300516-00034A Daewoo Starter Motor 12V 3.5kW 11T

300516-00034A Construction Equipment Starter Motor for DAEWOO D24C (DX60-9C)

For sales teams building a new starter range, this aftermarket construction equipment starter motor is specified for DAEWOO D24C (DX60-9C) with 12V, 3.5kW and 11T. The page keeps the replacement identity, technical definition and distributor purchase information in one place.

For warehouse planners requesting production pricing, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

300516-00034A Starter Motor Specifications and Technical Drawing

For distributors confirming electrical ratings, because no dimensional drawing is available for this version, the approved product views, full reference and 12V 3.5kW 11T specification should be compared with the starter being replaced. Customer measurements can then complete the fitment review without introducing unverified dimensions.

For technical buyers reviewing a replacement proposal, A dimensional drawing was not supplied for 300516-00034A. For a fitment enquiry, provide straight-on images of the mounting face and drive end plus the locating diameter, hole spacing, pinion projection and terminal direction measured from the starter being replaced.

300516-00034A Aftermarket Replacement and Application

For importers evaluating a direct replacement, match 300516-00034A to DAEWOO D24C (DX60-9C) and keep the related numbers 300516-00034A, 1200952 on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For product managers reviewing drive-end geometry, use the gallery to compare the flange, 11T pinion and rear connections before approving the order. A changed mounting or terminal feature should be quoted as another starter version.

300516-00034A Wholesale Supply for Distributors and Importers

For fleet-parts buyers opening a first stocking order, wholesale enquiries for 300516-00034A can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For private-label buyers confirming an incoming batch, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

300516-00034A Starter Motor Buyer FAQ

What should receiving teams compare on flange clocking for repeatable sourcing?

For fitment reviewers reviewing drive-end geometry, no separate angular callout is stated for 300516-00034A. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

Which detail separates DAEWOO D24C (DX60-9C) cranking condition for a first stocking order?

For application specialists comparing nearby starter versions, before replacing the starter on DAEWOO D24C (DX60-9C), test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 12V, 3.5kW starter and make a fitment check easier to resolve.

What must be matched before quoting DAEWOO D24C (DX60-9C) production changes when confirming the quotation line?

For replacement-parts sellers preparing a technical RFQ, DAEWOO D24C (DX60-9C) may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match 300516-00034A, 12V, 3.5kW and 11T to the original unit in hand. A changed suffix, flange or terminal layout should open a separate review for that machine.

What should purchasing verify first for 300516-00034A inside a mixed starter shipment when checking a replacement proposal?

For warehouse planners preparing a volume quote, give each carton line its own reference, 12V, 3.5kW and 11T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

How can an importer validate 300516-00034A solenoid and cable routing when confirming the offer line?

For importers confirming electrical ratings, use the side and rear photographs of 300516-00034A to check solenoid position, battery-stud direction and start-terminal access in DAEWOO D24C (DX60-9C). Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What should purchasing verify first for DAEWOO D24C (DX60-9C) previously replaced starter for warehouse identification?

For product managers reviewing a replacement proposal, ask whether the starter removed from DAEWOO D24C (DX60-9C) is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with 300516-00034A, 12V, 3.5kW and 11T before turning that history into a bulk stocking decision.

Which detail separates 11T and the measured pinion pitch before accepting a substitute?

For maintenance suppliers confirming the stated application, the supplied drive uses 11 teeth. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before the PO is released. Where the pitch is not printed, measure it or provide a close drive-end photo for review. This check protects the ring gear from an incorrect mesh.

Which comparison prevents a mismatch for 300516-00034A side-profile photograph for repeatable sourcing?

For equipment-parts dealers checking application evidence, the side profile of 300516-00034A shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use measured axial references where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

Request a Wholesale Quote for 300516-00034A Construction Equipment Starter Motor

For purchasing teams preparing a volume quote, ask for a quote on 300516-00034A with the full DAEWOO D24C (DX60-9C) record, quantity and packaging plan. We will verify the requested 12V, 3.5kW and 11T configuration and return the relevant wholesale terms.