Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
26148
26148
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
26148
MF244; 12V, 2.1kW, 10T
Confirm 10T pinion, mounting face, drive reach, solenoid position and terminal orientation, 12V, 2.1kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
MF244 parts buyers can quote 26148 in the M45 replacement configuration with 12V, 2.1kW and 10T. The combination matters because it helps MF244 service buyers control a 10T configuration before it enters mixed-reference warehouse stock; it also gives sales and warehouse teams one consistent description for samples, bulk orders and reorders.
Fleet workshop teams handling consolidated shipment should send 26148, the MF244 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, urgent dispatch options and the correct physical configuration in one useful commercial offer.
| Primary order identity | 26148 |
| Target application | MF244 |
| Starter design | M45 replacement |
| System voltage | 12V |
| Rated output | 2.1kW |
| Pinion identification | 10T / confirm dimensions from the removed unit |
| OE / reference group | 26148 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The fastest useful fit check combines a square drive-end view with a side profile. Use both images to compare 10T pinion, mounting face, drive reach, solenoid position and terminal orientation, then check the locating shoulder and pinion position with the old starter and proposed sample in the same orientation. This creates a reusable reference for later branch orders.
Before ordering, the buyer should verify 12V, 2.1kW output, 10T pinion and terminal arrangement. Keeping these points together helps warehouse and sales teams avoid switching a similar-looking unit into the MF244 order.
On cartons, purchase orders and customer quotations, retain the complete 26148 string. If additional references are supplied, show each one in full rather than compressing them into a broad interchange statement; the application and physical unit still require a complete match.
For consolidated shipment, keep 26148, MF244, 12V, 2.1kW and 10T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the fleet workshop a documented basis for shorter machine downtime when the next order is raised.
Wholesale buyers may combine an initial verification order with a forward replenishment plan, provided each reference remains clearly separated. Normal terms are MOQ 20 pieces, 7–15 days after confirmation and an 18-month warranty; packing and freight are quoted for the stated destination.
Demand from a seasonal farm workshop should keep 26148 tied to MF244. For consolidated shipment, the fleet workshop can use a fast-moving counter stock, hold one incoming unit for comparison and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping urgent dispatch options visible.
Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 26148, MF244 and the confirmed physical configuration on the quotation.
Fleet workshop teams should tie 26148 to MF244, 12V, 2.1kW, 10T and the removed-unit photographs before requesting price. For consolidated shipment, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address urgent dispatch options and shorter machine downtime in the same quotation.
Send the complete 26148 reference, MF244 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.1kW 10T unit, packing, lead time and freight in one focused offer. Carry the 26148 result into urgent dispatch options.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal MF244 inventory. Retain 26148 for shorter machine downtime and receiving review.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Retain the 26148 result for consolidated shipment.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. File 26148 with the flange and locating-register fit check.
Provide the invoice or lot reference, installation date, MF244 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Use 26148 when arranging urgent dispatch options.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. This supports shorter machine downtime for 26148.
Use the full reference, MF244 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Keep 26148 traceable through consolidated shipment.
Email info@elecdurauto.com with 26148, MF244 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.1kW 10T offer, availability, packing, lead time and freight options.
