28100-E0080 Hino Starter Motor 24V 5.0kW 11T

28100-E0080 Heavy-Duty Truck Starter Motor for HINO J08E

For aftermarket product managers confirming commercial terms, this aftermarket heavy-duty truck starter motor is specified for HINO J08E with 24V, 5.0kW and 11T. The page keeps the replacement identity, technical definition and wholesale order information in one place.

For engine-parts specialists planning mixed-model inventory, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

28100-E0080 Starter Motor Specifications and Technical Drawing

For service-parts networks reviewing drive-end geometry, this reference group can cover nearby starter versions. Keep 28100-E0080, 24V, 5.0kW and 11T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For importers comparing nearby starter versions, the source-faithful technical drawing records the available mounting information for 28100-E0080, including Ø142, 30±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

28100-E0080 Aftermarket Replacement and Application

For fleet-parts buyers confirming the stated application, 28100-E0080, 03655020017, 03655020141 forms the usable OE and cross-reference group for this product, while HINO J08E is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For technical sales teams checking application evidence, the old starter should agree with the approved drive-end, side and rear views. Confirm the 11T pinion and module 3, then keep any different flange or terminal layout outside the current priced item.

28100-E0080 Wholesale Supply for Distributors and Importers

For sourcing managers planning a repeat order, 28100-E0080 is available for professional aftermarket supply to commercial-vehicle distributors, fleet-parts suppliers and importers. Ask for wholesale pricing with quantity, destination and packaging requirements; standard terms are 20 pcs MOQ, 7–15 days after confirmation and 18 months warranty.

For wholesale program managers setting packaging requirements, available quality support includes armature, solenoid, no-load and load testing. Buyers may define sampling, report format, reference labels, terminal protection and carton marks before production so the shipment can be checked against the approved order specification.

28100-E0080 Starter Motor Buyer FAQ

What must be matched before quoting HINO J08E production changes before stock is assigned?

For purchasing teams checking application evidence, HINO J08E may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match 28100-E0080, 24V, 5.0kW and 11T to the old starter. A changed suffix, flange or terminal layout should open a separate review for that machine.

Which check should lead mounting-hole pattern for repeatable sourcing?

For distributors preparing an OE-based quote, A complete mounting-hole callout is not stated for 28100-E0080. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

Which check should lead 28100-E0080 inquiry package during an application review?

For aftermarket product managers setting packaging requirements, A useful inquiry for 28100-E0080 includes quantity, destination, required date, HINO J08E, the full old-unit number and clear photos of the label, drive end, locating face and rear connections. State neutral or private-label packaging needs at the same time. Elecdura can then quote the 24V, 5.0kW, 11T version against an exact starter specification.

Which detail separates 28100-E0080 ring-gear engagement before stock is assigned?

For engine-parts specialists matching the unit taken from service, review the 11T pinion, module 3, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

How should a distributor confirm 28100-E0080 cartons and units when preparing a product query?

For regional parts suppliers preparing distributor pricing, sample cartons from different positions in the shipment and compare the 28100-E0080 labels, 24V marking, 11-tooth pinion, flange shape and terminal protection with the procurement specification. Photograph any mixed marking, damaged terminal or different drive end at the installation review, and isolate those pieces so the rest of the lot can be assessed consistently.

What should receiving teams compare on HINO J08E when several versions look alike?

For technical sales teams comparing nearby starter versions, HINO J08E identifies the intended commercial-vehicle family, but it should not be used by itself. Pair the application with 28100-E0080, the 24V electrical system and the 11-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration during quotation and schedule review.

What must be matched before quoting 28100-E0080 label and suffix before stock is assigned?

For fitment reviewers separating similar housings, photograph the complete old-unit label for 28100-E0080, including every prefix, suffix and separator. Shortened numbers can group starters that differ in voltage, output, drive or housing. Pair the label with a front and rear view, then retain the full marking in the RFQ and purchase order so later receiving checks use the same identity.

Which specification deserves priority for 28100-E0080 replenishment before accepting a substitute?

For wholesale program managers defining label requirements, keep 28100-E0080, 24V, 5.0kW, 11T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different removed unit appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

Request a Wholesale Quote for 28100-E0080 Heavy-Duty Truck Starter Motor

For sales teams planning replenishment, ask for a quote on 28100-E0080 with the full HINO J08E record, quantity and packaging plan. We will verify the requested 24V, 5.0kW and 11T configuration and return the relevant wholesale terms.