0365 Hino K13C 24V 6.0kW Starter Motor Distributor Supply

0365 Hino K13C Starter Motor Wholesale Overview

The 0365 starter for Hino K13C is intended for replacement demand. It combines 24V, 6.0kW output with the 11T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.

Fleet workshop teams handling seasonal service should send 0365, the Hino K13C record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address cleaner branch replenishment, urgent dispatch options and the correct physical configuration in one useful commercial offer.

0365 Starter Motor Data for Distributor Review

The key fit controls are 11T pinion and 47.5mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

Alongside the mounting comparison, verify 24V, 6.0kW, 11T and the position of each connection. The combination provides a much safer purchasing identity than a single cross-reference, particularly for distributors supporting several engine or machine families.

0365 Starter Motor Distributor Reorder Identification

When a buyer provides 0365 602 0014 / 28100-2863A, record whether each reference came from a label, invoice or service record, and keep the complete 0365 format on the quotation. The final choice must also agree with the actual application and physical unit.

For seasonal service, keep 0365, Hino K13C, 24V, 6.0kW and 11T on one purchasing record. At goods-in, review drive-end geometry before releasing the lot. This gives the fleet workshop a documented basis for cleaner branch replenishment when the next order is raised.

0365 Starter Motor Export Supply and Inventory Planning

Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.

Demand from a roadside repair network should keep 0365 tied to Hino K13C. For seasonal service, the fleet workshop can use a central-to-branch transfer plan, hold one incoming unit for comparison and review drive-end geometry at goods-in. This supports cleaner branch replenishment while keeping urgent dispatch options visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0365 application and specification shown above for their own product comparison.

0365 Hino K13C Starter Motor FAQs

How can a fleet workshop source 0365 for seasonal service?

Fleet workshop teams should tie 0365 to Hino K13C, 24V, 6.0kW, 11T and the removed-unit photographs before requesting price. For seasonal service, state quantity, destination and delivery timing, then review drive-end geometry. Ask Elecdura to address urgent dispatch options and cleaner branch replenishment in the same quotation.

For seasonal service handled by a fleet workshop, how can a distributor plan stock for 0365?

Use active Hino K13C customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Keep 0365 traceable through seasonal service.

To support cleaner branch replenishment, is a matching 11T pinion enough to approve 0365?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 47.5mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Keep 0365 traceable through seasonal service.

During seasonal service, how should 24V be confirmed for 0365?

Check the machine electrical system, old-starter label and service record before ordering. Keep 6.0kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Use 0365 when arranging urgent dispatch options.

Drive-end geometry check: What should receiving staff inspect on the 0365 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Hino K13C inventory. Keep 0365 traceable through seasonal service.

Cleaner branch replenishment: How can workshops photograph 0365 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Retain 0365 for cleaner branch replenishment and receiving review.

Urgent dispatch options question: What should be checked before installing the 0365 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain 0365 for cleaner branch replenishment and receiving review.

During seasonal service, what lead-time details should be stated for the 0365 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the 0365 result into urgent dispatch options.

Ask for 0365 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 0365, Hino K13C details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 11T offer, availability, packing, lead time and freight options.