7H13 24V B2 150 mm Heavy-Duty A/C Compressor for Hitachi 60-5 construction equipment

Hitachi 60-5 construction equipment A/C Compressor for Distributor Stock

Equipment dealers sourcing for Hitachi 60-5 construction equipment cannot rely on the compressor family alone when nearby builds use different heads or feet. The offered 7H13 compressor is a complete assembly for Hitachi 60-5 construction equipment maintenance where jobsite downtime and wrong-fit freight must be controlled, with B2 150 mm 24V 7H13 configuration. Keeping 24V, B2 and 150 mm with the head and mounting layout helps the fleet maintenance buyer separate it from nearby variants.

For a practical RFQ, pair the Hitachi 60-5 construction equipment application with views of the clutch, connector, head and mounting layout. The resulting order line can be checked by purchasing, receiving and the technician without reducing the product to a generic 7H13 name.

Wholesale A/C Compressor Specifications for Hitachi 60-5 construction equipment

For stock control, retain 24V, B2 and 150 mm with the Hitachi 60-5 construction equipment application and the complete-assembly description. Shortening the line to 7H13 alone removes the details most likely to separate two look-alike units for Hitachi 60-5 construction equipment. Vehicle-system values not shown in the table are confirmed from the specific service documentation for Hitachi 60-5 construction equipment with 24V, B2 and 150 mm.

Wholesale Mounting Review for This 7H13 A/C Compressor

A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to Hitachi 60-5 construction equipment. The removed-compressor views should make each answer visible without a collage.

Compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry for Hitachi 60-5 construction equipment. The same review needs to agree with 24V, B2 and 150 mm. A conflict at either point calls for clarification before the fleet maintenance buyer approves a substitute.

Wholesale Variant Control for the Hitachi 60-5 construction equipment A/C Compressor

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Hitachi 60-5 construction equipment. The safest stock decision is to keep that neighboring build separate until its clutch, ports and mounting pattern have their own approval during the Hitachi 60-5 construction equipment 24V, B2 and 150 mm review.

Keep the confirmed 7H13 build on its own quotation line for Hitachi 60-5 construction equipment. Clarifying the clutch or head before dispatch costs less than recovering freight, labour and downtime after a plausible-looking unit fails the installation check for Hitachi 60-5 construction equipment.

Importer Receiving Review for This 7H13 A/C Compressor

The receiving team does not need to dismantle the compressor for Hitachi 60-5 construction equipment with 24V, B2 and 150 mm. It only needs to confirm the visible configuration for Hitachi 60-5 construction equipment, check the protective caps and clutch area, and hold any unit that could create workshop delays.

Workshop preparation affects the life of this 7H13 assembly as much as the part choice for Hitachi 60-5 construction equipment with 24V, B2 and 150 mm. The Hitachi 60-5 construction equipment system should be checked for contamination, leakage, belt alignment and airflow before charging and commissioning.

Wholesale Ordering Support for the Hitachi 60-5 construction equipment A/C Compressor

A distributor may source this 7H13 unit as a stand-alone line or include it in a mixed A/C order in the Hitachi 60-5 construction equipment 24V, B2 and 150 mm order. The agreed Hitachi 60-5 construction equipment configuration remains fixed while carton style, labeling and delivery planning are quoted separately.

For pricing, send the required volume and shipping country with the Hitachi 60-5 construction equipment application and old-unit image set. If the fleet uses more than one 7H13 build, list each separately so quotation and packing keep the variants apart.

Fleet Buyer FAQ for the Hitachi 60-5 construction equipment A/C Compressor

The questions below address the fitment and purchasing details most likely to affect a Hitachi 60-5 construction equipment wholesale order.

What workshop checks apply before fitting this B2 7H13 compressor?

The technician should correct the original fault, verify belt alignment and prepare the circuit using the confirmed Hitachi 60-5 construction equipment oil and refrigerant process.

How should a buyer confirm the 24V clutch?

Confirm that Hitachi 60-5 construction equipment supplies the stated clutch voltage and that the connector agrees with the product image. Record the result with the complete 24V, B2 and 150 mm description.

Which photos help confirm this Hitachi 60-5 construction equipment compressor?

Provide individual views of the pulley, hose head, electrical lead and mounting feet, plus the compressor installed on Hitachi 60-5 construction equipment. The supplier can then compare one feature at a time during the Hitachi 60-5 construction equipment 24V, B2 and 150 mm review.

Can this Hitachi 60-5 construction equipment compressor use private-label packing?

The fleet maintenance buyer can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements for Hitachi 60-5 construction equipment with 24V, B2 and 150 mm.

How should a buyer describe this 7H13 compressor?

The working identity combines the Hitachi 60-5 construction equipment application with 7H13, 24V, B2 and 150 mm and the confirmed compressor view. On the Hitachi 60-5 construction equipment 24V, B2 and 150 mm order, none of those elements should be dropped from the first-order review.

What wrong-stock risk applies to this B2 7H13 compressor?

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Hitachi 60-5 construction equipment. Treat that neighboring unit as a different product rather than an automatic 7H13 interchange for Hitachi 60-5 construction equipment.

Is the 7H13 family number enough to confirm fitment?

Treat 7H13 as a family reference. The accepted Hitachi 60-5 construction equipment unit is the one whose drive and visible connection points agree with the old compressor.

What should a wholesale RFQ include for this 7H13 compressor?

List this 7H13 build separately from any neighboring variant and specify how many units are required. Add destination, timing and carton or label expectations.

Source This Hitachi 60-5 construction equipment A/C Compressor for Wholesale Supply

Begin with the exact 24V, B2 and 150 mm compressor requirement and the Hitachi 60-5 construction equipment application, then add quantity, schedule and labeling expectations. This gives Elecdura the information needed for a comparable supply quotation in the Hitachi 60-5 construction equipment 24V, B2 and 150 mm order. The final offer can address product identity, volume, lead time and presentation without mixing this Hitachi 60-5 construction equipment assembly with a similar configuration.