0330 552 0420 Hino DK10/ DS70 24V 4.5kW Starter Motor Bulk Supply

0330 552 0420 Hino DK10/ DS70 Starter Motor Distributor Sourcing

For Hino DK10/ DS70 service, 0330 552 0420 is a focused wholesale line rather than a general starter listing. The 24V system, 4.5kW output and 13T drive identify one specific configuration. It serves Hino DK10/ DS70 replacement demand while keeping the 4.5kW output and 13T drive separate from nearby starter families. Keep this purchase identity clear for quotation and repeat supply.

Regional parts dealer teams handling seasonal service should send 0330 552 0420, the Hino DK10/ DS70 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address more reliable receiving checks, repeat-order carton marks and the correct physical configuration in one useful commercial offer.

0330 552 0420 Starter Motor B2B Specification

Use 13T pinion and 46mm reference, mounting face, drive reach, solenoid position and terminal orientation as the main physical checkpoints. Confirm the complete mounting pattern before comparing shaft reach, because accepting one matching ear or one outside dimension can hide a different flange index and lead to unnecessary installation work.

A correct replacement must satisfy both the 24V 4.5kW electrical requirement and the 13T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.

0330 552 0420 Starter Motor Cross-References for Wholesale Supply

When a buyer provides 0330 552 0420, record whether the reference came from a label, invoice or service record, and keep the complete 0330 552 0420 format on the quotation. The final choice must also agree with the actual application and physical unit.

For seasonal service, keep 0330 552 0420, Hino DK10/ DS70, 24V, 4.5kW and 13T on one purchasing record. At goods-in, review voltage marking and battery setup before releasing the lot. This gives the regional parts dealer a documented basis for more reliable receiving checks when the next order is raised.

0330 552 0420 Starter Motor B2B Supply for Hino DK10/ DS70

Elecdura works with importers, parts distributors, rebuilders and fleet-service businesses. A typical order starts at 20 pieces and takes 7–15 days after confirmation, with neutral packaging, private-label review and an 18-month warranty available under the final commercial agreement.

Demand from a branch service counter should keep 0330 552 0420 tied to Hino DK10/ DS70. For seasonal service, the regional parts dealer can use a branch-specific reorder point, keep the flange measurement sheet and review voltage marking and battery setup at goods-in. This supports more reliable receiving checks while keeping repeat-order carton marks visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0330 552 0420 application and specification shown above for their own product comparison.

0330 552 0420 Hino DK10/ DS70 Starter Motor FAQs

How can a regional parts dealer source 0330 552 0420 for seasonal service?

Regional parts dealer teams should tie 0330 552 0420 to Hino DK10/ DS70, 24V, 4.5kW, 13T and the removed-unit photographs before requesting price. For seasonal service, state quantity, destination and delivery timing, then review voltage marking and battery setup. Ask Elecdura to address repeat-order carton marks and more reliable receiving checks in the same quotation.

For repeat-order carton marks, when is a sample order useful for 0330 552 0420?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Carry the 0330 552 0420 result into repeat-order carton marks.

During seasonal service, what information helps review the 0330 552 0420 warranty enquiry?

Provide the invoice or lot reference, installation date, Hino DK10/ DS70 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. File 0330 552 0420 with the voltage marking and battery setup check.

To support more reliable receiving checks, can 0330 552 0420 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Link 0330 552 0420 photographs to the voltage marking and battery setup record.

To support more reliable receiving checks, what lead-time details should be stated for the 0330 552 0420 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Use 0330 552 0420 when arranging repeat-order carton marks.

For seasonal service handled by a regional parts dealer, is a matching 13T pinion enough to approve 0330 552 0420?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 46mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Keep 0330 552 0420 traceable through seasonal service.

Repeat-order carton marks question: How can workshops photograph 0330 552 0420 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. This supports more reliable receiving checks for 0330 552 0420.

For repeat-order carton marks, what should receiving staff inspect on the 0330 552 0420 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Hino DK10/ DS70 inventory. Keep 0330 552 0420 traceable through seasonal service.

Send 0330 552 0420 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with 0330 552 0420, Hino DK10/ DS70 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.5kW 13T offer, availability, packing, lead time and freight options.