M008T77072 Isuzu Starter Motor 12V 2.7kW 11T

M008T77072 Heavy-Duty Truck Starter Motor for ISUZU 4JB1 (DH55)

For regional parts suppliers reviewing customer demand, M008T77072 is an aftermarket heavy-duty truck starter motor for ISUZU 4JB1 (DH55). Its 12V system, 2.7kW output and 11T pinion give commercial-vehicle distributors, fleet-parts suppliers and importers a clear product definition for OE-reference replacement and repeat-order sourcing.

For aftermarket wholesalers building a new starter range, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

M008T77072 Starter Motor Specifications and Technical Drawing

For product managers evaluating a direct replacement, this reference group can cover nearby starter versions. Keep M008T77072, 12V, 2.7kW and 11T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For maintenance suppliers comparing the flange and terminals, the source-faithful technical drawing records the available mounting information for M008T77072, including 2×Ø14, Ø113, Ø95, 10.35 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

M008T77072 Aftermarket Replacement and Application

For fitment reviewers checking repeat-order specifications, M008T77072, M008T77075, 897349-4021 forms the usable OE and cross-reference group for this product, while ISUZU 4JB1 (DH55) is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For application specialists matching the starter removed from the machine, A direct replacement decision should combine the OE group with physical comparison. Check the mounting face, 11T drive and cable-stud direction, and ask for a separate review when one of those features differs.

M008T77072 Wholesale Supply for Distributors and Importers

For sales teams preparing distributor pricing, importers planning M008T77072 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For warehouse planners opening a first commercial order, the order can specify testing scope, sampling level, label content and packing details. Reference-label, drive-end and terminal-protection photos may also be requested before shipment for the agreed product version.

M008T77072 Starter Motor Buyer FAQ

How can a buyer screen 2×Ø14, Ø113, Ø95 and 10.35 mm for repeatable sourcing?

For technical buyers matching the existing starter, use the supplied technical drawing to compare 2×Ø14, Ø113, Ø95 and 10.35 mm. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

What should purchasing verify first for 12V and 2.7kW for repeatable sourcing?

For engine-parts specialists reviewing drive-end geometry, M008T77072 is defined as 12V and 2.7kW. Confirm the machine electrical system and the old starter rating together, because voltage determines system compatibility while rated power influences available cranking effort. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

Which check should lead flange clocking before stock is assigned?

For fleet-parts buyers comparing nearby starter versions, no separate angular callout is stated for M008T77072. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

What should purchasing verify first for M008T77072 solenoid and cable routing when the original unit in hand is available?

For technical sales teams preparing a technical RFQ, use the side and rear photographs of M008T77072 to check solenoid position, battery-stud direction and start-terminal access in ISUZU 4JB1 (DH55). Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What evidence best identifies M008T77072 cartons and units when checking a replacement proposal?

For sourcing managers defining label requirements, sample cartons from different positions in the shipment and compare the M008T77072 labels, 12V marking, 11-tooth pinion, flange shape and terminal protection with the buying description. Photograph any mixed marking, damaged terminal or different drive end before the unit is fitted, and isolate those pieces so the rest of the lot can be assessed consistently.

How can a buyer screen 11T and module 3 during fitment review?

For application specialists comparing the flange and terminals, the supplied drive uses 11 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth ahead of the order. The 3 module is part of the gear definition, so another pitch must not be combined on the one item entry. This check protects the ring gear from an incorrect mesh.

Which detail separates M008T77072 carton identification when several versions look alike?

For sales teams planning mixed-model inventory, ask that unit and carton labels repeat the agreed reference, 12V, 2.7kW and 11T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

How can an importer validate M008T77072 replenishment before an installation slot is booked?

For warehouse planners updating a customer item master, keep M008T77072, 12V, 2.7kW, 11T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different original unit in hand appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

Request a Wholesale Quote for M008T77072 Heavy-Duty Truck Starter Motor

For importers confirming an incoming batch, request pricing for M008T77072 by sharing the application, quantity, delivery country and any neutral or private-label packaging needs. Clear label, drive-end, flange and terminal photos help confirm the exact starter before the offer is issued.