M009T82071 Isuzu Starter Motor 24V 8.5kW 11T

M009T82071 Construction Equipment Starter Motor for ISUZU 6WG1 (SANY 485)

For distributors confirming commercial terms, M009T82071 gives construction-equipment parts distributors, importers and fleet suppliers a defined aftermarket starter motor for ISUZU 6WG1 (SANY 485). The supplied version combines 24V, 8.5kW and 11T for OE-reference matching, wholesale quotation and repeat purchasing.

For aftermarket product managers opening a first distributor purchase, this page is designed to support a distributor decision: identify the correct replacement, confirm the key specification, define packaging and inspection needs, and request one consistent quotation for the required quantity.

M009T82071 Starter Motor Specifications and Technical Drawing

For replacement-parts sellers checking application evidence, the key version difference is the mounting and housing clocking. Compare 100° and 3×Ø15.5 with the old starter so the pinion alignment and cable access remain correct.

For service-parts networks preparing an OE-based quote, the source-faithful technical drawing records the available mounting information for M009T82071, including 3×Ø15.5, Ø122, 54±1 mm, 100°; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

M009T82071 Aftermarket Replacement and Application

For engine-parts specialists preparing a technical RFQ, M009T82071, 1811004215 forms the usable OE and cross-reference group for this product, while ISUZU 6WG1 (SANY 485) is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For fleet-parts buyers checking version-defining data, use the gallery to compare the flange, 11T pinion and rear connections before approving the order. Keep module 3.5 with the tooth count. A changed mounting or terminal feature should be quoted as another starter version.

M009T82071 Wholesale Supply for Distributors and Importers

For aftermarket wholesalers planning a repeat order, importers planning M009T82071 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For sourcing managers planning mixed-model inventory, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

M009T82071 Starter Motor Buyer FAQ

What should receiving teams compare on M009T82071 stock identification before an installation slot is booked?

For private-label buyers preparing a volume quote, label the storage location with M009T82071, 24V, 8.5kW and 11T, and keep a verified drive-end and rear-view image with the item master. Do not combine close-looking Isuzu units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

How should a workshop distinguish M009T82071 carton identification during fitment review?

For purchasing teams planning a repeat order, ask that unit and carton labels repeat the agreed reference, 24V, 8.5kW and 11T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

Which check should lead module 3.5 during fitment review?

For distributors checking repeat-order specifications, module 3.5 is part of the gear geometry for M009T82071. Confirm it together with the 11-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

Which specification deserves priority for M009T82071 terminal access for a first commercial order?

For technical buyers confirming the stated application, compare the rear housing and terminal direction in the approved product views for M009T82071. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

What should receiving teams compare on ISUZU 6WG1 (SANY 485) cranking condition for a documented fitment decision?

For engine-parts specialists checking application evidence, before replacing the starter on ISUZU 6WG1 (SANY 485), test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 8.5kW starter and make a product query easier to resolve.

How should a workshop distinguish 24V system compatibility during an application review?

For fleet-parts buyers preparing an OE-based quote, M009T82071 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement during pre-order review. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

How can a buyer screen 100° when confirming the priced item?

For technical sales teams separating similar housings, compare 100° with the old flange in the same orientation. Clocking affects body clearance, solenoid position and terminal access even when diameter and hole count match. Use the printed angle or spacing callout rather than estimating from a rotated product photograph, and keep the same datum visible in both images.

What should receiving teams compare on M009T82071 ring-gear engagement when several versions look alike?

For fitment reviewers matching the starter being replaced, review the 11T pinion, module 3.5, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

Request a Wholesale Quote for M009T82071 Construction Equipment Starter Motor

For wholesale program managers updating a customer item master, send M009T82071, 1811004215, the ISUZU 6WG1 (SANY 485) application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 8.5kW, 11T version and prepare a product-specific wholesale quotation.