S1095S Daewoo S470LC-V Starter Motor Wholesale Supply

S1095S Starter Motor Wholesale Application Support for Daewoo Solar S470LC-V excavator

For Daewoo Solar S470LC-V excavator, S1095S gives distributors a focused starting point for quotation and branch inventory. Confirm 24V, 8.3kW, 11T and CW, with particular attention to supplier-defined 24V 8.3kW 11T module-4.233 unit for the Solar S470LC-V record, before combining demand from different fleets or workshops.

Separate different old-unit numbers from the S1095S enquiry and attach images for each configuration. State which line is a sample and which is a replenishment quantity, together with destination and timing. This gives the quotation a practical fitment boundary and a realistic packing and delivery plan.

S1095S Starter Motor Mounting Reference for Commercial Buyers

Check the S1095S drawing against the removed starter at the mounting face and drive end. The critical references are 3 × Ø13.5 mounting holes, Ø92 locating diameter, Ø146 mounting-hole circle and 47 mm distance to drive gear. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

The S1095S drive-end decision is completed by 11T, module 4.233 and CW, together with 24V and 8.3kW. Confirm main-terminal and control-terminal positions under the actual cable routing. Similar dimensions do not compensate for the wrong rotation, pinion or electrical rating.

S1095S Starter Motor Cross-Reference Boundary for Importers

The S1095S cross-reference group includes 34007N, S1095S, 19080035, 8200589, DRS0975N, 300516-00020, 300516-00020A. These numbers improve search coverage across fleets and supplier systems, but they do not replace a check of 24V, 8.3kW, 11T, CW, mounting geometry and terminals.

If a mixed S1095S enquiry contains different pinions, drive positions or connector layouts, list each complete reference and photograph separately. Elecdura can then return distinct offers instead of placing unlike starters under one broad reference family.

S1095S Starter Motor Wholesale Ordering and Export Support

Elecdura can prepare S1095S orders for regional inventory, fleet workshops or industrial service demand. The standard starting point is 20 pieces, normally 7–15 days after order confirmation, with an 18-month warranty under agreed terms and packing selected for the destination and shipment method.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified S1095S drive end and electrical rating throughout the order.

For supplier evaluation, the video presents Elecdura starter-motor assembly and testing. A S1095S order should still be released against the complete OE number, Daewoo Solar S470LC-V excavator details, electrical specification and physical comparison, giving purchasing both capability information and a clear product boundary.

S1095S Starter Motor Questions from Commercial Buyers

Which first-lot checks protect a distributor receiving S1095S during a Daewoo S470LC-V service-network receiving check?

For S1095S, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 × Ø13.5 mounting holes, Ø92 locating diameter and the specified 11T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

How should a buyer compare the old unit with the S1095S technical image during a Daewoo S470LC-V service-network inspection?

For S1095S, sample the 3 × Ø13.5 mounting holes, Ø92 locating diameter, Ø146 mounting-hole circle and 47 mm distance to drive gear. Count the 11T pinion and photograph the terminal side in the same inspection. These points can be checked without dismantling the unit and give receiving teams a practical comparison with the approved sample.

How can an importer avoid mixing S1095S with a similar drive-end version during service-network sourcing?

For S1095S, begin with the machine, truck or engine identification, then read the full old-unit label. The physical check should cover 11T, Ø146 mounting-hole circle, Ø92 locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item, even when an application description overlaps.

When does a cross-reference related to S1095S need a separate quotation in a Daewoo S470LC-V service-network sourcing program?

Use the complete alternate number, not a shortened series, and attach photographs of the removed unit. The S1095S group is acceptable only when 24V, 8.3kW, 11T, CW and the physical interface agree. A reference conflict should be clarified before samples or bulk quantities are released.

Why should voltage-drop results accompany an enquiry for S1095S in a Daewoo S470LC-V service-network workshop?

Measure cranking voltage and voltage loss across the positive and negative paths, not only open-circuit battery voltage. Review the solenoid command, cable terminals, engine ground and ring gear. The results provide a useful baseline for S1095S installation and for any later service discussion with the supplier.

How should Daewoo distributors plan stock for S1095S in a Daewoo S470LC-V service-network program?

Define critical-spare coverage from jobsite remoteness and retain the accepted unit record for future urgent supply. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What information should accompany a distributor RFQ for S1095S in a Daewoo S470LC-V service-network sourcing program?

A useful RFQ states S1095S, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

What evidence separates an electrical-system fault from a concern involving S1095S in a Daewoo S470LC-V service-network review?

For a service review of S1095S, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

S1095S Email for Starter Motor B2B Pricing

A complete RFQ for S1095S should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 24V 8.3kW 11T CW starter, MOQ, packaging, warranty and shipping choices.