10K17A 24V B1 145 mm standard-position Heavy-Duty A/C Compressor for Hitachi EX200-5 excavator

Importer Guide to This 10K17A A/C Compressor

Equipment dealers sourcing for Hitachi EX200-5 excavator cannot rely on the compressor family alone when nearby builds use different heads or feet. This complete aftermarket 10K17A A/C compressor is supplied for older excavator service where head clocking and generation matter. The page keeps revised 10PA17C single-B 145 mm 24V standard-position unit together with the 24V, B1 and 145 mm drive on the purchase record, giving the heavy-duty importer one coherent product identity.

The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference; linking the Hitachi EX200-5 excavator application to 24V, B1 and 145 mm gives that buyer a record suitable for purchasing and later replenishment.

Distributor Specification Check for the 10K17A A/C Compressor

The listed fields give the heavy-duty importer the product-level facts needed for a quote. They do not replace the machine or truck service specification. In particular, any oil balance, refrigerant charge or commissioning value omitted from the product data must be confirmed for Hitachi EX200-5 excavator.

Fleet Fitment Evidence for the Hitachi EX200-5 excavator A/C Compressor

For this 10K17A order, one front photograph is insufficient. The supplier needs separate angles showing the B1 clutch, hose head, electrical connection and feet, plus an installed Hitachi EX200-5 excavator view where space allows.

Ask the supplier to compare B-section clutch, 145 mm diameter, head and standard mounting position. Combined with 24V, B1 and 145 mm, that check can expose an incorrect port direction, pulley or foot pattern before the compressor enters a wholesale shipment.

Wholesale Variant Control for the Hitachi EX200-5 excavator A/C Compressor

The left-angled O-ring version and EX200-6 product remain separate; that is the practical boundary between this product and the nearest look-alike. Purchasing can preserve it by retaining the configuration on the purchase record.

Alternative references can be useful for search, but they should lead back to the approved physical build; the heavy-duty importer still needs the clutch, head and mounting evidence before merging any stock lines.

Fleet Handling Checks for the Hitachi EX200-5 excavator A/C Compressor

The warehouse can inspect this Hitachi EX200-5 excavator assembly without opening the sealed ports. Confirm 24V, B1 and 145 mm, then compare the visible head and feet with the approved image. A damaged or conflicting compressor remains outside available stock until reviewed.

After fitment is confirmed, the technician still needs the approved Hitachi EX200-5 excavator service method; that includes correcting the original cause of failure and applying the specified oil balance, evacuation and refrigerant procedure for the vehicle or machine.

Private-Label 10K17A A/C Compressor Supply for Importers

Wholesale supply is available for Hitachi EX200-5 excavator fleet projects, repeat distributor stock and consolidated orders; Elecdura keeps this 10K17A build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting.

For container planning, state how many units of this exact 10K17A configuration are required and whether cartons need buyer marks; that buyer should keep any neighboring variant on a separate line.

Wholesale 10K17A A/C Compressor Questions from Buyers

These buyer questions connect the 10K17A product identity with quotation, receiving and workshop use for Hitachi EX200-5 excavator.

Why does port direction matter on this 10K17A compressor?

Hose routing has limited space around the Hitachi EX200-5 excavator installation; the approved product needs the connection side shown in the reference photographs, not merely a compatible body family.

What should a wholesale RFQ include for this 10K17A compressor?

State the 10K17A application, required volume, shipping country and delivery target. Attach the fitment photographs and note any neutral or buyer-brand packing request.

Which photos help confirm this Hitachi EX200-5 excavator compressor?

For the 24V, B1 and 145 mm 10K17A build used on Hitachi EX200-5 excavator, the most useful set combines an in-vehicle or in-machine view with clear bench photographs of every connection side; include the label, but do not rely on it as the only evidence.

Is the 10K17A family number enough to confirm fitment?

The family number is useful for enquiry routing, not final approval. This Hitachi EX200-5 excavator order still depends on 24V, B1 and 145 mm and the confirmed head and mounting arrangement.

Can this Hitachi EX200-5 excavator compressor use private-label packing?

Purchasing can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements.

Why must the B1 145 mm clutch stay on the RFQ?

A compressor body may accept several clutch builds, but the vehicle or machine belt path does not; the ordering team should retain this pulley description through quotation and packing.

What wrong-stock risk applies to this B1 10K17A compressor?

The left-angled O-ring version and EX200-6 product remain separate. Keep the two builds on separate quotation and warehouse lines for Hitachi EX200-5 excavator.

What identifies this Hitachi EX200-5 excavator A/C compressor?

Describe the unit as the 24V, B1 and 145 mm 10K17A assembly for Hitachi EX200-5 excavator, then attach the fitment photographs. That is more specific than a model-family number by itself.

Ask for Bulk Pricing on the 10K17A A/C Compressor

Send the product and program details in one RFQ: Hitachi EX200-5 excavator, 10K17A, 24V, B1 and 145 mm, quantity, destination and packing; Elecdura will use the visible fitment evidence to review the requested complete assembly. Keeping these facts together helps the heavy-duty importer compare scope and avoids treating an unconfirmed 10K17A alternative as the quoted product.