0-23000-3290 Komatsu Starter Motor 24V 7.5kW 12T

0-23000-3290 Construction Equipment Starter Motor for KOMATSU S6D108

For wholesale program managers planning a repeat order, Elecdura offers 0-23000-3290 as an aftermarket construction equipment starter motor for KOMATSU S6D108. The 24V, 7.5kW and 12T configuration is intended for professional replacement sourcing by construction-equipment parts distributors, importers and fleet suppliers.

For sales teams setting packaging requirements, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

0-23000-3290 Starter Motor Specifications and Technical Drawing

For purchasing teams comparing the flange and terminals, because no dimensional drawing is available for this version, the approved product views, full reference and 24V 7.5kW 12T specification should be compared with the starter being replaced. Customer measurements can then complete the fitment review without introducing unverified dimensions.

For distributors reviewing a replacement proposal, A dimensional drawing was not supplied for 0-23000-3290. For a fitment enquiry, provide straight-on images of the mounting face and drive end plus the locating diameter, hole spacing, pinion projection and terminal direction measured from the starter being replaced.

0-23000-3290 Aftermarket Replacement and Application

For service-parts networks matching the starter removed from the machine, send 0-23000-3290, 0-23000-3291, 6008133550, the full KOMATSU S6D108 description and photos of the starter being removed. These details allow the quotation to stay product-specific when related numbers appear on more than one housing version.

For importers reviewing drive-end geometry, A direct replacement decision should combine the OE group with physical comparison. Check the mounting face, 12T drive and cable-stud direction, and ask for a separate review when one of those features differs.

0-23000-3290 Wholesale Supply for Distributors and Importers

For inventory buyers building a new starter range, importers planning 0-23000-3290 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For fleet-parts buyers requesting production pricing, Elecdura can align product identification, electrical testing and packaging records with the buyer's order. The exact inspection scope depends on the agreed quantity and market requirements and should be stated before production planning.

0-23000-3290 Starter Motor Buyer FAQ

How should a distributor confirm 0-23000-3290 technical claim evidence for repeatable sourcing?

For aftermarket wholesalers preparing distributor pricing, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the KOMATSU S6D108 equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

Which comparison prevents a mismatch for 7.5kW output on KOMATSU S6D108 during an application review?

For fitment reviewers preparing an OE-based quote, the 7.5kW rating belongs to the 0-23000-3290 configuration used for KOMATSU S6D108. Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

What should receiving teams compare on 0-23000-3290 order testing when the existing starter is available?

For wholesale program managers requesting production pricing, Elecdura can discuss armature, solenoid, no-load and load testing for 0-23000-3290. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 7.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

How should a workshop distinguish 0-23000-3290 carton identification before an installation slot is booked?

For sales teams defining label requirements, ask that unit and carton labels repeat the agreed reference, 24V, 7.5kW and 12T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

What must be matched before quoting 0-23000-3290 inquiry package before comparing delivery options?

For warehouse planners confirming commercial terms, A useful inquiry for 0-23000-3290 includes quantity, destination, required date, KOMATSU S6D108, the full old-unit number and clear photos of the label, drive end, front housing and terminal arrangement. State neutral or private-label packaging needs at the same time. Elecdura can then quote the 24V, 7.5kW, 12T version against a unified application-and-specification statement.

Which comparison prevents a mismatch for 0-23000-3290 solenoid and cable routing during fitment review?

For importers reviewing a replacement proposal, use the side and rear photographs of 0-23000-3290 to check solenoid position, battery-stud direction and start-terminal access in KOMATSU S6D108. Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What should receiving teams compare on 0-23000-3290 rear-terminal photograph during fitment review?

For product managers preparing a technical RFQ, use the rear view of 0-23000-3290 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in KOMATSU S6D108. A correct drive end with an unusable terminal position is not a complete fitment match.

What evidence best identifies 0-23000-3290 three-view gallery when several versions look alike?

For maintenance suppliers checking version-defining data, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to 0-23000-3290; they should be reviewed together with the 12T drive and KOMATSU S6D108 application. Request an additional close-up when the customer's unit hides a deciding feature.

Request a Wholesale Quote for 0-23000-3290 Construction Equipment Starter Motor

For private-label buyers defining label requirements, ask for a quote on 0-23000-3290 with the full KOMATSU S6D108 record, quantity and packaging plan. We will verify the requested 24V, 7.5kW and 12T configuration and return the relevant wholesale terms.