration.
A useful Hitachi EX330 excavator rear-position configuration photo set includes the clutch face, connector, port block and both mounting sides of the old unit; add one installed view for belt alignment and hose direction; together, those angles give the supplier more fitment evidence than the label alone.
Verify the rearward compressor position and hose route before removal. Record the result beside 24V, B1 and 145 mm and the Hitachi EX330 excavator rear-position configuration application so receiving can use the same evidence as purchasing.
The standard-position EX330 version shares model and clutch data but not the installation boundary; the safest stock decision is to keep that neighboring build separate until its clutch, ports and mounting pattern have their own approval.
For mixed inventory, store the approved Hitachi EX330 excavator rear-position configuration image beside the full application and drive description; receiving then has a quick visual reference and is less likely to combine two physical variants under a shortened stock name.
For repeat 10K17A purchases, receiving photos create a useful history of the approved build. Keep the ports sealed, inspect the exposed clutch and feet, and reconcile the delivered 24V, B1 and 145 mm unit with the Hitachi EX330 excavator rear-position configuration order.
Before installation on Hitachi EX330 excavator rear-position configuration, the workshop should identify why the previous compressor failed. Belt tracking, hose condition, condenser airflow and contamination may require attention before the new 10K17A unit is commissioned under the correct service procedure.
Fleet and aftermarket buyers can discuss volume pricing for this Hitachi EX330 excavator rear-position configuration compressor after the old-unit comparison is complete. That sequence lets commercial customization proceed without weakening the product identity.
The RFQ should let the supplier understand both the part and the program; combine the Hitachi EX330 excavator rear-position configuration fitment details with volume, destination, delivery window and packaging expectations, then attach the approved physical views.
The answers focus on the decisions a distributor parts desk faces before this Hitachi EX330 excavator rear-position configuration assembly becomes repeat inventory.
For the 24V, B1 and 145 mm 10K17A build used on Hitachi EX330 excavator rear-position configuration, the most useful set combines an in-vehicle or in-machine view with clear bench photographs of every connection side; include the label, but do not rely on it as the only evidence.
The technician should correct the original fault, verify belt alignment and prepare the circuit using the approved Hitachi EX330 excavator rear-position configuration oil and refrigerant process.
Separate quotation lines are the simplest control for a mixed shipment. Each line should link to the approved product image and receiving note.
Start with Hitachi EX330 excavator rear-position configuration and 10K17A; finish the identification with 24V, B1 and 145 mm and the visible head and mounting layout; this keeps a similar compressor from inheriting the order by name alone.
For the 24V, B1 and 145 mm 10K17A build used on Hitachi EX330 excavator rear-position configuration, a different head can change outlet angle, fitting style or service access; compare the offered 10K17A port block directly with the removed compressor before shipment.
The standard-position EX330 version shares model and clutch data but not the installation boundary. Recording that boundary helps the distributor parts desk avoid unplanned reordering during repeat supply.
State the 10K17A application, required volume, shipping country and delivery target; attach the old-unit photographs and note any neutral or buyer-brand packing request.
Neutral cartons and buyer-brand labels can be discussed for qualified Hitachi EX330 excavator rear-position configuration bulk programs. The physical product is approved before artwork or marking details.
Importers and fleet buyers can submit an RFQ for this 10K17A assembly with expected demand, delivery location and packing needs; include the approved Hitachi EX330 excavator rear-position configuration reference views to keep the physical build clear; that shared reference makes later questions about the clutch, mounting layout or private-label carton easier to resolve before production.
