2873K404 Massey Ferguson/Perkins 12V 3.0kW Starter Motor Wholesale Supply

2873K404 Massey Ferguson/Perkins Starter Motor Wholesale Overview

Elecdura supplies 2873K404 for Massey Ferguson/Perkins to parts distributors, rebuilders and fleet-service buyers. This Marelli-type replacement is specified as 12V, 3.0kW and 10T; keeping those facts beside the application makes sample comparison and repeat purchasing more consistent.

Rebuild workshop buyer teams handling consolidated shipment should send 2873K404, the Massey Ferguson/Perkins record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address a controlled first sample, planned warehouse release and the correct physical configuration in one useful commercial offer.

2873K404 Starter Motor Wholesale Fitment Checks

Start the physical comparison with 10T pinion and 40.5mm reference, mounting face, drive reach, solenoid position and terminal orientation. Use a straight view of the mounting face and a side view parallel to the shaft so perspective does not hide the flange-to-pinion relationship. A close body shape, paint color or solenoid size is not enough to establish interchangeability.

The 3.0kW output and 10T drive belong together with 12V. Record all three rather than quoting power alone, and include a terminal-side photograph so the B+ cable, control wire and nearby clearances can be reviewed before shipment.

2873K404 Starter Motor Reference Management for B2B Purchasing

On cartons, purchase orders and customer quotations, retain the complete 2873K404 string. If additional references are supplied, show each one in full rather than compressing them into a broad interchange statement; the application and physical unit still require a complete match.

For consolidated shipment, keep 2873K404, Massey Ferguson/Perkins, 12V, 3.0kW and 10T on one purchasing record. At goods-in, review label and reference traceability before releasing the lot. This gives the rebuild workshop buyer a documented basis for a controlled first sample when the next order is raised.

2873K404 Starter Motor Distributor Packing and Stock Planning

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a farm-fleet maintenance store should keep 2873K404 tied to Massey Ferguson/Perkins. For consolidated shipment, the rebuild workshop buyer can use a project-site reserve, capture the terminal-side view and review label and reference traceability at goods-in. This supports a controlled first sample while keeping planned warehouse release visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 2873K404 application and specification shown above for their own product comparison.

2873K404 Massey Ferguson/Perkins Starter Motor FAQs

How can a rebuild workshop buyer source 2873K404 for consolidated shipment?

Rebuild workshop buyer teams should tie 2873K404 to Massey Ferguson/Perkins, 12V, 3.0kW, 10T and the removed-unit photographs before requesting price. For consolidated shipment, state quantity, destination and delivery timing, then review label and reference traceability. Ask Elecdura to address planned warehouse release and a controlled first sample in the same quotation.

For consolidated shipment handled by a rebuild workshop buyer, which physical details matter most when comparing 2873K404?

Compare 10T pinion and 40.5mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Keep 2873K404 traceable through consolidated shipment.

A controlled first sample: Can 2873K404 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Link 2873K404 photographs to the label and reference traceability record.

Planned warehouse release question: What information helps review the 2873K404 warranty enquiry?

Provide the invoice or lot reference, installation date, Massey Ferguson/Perkins details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Carry the 2873K404 result into planned warehouse release.

Rebuild workshop buyer receiving review: How can workshops photograph 2873K404 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Retain 2873K404 for a controlled first sample and receiving review.

For planned warehouse release, why should Massey Ferguson/Perkins stay on the 2873K404 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Massey Ferguson/Perkins, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Retain the 2873K404 result for consolidated shipment.

For consolidated shipment handled by a rebuild workshop buyer, when is a sample order useful for 2873K404?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. File 2873K404 with the label and reference traceability check.

Planned warehouse release question: What should be checked before installing the 2873K404 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Use 2873K404 when arranging planned warehouse release.

Request 2873K404 Starter Motor Wholesale Pricing

Email info@elecdurauto.com with 2873K404, Massey Ferguson/Perkins details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 3.0kW 10T offer, availability, packing, lead time and freight options.