300516-0040A Daewoo Starter Motor 24V 5.0kW 11T

300516-0040A Construction Equipment Starter Motor for DAEWOO D34D (DX120)

For engine-parts specialists building a new starter range, 300516-0040A supports excavator, loader and off-highway replacement programs for DAEWOO D34D (DX120). This construction equipment starter motor is defined by its 24V electrical system, 5.0kW output and 11T pinion, giving distributors a practical basis for quotation and stock matching.

For regional parts suppliers requesting production pricing, accurate version control reduces avoidable returns and mixed stock. The gallery, technical drawing where available, and order information below give commercial and technical teams a shared basis for the RFQ.

300516-0040A Starter Motor Specifications and Technical Drawing

For importers confirming electrical ratings, the product identity combines 300516-0040A, DAEWOO D34D (DX120), 24V, 5.0kW and 11T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For product managers reviewing a replacement proposal, the source-faithful technical drawing records the available mounting information for 300516-0040A, including 3×Ø11, 64±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

300516-0040A Aftermarket Replacement and Application

For technical sales teams evaluating a direct replacement, the replacement search starts with 300516-0040A and the DAEWOO D34D (DX120) application. For mixed fleets or previously repaired machines, add clear old-unit photos so a substituted starter does not become the only fitment evidence.

For fitment reviewers reviewing drive-end geometry, the removed unit should agree with the approved drive-end, side and rear views. Confirm the 11T pinion and module 3, then keep any different flange or terminal layout outside the current priced item.

300516-0040A Wholesale Supply for Distributors and Importers

For wholesale program managers opening a first bulk order, Elecdura supplies 300516-0040A for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For sales teams confirming an incoming batch, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

300516-0040A Starter Motor Buyer FAQ

What should receiving teams compare on 3×Ø11 and 64±1 mm before comparing delivery options?

For distributors comparing the flange and terminals, use the supplied technical drawing to compare 3×Ø11 and 64±1 mm. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

What should receiving teams compare on 300516-0040A rear-terminal photograph when confirming the priced item?

For technical buyers comparing nearby starter versions, use the rear view of 300516-0040A to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in DAEWOO D34D (DX120). A correct drive end with an unusable terminal position is not a complete fitment match.

What should receiving teams compare on 300516-0040A order testing for a first trade order?

For engine-parts specialists confirming an incoming batch, Elecdura can discuss armature, solenoid, no-load and load testing for 300516-0040A. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 5.0kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

How can a buyer screen locating diameter for repeatable sourcing?

For fleet-parts buyers checking version-defining data, no locating diameter is published for 300516-0040A. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

What should receiving teams compare on 300516-0040A ring-gear engagement when confirming the quoted item?

For technical sales teams confirming electrical ratings, review the 11T pinion, module 3, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

What should receiving teams compare on 11T and module 3 before accepting a substitute?

For fitment reviewers reviewing a replacement proposal, the supplied drive uses 11 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before stock is committed. The 3 module is part of the gear definition, so another pitch must not be combined on the one stock line. This check protects the ring gear from an incorrect mesh.

Which comparison prevents a mismatch for 5.0kW output on DAEWOO D34D (DX120) before comparing delivery options?

For application specialists confirming the stated application, the 5.0kW rating belongs to the 300516-0040A configuration used for DAEWOO D34D (DX120). Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

How should a workshop distinguish 300516-0040A among Daewoo versions when checking a replacement proposal?

For replacement-parts sellers checking application evidence, 300516-0040A should remain separate from another Daewoo starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 5.0kW and 11T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

Request a Wholesale Quote for 300516-0040A Construction Equipment Starter Motor

For warehouse planners preparing a volume quote, send 300516-0040A, the DAEWOO D34D (DX120) application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 5.0kW, 11T version and prepare a product-specific wholesale quotation.