65.26201-7067A-12V-9.0KW-10T-3M Daewoo Starter Motor

65.26201-7067A-12V-9.0KW-10T-3M Construction Equipment Starter Motor for DAEWOO generator set

For sales teams planning mixed-model inventory, 65.26201-7067A-12V-9.0KW-10T-3M is an aftermarket construction equipment starter motor for DAEWOO generator set. Its 12V system, 9.0kW output and 10T pinion give construction-equipment parts distributors, importers and fleet suppliers a clear product definition for OE-reference replacement and repeat-order sourcing.

For warehouse planners updating a customer item master, the product is positioned for professional aftermarket supply, with product identification, fitment boundaries, inspection options and commercial terms visible before the buyer requests pricing.

65.26201-7067A-12V-9.0KW-10T-3M Starter Motor Specifications and Technical Drawing

For distributors comparing nearby starter versions, the 9.0kW output makes the electrical match especially important. Confirm the 12V system, cable capacity, grounds and the old starter rating before approving this configuration for a batch order.

For technical buyers separating similar housings, the source-faithful technical drawing records the available mounting information for 65.26201-7067A-12V-9.0KW-10T-3M, including Ø146, 48±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

65.26201-7067A-12V-9.0KW-10T-3M Aftermarket Replacement and Application

For importers checking application evidence, 65.26201-7067A-12V-9.0KW-10T-3M, 65.26201-7067A forms the usable OE and cross-reference group for this product, while DAEWOO generator set is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For product managers confirming electrical ratings, the starter being replaced should agree with the approved drive-end, side and rear views. Confirm the 10T pinion and module 3, then keep any different flange or terminal layout outside the current priced item.

65.26201-7067A-12V-9.0KW-10T-3M Wholesale Supply for Distributors and Importers

For fleet-parts buyers setting packaging requirements, distributor supply for 65.26201-7067A-12V-9.0KW-10T-3M can include neutral packaging, customer-brand review and order-specific labels. Current commercial guidance is 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For private-label buyers planning replenishment, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

65.26201-7067A-12V-9.0KW-10T-3M Starter Motor Buyer FAQ

How can an importer validate 65.26201-7067A-12V-9.0KW-10T-3M technical claim evidence for warehouse identification?

For sourcing managers planning a repeat order, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the DAEWOO generator set equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

Which detail separates 9.0kW output on DAEWOO generator set before a purchase order is released?

For application specialists checking repeat-order specifications, the 9.0kW rating belongs to the 65.26201-7067A-12V-9.0KW-10T-3M configuration used for DAEWOO generator set. Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

Which specification deserves priority for 10-tooth pinion identification for a first trade order?

For replacement-parts sellers matching the unit taken from service, count all 10 teeth on the 65.26201-7067A-12V-9.0KW-10T-3M pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

How can an importer validate 65.26201-7067A-12V-9.0KW-10T-3M label and suffix when checking a replacement proposal?

For service-parts networks reviewing drive-end geometry, photograph the complete old-unit label for 65.26201-7067A-12V-9.0KW-10T-3M, including every prefix, suffix and separator. Shortened numbers can group starters that differ in voltage, output, drive or housing. Pair the label with a front and rear view, then retain the full marking in the RFQ and purchase order so later receiving checks use the same identity.

What evidence best identifies mounting-hole pattern during an application review?

For importers comparing nearby starter versions, A complete mounting-hole callout is not stated for 65.26201-7067A-12V-9.0KW-10T-3M. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

What should receiving teams compare on 65.26201-7067A-12V-9.0KW-10T-3M side-profile photograph when preparing a product enquiry?

For product managers separating similar housings, the side profile of 65.26201-7067A-12V-9.0KW-10T-3M shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use 48±1 mm where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

Which check should lead 48±1 mm for repeatable sourcing?

For maintenance suppliers evaluating a direct replacement, use 48±1 mm when comparing 65.26201-7067A-12V-9.0KW-10T-3M. Measure from the drawing's indicated faces and keep pinion rest position separate from overall body length. These axial values influence how the drive sits and engages, so the set should agree with the removed starter before a fleet or distributor quantity is released.

Which specification deserves priority for module 3 before accepting a substitute?

For equipment-parts dealers comparing the flange and terminals, module 3 is part of the gear geometry for 65.26201-7067A-12V-9.0KW-10T-3M. Confirm it together with the 10-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

Request a Wholesale Quote for 65.26201-7067A-12V-9.0KW-10T-3M Construction Equipment Starter Motor

For purchasing teams preparing distributor pricing, prepare the RFQ with 65.26201-7067A-12V-9.0KW-10T-3M, 65.26201-7067A, the complete application, quantity, target delivery and packaging requirements. We will respond with the defined 12V 9.0kW 10T starter motor line rather than a generic substitute.