M008T81571 Isuzu Starter Motor 24V 3.2kW 11T

M008T81571 Construction Equipment Starter Motor for ISUZU 4LE2 (Kobelco 75)

For sales teams reviewing customer demand, this aftermarket construction equipment starter motor is specified for ISUZU 4LE2 (Kobelco 75) with 24V, 3.2kW and 11T. The page keeps the replacement identity, technical definition and distributor purchase information in one place.

For warehouse planners building a new starter range, this page is designed to support a distributor decision: identify the correct replacement, confirm the key specification, define packaging and inspection needs, and request one consistent quotation for the required quantity.

M008T81571 Starter Motor Specifications and Technical Drawing

For distributors checking version-defining data, the product identity combines M008T81571, ISUZU 4LE2 (Kobelco 75), 24V, 3.2kW and 11T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For technical buyers comparing the flange and terminals, the source-faithful technical drawing records the available mounting information for M008T81571, including 2×Ø14, 21.5 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

M008T81571 Aftermarket Replacement and Application

For importers separating similar housings, the replacement search starts with M008T81571, 898072-3151 and the ISUZU 4LE2 (Kobelco 75) application. For mixed fleets or previously repaired machines, add clear old-unit photos so a substituted starter does not become the only fitment evidence.

For product managers matching the starter removed from the machine, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

M008T81571 Wholesale Supply for Distributors and Importers

For fleet-parts buyers preparing distributor pricing, M008T81571 is available for professional aftermarket supply to construction-equipment parts distributors, importers and fleet suppliers. Ask for wholesale pricing with quantity, destination and packaging requirements; standard terms are 20 pcs MOQ, 7–15 days after confirmation and 18 months warranty.

For private-label buyers opening a first bulk order, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

M008T81571 Starter Motor Buyer FAQ

How can a buyer screen 24V system compatibility when preparing a fitment check?

For fitment reviewers matching the original unit in hand, M008T81571 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before ordering. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

Which specification deserves priority for 11-tooth pinion identification when preparing a fitment request?

For application specialists reviewing drive-end geometry, count all 11 teeth on the M008T81571 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

What must be matched before quoting M008T81571 stock identification during fitment review?

For sales teams opening a first bulk order, label the storage location with M008T81571, 24V, 3.2kW and 11T, and keep a verified drive-end and rear-view image with the item master. Do not combine close-looking Isuzu units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

How should a distributor confirm locating diameter before stock is assigned?

For service-parts networks preparing a technical RFQ, no locating diameter is published for M008T81571. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

How can a buyer screen M008T81571 carton identification when several versions look alike?

For importers preparing a volume quote, ask that unit and carton labels repeat the agreed reference, 24V, 3.2kW and 11T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

How can an importer validate M008T81571, 898072-3151 during an application review?

For product managers comparing the flange and terminals, M008T81571, 898072-3151 should be treated as one inquiry group only after the existing assembly is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate quote position instead of assuming that the shared number guarantees interchangeability.

How can an importer validate ISUZU 4LE2 (Kobelco 75) production changes when the old starter is available?

For maintenance suppliers reviewing a replacement proposal, ISUZU 4LE2 (Kobelco 75) may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match M008T81571, 24V, 3.2kW and 11T to the starter removed from the machine. A changed suffix, flange or terminal layout should open a separate review for that machine.

How should a distributor confirm flange clocking before stock is assigned?

For equipment-parts dealers confirming the stated application, no separate angular callout is stated for M008T81571. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

Request a Wholesale Quote for M008T81571 Construction Equipment Starter Motor

For purchasing teams confirming an incoming batch, prepare the RFQ with M008T81571, 898072-3151, the complete application, quantity, target delivery and packaging requirements. We will respond with the defined 24V 3.2kW 11T starter motor line rather than a generic substitute.