10K17A 24V B1 Heavy-Duty A/C Compressor for Hitachi EX200-5 excavator

Hitachi EX200-5 excavator A/C Compressor for Distributor Stock

A stopped Hitachi EX200-5 excavator machine is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete aftermarket 10K17A A/C compressor is supplied for older excavator service where port clocking and feet width decide fit. The page keeps narrow-foot single-B 145 mm 24V left-15-degree O-ring assembly together with the 24V, B1 and 145 mm drive on the quotation line, giving the service-parts buyer one coherent product identity.

That combination helps importers separate this assembly from other 10K17A versions before freight and workshop time are committed. Once the Hitachi EX200-5 excavator application agrees with the removed-compressor views, Elecdura can discuss distributor replenishment and qualified private-label programs.

Wholesale A/C Compressor Specifications for Hitachi EX200-5 excavator

The table describes one saleable assembly rather than a menu of interchangeable options; on this Hitachi EX200-5 excavator line, 24V belongs with the B1 clutch and 145 mm diameter; system charge and oil values that are not published here remain subject to the approved service data for the exact installation.

Importer Photo Review for This 10K17A A/C Compressor

When the plate is incomplete, the removed compressor becomes the strongest physical reference for Hitachi EX200-5 excavator; clear views of the clutch, head, connector and feet preserve the details needed to distinguish this 10K17A build after it leaves the workshop.

Match left 15-degree O-ring ports, narrow feet and 145 mm clutch. This product-specific detail, together with 24V, B1 and 145 mm, is what separates a useful fitment review from a generic 10K17A lookup.

Fleet Parts Boundaries for This 10K17A A/C Compressor

The standard-position EX200-5 and right-angle PC120 products are different identities. The comparison matters because two 10K17A bodies can look related while creating different installation outcomes on Hitachi EX200-5 excavator.

If a distributor stocks both versions, use different item codes and bin references; the separation makes the Hitachi EX200-5 excavator configuration visible during quotation, receiving, picking and warranty review.

Distributor Receiving and Service Notes for This A/C Compressor

For repeat 10K17A purchases, receiving photos create a useful history of the approved build. Keep the ports sealed, inspect the exposed clutch and feet, and reconcile the delivered 24V, B1 and 145 mm unit with the Hitachi EX200-5 excavator order.

Before installation on Hitachi EX200-5 excavator, the workshop should identify why the previous compressor failed. Belt tracking, hose condition, condenser airflow and contamination may require attention before the new 10K17A unit is commissioned under the correct service procedure.

Distributor RFQ Details for This 10K17A A/C Compressor

This 10K17A configuration can enter a sample order, a fleet replacement program or regular distributor replenishment; commercial terms are discussed against the approved Hitachi EX200-5 excavator build, including quantity, packing and buyer-brand requirements.

The shortest route to an accurate quote is a complete line: Hitachi EX200-5 excavator, 10K17A, 24V, B1 and 145 mm, quantity and destination; attach clutch, head, connector and mounting views for the supplier's comparison.

Fleet Buyer FAQ for the Hitachi EX200-5 excavator A/C Compressor

Use this FAQ when preparing an RFQ or reviewing the physical 24V, B1 and 145 mm compressor for distributor stock.

What should a wholesale RFQ include for this 10K17A compressor?

A useful RFQ combines the part identity with the commercial program: Hitachi EX200-5 excavator, 24V, B1 and 145 mm, quantity, destination, schedule and packaging.

Can this Hitachi EX200-5 excavator compressor use private-label packing?

Qualified programs may use buyer-brand labels or agreed cartons. The Hitachi EX200-5 excavator product record remains fixed so packaging cannot blur a variant difference.

What wrong-stock risk applies to this B1 10K17A compressor?

The standard-position EX200-5 and right-angle PC120 products are different identities. Recording that boundary helps the service-parts buyer avoid warehouse mis-picks during repeat supply.

Which photos help confirm this Hitachi EX200-5 excavator compressor?

Send the clutch face, port block, connector, both mounting sides and one Hitachi EX200-5 excavator installed overview. Separate angles are easier to compare than a single collage.

How should a buyer describe this 10K17A compressor?

The working identity combines the Hitachi EX200-5 excavator application with 10K17A, 24V, B1 and 145 mm and the approved compressor view; none of those elements should be dropped from the first-order review.

Why must the B1 145 mm clutch stay on the RFQ?

Belt section, groove count and diameter affect alignment on Hitachi EX200-5 excavator. A nearby pulley cannot be accepted simply because the 10K17A housing looks familiar.

What workshop checks apply before fitting this B1 10K17A compressor?

Inspect the hose condition, condenser airflow and contamination risk as part of the replacement; the new compressor should enter a clean, correctly serviced Hitachi EX200-5 excavator circuit.

How should mixed 10K17A variants appear on a bulk order?

List application, drive and quantity for every variant, even when housings look alike. Receiving can then reconcile each compressor with its own reference image.

Source This Hitachi EX200-5 excavator A/C Compressor for Wholesale Supply

Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views; we will compare Hitachi EX200-5 excavator, 24V, B1 and 145 mm, the connector, head and mounting layout before preparing the quotation. The final offer can address product identity, volume, lead time and presentation without mixing this Hitachi EX200-5 excavator assembly with a similar configuration.