CHANCHAI 4102 24V 4.5kW 9T Changchai Starter Motor

CHANCHAI 4102 24V 4.5kW 9T Agricultural Machinery Starter Motor for CHANCHAI 4102, 4105

For sourcing managers defining label requirements, CHANCHAI 4102 24V 4.5kW 9T gives agricultural-machinery distributors, importers and engine-parts wholesalers a defined aftermarket starter motor for CHANCHAI 4102, 4105. The supplied version combines 24V, 4.5kW and 9T for OE-reference matching, wholesale quotation and repeat purchasing.

For wholesale program managers confirming commercial terms, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

CHANCHAI 4102 24V 4.5kW 9T Starter Motor Specifications and Technical Drawing

For equipment-parts dealers matching the unit taken from service, this starter should be identified by the complete mounting set, including 2×Ø13, Ø95, Ø120 and 19±1 mm. A single matching dimension does not establish a direct replacement.

For purchasing teams reviewing drive-end geometry, the source-faithful technical drawing records the available mounting information for CHANCHAI 4102 24V 4.5kW 9T, including 2×Ø13, Ø95, Ø120, 19±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

CHANCHAI 4102 24V 4.5kW 9T Aftermarket Replacement and Application

For replacement-parts sellers reviewing a replacement proposal, CHANCHAI 4102 24V 4.5kW 9T forms the usable OE and cross-reference group for this product, while CHANCHAI 4102, 4105 is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For service-parts networks confirming the stated application, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

CHANCHAI 4102 24V 4.5kW 9T Wholesale Supply for Distributors and Importers

For importers reviewing customer demand, Elecdura supplies CHANCHAI 4102 24V 4.5kW 9T for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For inventory buyers planning a repeat order, batch consistency should be controlled through the agreed reference, electrical rating, pinion, packaging and inspection points. Elecdura can discuss test documentation and pre-shipment photos that match the needs of the distributor or importer.

CHANCHAI 4102 24V 4.5kW 9T Starter Motor Buyer FAQ

What must be matched before quoting 24V system compatibility before accepting a substitute?

For fleet-parts buyers confirming the stated application, CHANCHAI 4102 24V 4.5kW 9T is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before ordering. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

How can an importer validate 9-tooth pinion identification before accepting a substitute?

For technical sales teams checking application evidence, count all 9 teeth on the CHANCHAI 4102 24V 4.5kW 9T pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

Which specification deserves priority for 9T and module 3 before stock is assigned?

For fitment reviewers confirming electrical ratings, the supplied drive uses 9 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth at inquiry stage. The 3 module is part of the gear definition, so another pitch must not be combined on the one item entry. This check protects the ring gear from an incorrect mesh.

Which specification deserves priority for CHANCHAI 4102 24V 4.5kW 9T stock identification before stock is assigned?

For wholesale program managers setting packaging requirements, label the storage location with CHANCHAI 4102 24V 4.5kW 9T, 24V, 4.5kW and 9T, and keep a verified drive-end and rear-view image with the item master. Do not combine easily confused Changchai units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

What evidence best identifies CHANCHAI 4102, 4105 for a documented fitment decision?

For replacement-parts sellers matching the starter being replaced, CHANCHAI 4102, 4105 identifies the intended agricultural or industrial machine family, but it should not be used by itself. Pair the application with CHANCHAI 4102 24V 4.5kW 9T, the 24V electrical system and the 9-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration ahead of commercial and delivery confirmation.

How can a buyer screen CHANCHAI 4102 24V 4.5kW 9T drawing dimensions before stock is assigned?

For service-parts networks reviewing drive-end geometry, read the CHANCHAI 4102 24V 4.5kW 9T drawing as a comparison aid, not as permission to ignore the existing starter. Check every visible diameter, hole callout, length and angle that affects seating or engagement, then confirm the terminal view from the product photos. The drawing is schematic and not to scale, so decisions must follow the printed values rather than a visual estimate from the image.

How can an importer validate module 3 for a first stocking order?

For importers comparing nearby starter versions, module 3 is part of the gear geometry for CHANCHAI 4102 24V 4.5kW 9T. Confirm it together with the 9-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

What should purchasing verify first for CHANCHAI 4102, 4105 production changes before a purchase order is released?

For product managers separating similar housings, CHANCHAI 4102, 4105 may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match CHANCHAI 4102 24V 4.5kW 9T, 24V, 4.5kW and 9T to the starter removed from the machine. A changed suffix, flange or terminal layout should open a separate review for that machine.

Request a Wholesale Quote for CHANCHAI 4102 24V 4.5kW 9T Agricultural Machinery Starter Motor

For fleet-parts buyers setting packaging requirements, ask for a quote on CHANCHAI 4102 24V 4.5kW 9T with the full CHANCHAI 4102, 4105 record, quantity and packaging plan. We will verify the requested 24V, 4.5kW and 9T configuration and return the relevant wholesale terms.