1113274 Massey Ferguson MF200 12V 2.9kW Starter Motor Bulk Supply

1113274 Massey Ferguson MF200 Starter Motor Wholesale Procurement

This 1113274 product line for Massey Ferguson MF200 is aimed at B2B buyers handling starter demand. The 12V, 2.9kW, 10T specification helps separate this configuration from related units when several similar starters pass through the same parts counter.

Export wholesaler teams handling consolidated shipment should send 1113274, the Massey Ferguson MF200 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address consistent rebuild-bench identification, sample-to-bulk scheduling and the correct physical configuration in one useful commercial offer.

1113274 Starter Motor Wholesale Fitment Checks

Start the physical comparison with 10T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. Use a straight view of the mounting face and a side view parallel to the shaft so perspective does not hide the flange-to-pinion relationship. A close body shape, paint color or solenoid size is not enough to establish interchangeability.

The 2.9kW output and 10T drive belong together with 12V. Record all three rather than quoting power alone, and include a terminal-side photograph so the B+ cable, control wire and nearby clearances can be reviewed before shipment.

1113274 Starter Motor OE Reference Control for B2B Orders

Purchasing records should preserve 1113274 with the Massey Ferguson MF200 application. Alternate numbers can support a search, but they should not replace the main line until the complete physical and electrical specification agrees; uncertain alternatives are clearer when quoted as separate items.

For consolidated shipment, keep 1113274, Massey Ferguson MF200, 12V, 2.9kW and 10T on one purchasing record. At goods-in, review branch stock-location control before releasing the lot. This gives the export wholesaler a documented basis for consistent rebuild-bench identification when the next order is raised.

1113274 Starter Motor Wholesale Terms and Supply Support

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a harvest support depot should keep 1113274 tied to Massey Ferguson MF200. For consolidated shipment, the export wholesaler can use an engine-rebuild allocation, record the removed-unit dimensions and review branch stock-location control at goods-in. This supports consistent rebuild-bench identification while keeping sample-to-bulk scheduling visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 1113274, Massey Ferguson MF200 and the confirmed physical configuration on the quotation.

1113274 Massey Ferguson MF200 Starter Motor FAQs

How can an export wholesaler source 1113274 for consolidated shipment?

Export wholesaler teams should tie 1113274 to Massey Ferguson MF200, 12V, 2.9kW, 10T and the removed-unit photographs before requesting price. For consolidated shipment, state quantity, destination and delivery timing, then review branch stock-location control. Ask Elecdura to address sample-to-bulk scheduling and consistent rebuild-bench identification in the same quotation.

For sample-to-bulk scheduling, how should branches keep 1113274 separate from similar starters?

Use the full reference, Massey Ferguson MF200 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Use 1113274 when arranging sample-to-bulk scheduling.

Branch stock-location control check: Can 1113274 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. This supports consistent rebuild-bench identification for 1113274.

During consolidated shipment, which physical details matter most when comparing 1113274?

Compare 10T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Keep 1113274 traceable through consolidated shipment.

Sample-to-bulk scheduling question: What should receiving staff inspect on the 1113274 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Massey Ferguson MF200 inventory. Link 1113274 photographs to the branch stock-location control record.

To support consistent rebuild-bench identification, what lead-time details should be stated for the 1113274 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the 1113274 result into sample-to-bulk scheduling.

For consolidated shipment handled by an export wholesaler, how should 12V be confirmed for 1113274?

Check the machine electrical system, old-starter label and service record before ordering. Keep 2.9kW, 10T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain 1113274 for consistent rebuild-bench identification and receiving review.

Sample-to-bulk scheduling question: How can workshops photograph 1113274 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Retain the 1113274 result for consolidated shipment.

Request 1113274 Starter Motor Wholesale Pricing

Email info@elecdurauto.com with 1113274, Massey Ferguson MF200 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.9kW 10T offer, availability, packing, lead time and freight options.