119131-77011 Isuzu Starter Motor 24V 3.5kW 9T

119131-77011 Heavy-Duty Truck Starter Motor for ISUZU 4BC2

For fleet-parts buyers reviewing customer demand, Elecdura offers 119131-77011 as an aftermarket heavy-duty truck starter motor for ISUZU 4BC2. The 24V, 3.5kW and 9T configuration is intended for professional replacement sourcing by commercial-vehicle distributors, fleet-parts suppliers and importers.

For private-label buyers building a new starter range, accurate version control reduces avoidable returns and mixed stock. The gallery, technical drawing where available, and order information below give commercial and technical teams a shared basis for the RFQ.

119131-77011 Starter Motor Specifications and Technical Drawing

For technical sales teams checking version-defining data, this reference group can cover nearby starter versions. Keep 119131-77011, 24V, 3.5kW and 9T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For fitment reviewers comparing the flange and terminals, the source-faithful technical drawing records the available mounting information for 119131-77011, including Ø95, 39.5 mm, 20.5 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

119131-77011 Aftermarket Replacement and Application

For purchasing teams separating similar housings, send 119131-77011, S24-03C, S24-03A, S24-03B, S24-13A, the full ISUZU 4BC2 description and photos of the starter being removed. These details allow the quotation to stay product-specific when related numbers appear on more than one housing version.

For distributors evaluating a direct replacement, before a purchase order is released, compare the removed starter's mounting face, 9T drive and terminal direction with the approved gallery. Module 3 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

119131-77011 Wholesale Supply for Distributors and Importers

For aftermarket product managers preparing distributor pricing, Elecdura supplies 119131-77011 for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For engine-parts specialists opening a first stocking order, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

119131-77011 Starter Motor Buyer FAQ

How can a buyer screen 119131-77011 solenoid and cable routing for a first commercial order?

For importers evaluating a direct replacement, use the side and rear photographs of 119131-77011 to check solenoid position, battery-stud direction and start-terminal access in ISUZU 4BC2. Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

Which comparison prevents a mismatch for mounting-hole pattern before an installation slot is booked?

For product managers reviewing drive-end geometry, A complete mounting-hole callout is not stated for 119131-77011. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

What must be matched before quoting 24V system compatibility for warehouse identification?

For maintenance suppliers comparing nearby starter versions, 119131-77011 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement ahead of the order. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

What evidence best identifies 119131-77011 locating face when the old starter is available?

For equipment-parts dealers preparing a technical RFQ, the 119131-77011 flange should sit flat against the ISUZU 4BC2 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

How can a buyer screen 24V and 3.5kW before accepting a substitute?

For purchasing teams checking version-defining data, 119131-77011 is defined as 24V and 3.5kW. Confirm the machine electrical system and the old starter rating together, because voltage defines the electrical platform while output affects cranking performance. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

What must be matched before quoting 119131-77011 among Isuzu versions before stock is assigned?

For distributors confirming electrical ratings, 119131-77011 should remain separate from another Isuzu starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 3.5kW and 9T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

What must be matched before quoting ISUZU 4BC2 previously replaced starter when checking a replacement proposal?

For technical buyers reviewing a replacement proposal, ask whether the starter removed from ISUZU 4BC2 is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with 119131-77011, 24V, 3.5kW and 9T before turning that history into a bulk stocking decision.

Which specification deserves priority for 9T and module 3 when confirming the RFQ entry?

For engine-parts specialists confirming the stated application, the supplied drive uses 9 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth prior to purchase. The 3 module is part of the gear definition, so another pitch must not be combined on the one stock line. This check protects the ring gear from an incorrect mesh.

Request a Wholesale Quote for 119131-77011 Heavy-Duty Truck Starter Motor

For regional parts suppliers confirming an incoming batch, discuss a 119131-77011 supply program with Elecdura by sending the OE reference, application, annual or initial quantity, destination and branding needs. The reply will identify the offered product version and agreed commercial options.