10611252636000 Changfa Starter Motor 24V 4.5kW 12T

10611252636000 Agricultural Machinery Starter Motor for CHANGFA ZS1110G, ZS1115, CFZS1130, CF36

For aftermarket product managers setting packaging requirements, 10611252636000 is an aftermarket agricultural machinery starter motor for CHANGFA ZS1110G, ZS1115, CFZS1130, CF36. Its 24V system, 4.5kW output and 12T pinion give agricultural-machinery distributors, importers and engine-parts wholesalers a clear product definition for OE-reference replacement and repeat-order sourcing.

For engine-parts specialists planning replenishment, the commercial value is a clearly identified starter rather than a generic visual match. Buyers can use the OE group, application, product images and technical data together, while neutral packaging and private-label review can be discussed for qualified bulk orders.

10611252636000 Starter Motor Specifications and Technical Drawing

For service-parts networks reviewing a replacement proposal, the key version difference is the mounting and housing clocking. Compare 35° and 2×Ø13 with the removed unit so the pinion alignment and cable access remain correct.

For importers confirming the stated application, the source-faithful technical drawing records the available mounting information for 10611252636000, including 2×Ø13, Ø82, Ø120, 66.5 mm, 39±1 mm, 22±1 mm, 35°; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

10611252636000 Aftermarket Replacement and Application

For fleet-parts buyers reviewing drive-end geometry, 10611252636000 forms the usable OE and cross-reference group for this product, while CHANGFA ZS1110G, ZS1115, CFZS1130, CF36 is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For technical sales teams comparing nearby starter versions, before a purchase order is released, compare the removed starter's mounting face, 12T drive and terminal direction with the approved gallery. Module 3 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

10611252636000 Wholesale Supply for Distributors and Importers

For sourcing managers requesting production pricing, Elecdura supplies 10611252636000 for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For wholesale program managers defining label requirements, available quality support includes armature, solenoid, no-load and load testing. Buyers may define sampling, report format, reference labels, terminal protection and carton marks before production so the shipment can be checked against the approved order specification.

10611252636000 Starter Motor Buyer FAQ

Which detail separates 10611252636000 replenishment before a purchase order is released?

For purchasing teams opening a first B2B purchase, keep 10611252636000, 24V, 4.5kW, 12T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different existing starter appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

What must be matched before quoting 24V system compatibility before stock is assigned?

For distributors preparing a technical RFQ, 10611252636000 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement ahead of the order. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

What evidence best identifies 10611252636000 locating face for repeatable sourcing?

For technical buyers evaluating a direct replacement, the 10611252636000 flange should sit flat against the CHANGFA ZS1110G, ZS1115, CFZS1130, CF36 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

How should a distributor confirm 66.5 mm, 39±1 mm and 22±1 mm when preparing a fitment request?

For engine-parts specialists comparing the flange and terminals, use 66.5 mm, 39±1 mm and 22±1 mm when comparing 10611252636000. Measure from the drawing's indicated faces and keep pinion rest position separate from overall body length. These axial values influence how the drive sits and engages, so the set should agree with the removed starter before a fleet or distributor quantity is released.

What must be matched before quoting 10611252636000 among Changfa versions for warehouse identification?

For fleet-parts buyers reviewing a replacement proposal, 10611252636000 should remain separate from another Changfa starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 4.5kW and 12T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

Which specification deserves priority for 10611252636000 stock identification before comparing delivery options?

For aftermarket wholesalers updating a customer item master, label the storage location with 10611252636000, 24V, 4.5kW and 12T, and keep a verified drive-end and rear-view image with the item master. Do not combine comparable-looking Changfa units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

Which specification deserves priority for 10611252636000 order testing when confirming the quotation line?

For sourcing managers preparing a volume quote, Elecdura can discuss armature, solenoid, no-load and load testing for 10611252636000. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 4.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

Which detail separates 10611252636000 three-view gallery when checking a replacement proposal?

For application specialists confirming electrical ratings, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to 10611252636000; they should be reviewed together with the 12T drive and CHANGFA ZS1110G, ZS1115, CFZS1130, CF36 application. Request an additional close-up when the customer's unit hides a deciding feature.

Request a Wholesale Quote for 10611252636000 Agricultural Machinery Starter Motor

For sales teams confirming commercial terms, send 10611252636000, the CHANGFA ZS1110G, ZS1115, CFZS1130, CF36 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 4.5kW, 12T version and prepare a product-specific wholesale quotation.