28100-E0300-24V-6.0KW-11T-3.5M Hino Starter Motor

28100-E0300-24V-6.0KW-11T-3.5M Heavy-Duty Truck Starter Motor for HINO P11C

For inventory buyers confirming commercial terms, 28100-E0300-24V-6.0KW-11T-3.5M supports truck, bus and fleet replacement programs for HINO P11C. This heavy-duty truck starter motor is defined by its 24V electrical system, 6.0kW output and 11T pinion, giving distributors a practical basis for quotation and stock matching.

For fleet-parts buyers planning mixed-model inventory, the commercial value is a clearly identified starter rather than a generic visual match. Buyers can use the OE group, application, product images and technical data together, while neutral packaging and private-label review can be discussed for qualified bulk orders.

28100-E0300-24V-6.0KW-11T-3.5M Starter Motor Specifications and Technical Drawing

For fleet-parts buyers reviewing drive-end geometry, the 11T pinion and module 3.5 are important replacement identifiers. Match them with the flange and drive projection to protect the ring gear from an incorrect tooth pitch or engagement depth.

For technical sales teams comparing nearby starter versions, the source-faithful technical drawing records the available mounting information for 28100-E0300-24V-6.0KW-11T-3.5M, including Ø160; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

28100-E0300-24V-6.0KW-11T-3.5M Aftermarket Replacement and Application

For equipment-parts dealers confirming the stated application, match 28100-E0300-24V-6.0KW-11T-3.5M to HINO P11C and keep the related numbers 28100-E0300-24V-6.0KW-11T-3.5M, 28100-E0300 on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For purchasing teams checking application evidence, A direct replacement decision should combine the OE group with physical comparison. Check the mounting face, 11T drive and cable-stud direction, and ask for a separate review when one of those features differs.

28100-E0300-24V-6.0KW-11T-3.5M Wholesale Supply for Distributors and Importers

For distributors building a new starter range, wholesale enquiries for 28100-E0300-24V-6.0KW-11T-3.5M can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For aftermarket product managers setting packaging requirements, the order can specify testing scope, sampling level, label content and packing details. Reference-label, drive-end and terminal-protection photos may also be requested before shipment for the agreed product version.

28100-E0300-24V-6.0KW-11T-3.5M Starter Motor Buyer FAQ

What should receiving teams compare on 11T and module 3.5 when checking a replacement proposal?

For service-parts networks checking application evidence, the supplied drive uses 11 teeth with module 3.5. Count the old pinion teeth and compare outside diameter, rest position and engagement depth at inquiry stage. The 3.5 module is part of the gear definition, so another pitch must not be combined on the same line. This check protects the ring gear from an incorrect mesh.

How should a distributor confirm 28100-E0300-24V-6.0KW-11T-3.5M technical claim evidence when checking a replacement proposal?

For importers building a new starter range, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the HINO P11C equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

What should receiving teams compare on HINO P11C cranking condition before a purchase order is released?

For product managers checking repeat-order specifications, before replacing the starter on HINO P11C, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 6.0kW starter and make a service question easier to resolve.

How should a distributor confirm 28100-E0300-24V-6.0KW-11T-3.5M label and suffix before stock is assigned?

For maintenance suppliers matching the removed unit, photograph the complete old-unit label for 28100-E0300-24V-6.0KW-11T-3.5M, including every prefix, suffix and separator. Shortened numbers can group starters that differ in voltage, output, drive or housing. Pair the label with a front and rear view, then retain the full marking in the RFQ and purchase order so later receiving checks use the same identity.

Which comparison prevents a mismatch for 6.0kW output on HINO P11C for warehouse identification?

For equipment-parts dealers reviewing drive-end geometry, the 6.0kW rating belongs to the 28100-E0300-24V-6.0KW-11T-3.5M configuration used for HINO P11C. Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

What should receiving teams compare on 28100-E0300-24V-6.0KW-11T-3.5M stock identification when checking a replacement proposal?

For purchasing teams opening a first bulk order, label the storage location with 28100-E0300-24V-6.0KW-11T-3.5M, 24V, 6.0kW and 11T, and keep a verified drive-end and rear-view image with the item master. Do not combine similarly shaped Hino units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

How should a workshop distinguish 28100-E0300-24V-6.0KW-11T-3.5M among Hino versions when confirming the priced item?

For distributors preparing a technical RFQ, 28100-E0300-24V-6.0KW-11T-3.5M should remain separate from another Hino starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 6.0kW and 11T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

Which comparison prevents a mismatch for 28100-E0300-24V-6.0KW-11T-3.5M drawing dimensions when checking a replacement proposal?

For technical buyers evaluating a direct replacement, read the 28100-E0300-24V-6.0KW-11T-3.5M drawing as a comparison aid, not as permission to ignore the removed unit. Check every visible diameter, hole callout, length and angle that affects seating or engagement, then confirm the terminal view from the product photos. The drawing is schematic and not to scale, so decisions must follow the printed values rather than a visual estimate from the image.

Request a Wholesale Quote for 28100-E0300-24V-6.0KW-11T-3.5M Heavy-Duty Truck Starter Motor

For engine-parts specialists planning replenishment, send 28100-E0300-24V-6.0KW-11T-3.5M, 28100-E0300, the HINO P11C application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 6.0kW, 11T version and prepare a product-specific wholesale quotation.