5H14 24V B1 145 mm Heavy-Duty A/C Compressor for Hitachi excavator -6 series

Wholesale 5H14 A/C Compressor for Hitachi excavator -6 series

Downtime on Hitachi excavator -6 series is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. The offered 5H14 compressor is a complete assembly for excavator parts distribution that separates otherwise similar generations, with single-B 145 mm 24V Sanden 508 / 5H14 configuration. Keeping 24V, B1 and 145 mm with the head and mounting layout helps the aftermarket purchasing team separate it from nearby variants.

For Hitachi excavator -6 series, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, B1 and 145 mm assembly with an image-based check of the head, connector and feet, which is especially useful for repeat stock.

Hitachi excavator -6 series A/C Compressor Data for Fleet Buyers

For stock control, retain 24V, B1 and 145 mm with the Hitachi excavator -6 series application and the complete-assembly description. Shortening the line to 5H14 alone removes the details most likely to separate two look-alike units for Hitachi excavator -6 series. Vehicle-system values not shown in the table are confirmed from the specific service documentation for Hitachi excavator -6 series with 24V, B1 and 145 mm.

Wholesale Mounting Review for This 5H14 A/C Compressor

A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to Hitachi excavator -6 series. The bench photographs should make each answer visible without a collage for Hitachi excavator -6 series with 24V, B1 and 145 mm.

Ask the supplier to verify the -6 application, B-belt clutch, connector and mounting ears. Combined with 24V, B1 and 145 mm, that check can expose an incorrect port direction, pulley or foot pattern before the compressor enters a wholesale shipment.

Wholesale Variant Control for the Hitachi excavator -6 series A/C Compressor

The -3 and -5 entries require their own application approval even with the same stated drive. The comparison matters because two 5H14 bodies can look related while creating different installation outcomes on Hitachi excavator -6 series.

Repeat Hitachi excavator -6 series orders should carry the same product image and configuration used for the original approval. That record is more dependable than choosing from a shelf of compressors by housing shape alone for Hitachi excavator -6 series with 24V, B1 and 145 mm.

Distributor Receiving and Service Notes for This A/C Compressor

The warehouse can inspect this Hitachi excavator -6 series assembly without opening the sealed ports. Confirm 24V, B1 and 145 mm, then compare the visible head and feet with the reference image. A damaged or conflicting compressor remains outside available stock until reviewed for Hitachi excavator -6 series with 24V, B1 and 145 mm.

Before installation on Hitachi excavator -6 series, the workshop should identify why the previous compressor failed. Belt tracking, hose condition, condenser airflow and contamination may require attention before the new 5H14 unit is commissioned under the correct service procedure for Hitachi excavator -6 series with 24V, B1 and 145 mm.

Wholesale Ordering Support for the Hitachi excavator -6 series A/C Compressor

Elecdura can quote this 5H14 compressor for sample evaluation, distributor restocking and mixed heavy-duty A/C shipments for Hitachi excavator -6 series with 24V, B1 and 145 mm. After the Hitachi excavator -6 series application and physical build are approved, qualified volumes can include neutral cartons, buyer-brand labels or agreed packaging artwork.

When requesting a sample, identify the target Hitachi excavator -6 series and the expected annual demand. the same Hitachi excavator -6 series enquiry can state whether the buyer needs neutral packing, branded labels or consolidation with other compressor models; receiving should use the 24V, B1 and 145 mm reference.

Importer FAQ for This 5H14 A/C Compressor

Before quantity is committed, these answers help the buyer connect 24V, B1 and 145 mm with fitment evidence and ordering requirements.

Can this Hitachi excavator -6 series compressor use private-label packing?

The aftermarket purchasing team can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements for Hitachi excavator -6 series with 24V, B1 and 145 mm.

Which details belong on the Hitachi excavator -6 series compressor order?

The working identity combines the Hitachi excavator -6 series application with 5H14, 24V, B1 and 145 mm and the confirmed compressor view. On the Hitachi excavator -6 series 24V, B1 and 145 mm order, none of those elements should be dropped from the first-order review.

What should a wholesale RFQ include for this 5H14 compressor?

List this 5H14 build separately from any neighboring variant and specify how many units are required for Hitachi excavator -6 series. Add destination, timing and carton or label expectations.

How should mixed 5H14 variants appear on a bulk order?

List application, drive and quantity for every variant, even when housings look alike. Receiving can then reconcile each compressor with its own reference image.

How should a buyer confirm the 24V clutch?

Compare the Hitachi excavator -6 series electrical circuit with the connector or label evidence on the removed unit. Keep 24V tied to the rest of the confirmed compressor configuration for Hitachi excavator -6 series.

Which photos help confirm this Hitachi excavator -6 series compressor?

Use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position for Hitachi excavator -6 series. Keep them with the warehouse description for repeat purchasing.

Why must the B1 145 mm clutch stay on the RFQ?

Keeping the clutch on the Hitachi excavator -6 series RFQ lets the supplier compare the actual drive rather than only the 5H14 family; this order is for the 24V, B1 and 145 mm version. It also gives receiving a measurable feature to check.

What wrong-stock risk applies to this B1 5H14 compressor?

The -3 and -5 entries require their own application approval even with the same stated drive. The alternative should retain its own image and item code until a separate Hitachi excavator -6 series approval is complete.

Ask for Bulk Pricing on the 5H14 A/C Compressor

Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views in the Hitachi excavator -6 series 24V, B1 and 145 mm order. We will compare Hitachi excavator -6 series, 24V, B1 and 145 mm, the connector, head and mounting layout before preparing the quotation. The final offer can address product identity, volume, lead time and presentation without mixing this Hitachi excavator -6 series assembly with a similar configuration.