S1094 Daewoo DH370 Starter Motor Wholesale Supply

S1094 Starter Motor Fleet Replacement Supply for Daewoo DH370 excavator and Tata Daewoo Novus

S1094 supports Daewoo DH370 excavator and Tata Daewoo Novus sourcing where buyers need a defined electrical and drive-end match. Its 24V, 7.0kW, 11T CW specification must remain linked to the 24V 7.0kW 11T module-3 drive shared by the cataloged DH370 and Novus records; a visually related unit may belong on a different RFQ line.

Before comparing S1094 prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.

S1094 Starter Motor Technical Data for Fleet Parts Buyers

The S1094 dimensional review starts at the mounting face: verify catalog-drawn three-hole mounting face, Ø148 mounting-hole circle and Ø90 locating diameter. Then compare the 47 mm distance to drive gear. The drawing is not a scale template, so record actual measurements and review terminal orientation separately.

For S1094, electrical and mechanical identity must agree: 24V, 7.0kW, 11T, module 3 and CW. Check the terminals and solenoid position before installation. If the old unit differs at one of these points, keep it outside the defined stock line.

S1094 Starter Motor Cross-Reference Review for Fleet Buyers

The S1094 cross-reference group includes S1094, 116626, 30051600075A, 30051600075B, 65262017058A, 65262017062C, 65262017067. These numbers improve search coverage across fleets and supplier systems, but they do not replace a check of 24V, 7.0kW, 11T, CW, mounting geometry and terminals.

If a mixed S1094 enquiry contains different pinions, drive positions or connector layouts, list each complete reference and photograph separately. Elecdura can then return distinct offers instead of placing unlike starters under one broad reference family.

S1094 Starter Motor Fleet Supply and Replenishment Support

Wholesale planning for S1094 can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Stock planning should reflect the supported Daewoo DH370 excavator and Tata Daewoo Novus population, recent consumption and transfer time between service locations. Keeping S1094, the 11T drive and the approved mounting interface visible in the inventory record reduces emergency substitution and improves later reorder accuracy.

The production video gives importers and fleet buyers a view of Elecdura starter assembly and electrical checks. For S1094, use it alongside the product-specific reference, application and physical controls on this page, rather than treating a general factory presentation as evidence of fitment.

S1094 Starter Motor Questions from Commercial Buyers

How can branches reduce emergency transfers of S1094 stock in a Daewoo DH370 workshop program?

Keep machine and vehicle demand separated in stock descriptions while using one approved technical record. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What pre-installation circuit review supports replacement with S1094 in a Daewoo DH370 workshop workshop?

Record battery voltage at rest and during the start attempt, then test both main cables under load. Check grounds, terminal tightness and the control feed to the solenoid. Supplying those readings with an enquiry for S1094 helps the workshop avoid replacing a sound starter when the actual fault is elsewhere.

Can S1094 be selected from the application name alone during workshop sourcing?

Confirm S1094 against the complete OE number, the stated Daewoo DH370 excavator and Tata Daewoo Novus use and clear front, side and terminal photographs. The decisive points are 11T, catalog-drawn three-hole mounting face and 47 mm distance to drive gear. Those controls keep visually related starters from being combined in one order.

Which checks should follow an OE-number match for S1094 in a Daewoo DH370 workshop sourcing program?

A number match narrows the search but does not finish it. For S1094, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which dimensions in the S1094 drawing should receiving teams sample during a Daewoo DH370 workshop inspection?

For S1094, sample the catalog-drawn three-hole mounting face, Ø90 locating diameter, Ø148 mounting-hole circle and 47 mm distance to drive gear. Count the 11T pinion and photograph the terminal side in the same inspection. These points can be checked without dismantling the unit and give receiving teams a practical comparison with the approved sample.

What receiving records are useful for a shipment of S1094 during a Daewoo DH370 workshop receiving check?

Receiving should verify the S1094 label, quantity and packaging before opening sampled cartons. Compare the 11T drive, Ø90 locating diameter, mounting holes and terminal side with the approved record. Any damage, missing protection or physical mismatch should be quarantined with photographs and lot details for prompt review.

How should a buyer request samples and bulk pricing for S1094 in a Daewoo DH370 workshop sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For S1094, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

How should a workshop document a service issue involving S1094 in a Daewoo DH370 workshop review?

Submit the purchase reference, lot number, installation date and hours in service, then describe the symptom and operating conditions. Photographs and cranking-circuit measurements should accompany the report. This structured record gives Elecdura enough context to evaluate S1094 without assuming that every no-crank complaint originates inside the starter.

S1094 Ask for Starter Motor Export Pricing

Prepare the S1094 enquiry with the exact application, full removed-unit reference, front and terminal-side photos, quantity, destination and target date. Send it to info@elecdurauto.com so Elecdura can return a technically defined offer covering samples or bulk supply, export packing, warranty and delivery options.