023000-8110 Komatsu SA6D170 24V 11kW Starter Motor B2B Supply

023000-8110 Komatsu SA6D170 Starter Motor Wholesale Procurement

Distributors supporting Komatsu SA6D170 can source 023000-8110 in the Nikko-type replacement configuration. The stated 24V, 11kW rating and 11T pinion are kept visible because this product gives Komatsu SA6D170 distributors one traceable 24V line for sample comparison, bulk ordering and branch replenishment; they should remain on the purchase order and receiving record.

Rebuild workshop buyer teams handling first-order sourcing should send 023000-8110, the Komatsu SA6D170 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address consistent rebuild-bench identification, branch-ready labels and the correct physical configuration in one useful commercial offer.

023000-8110 Starter Motor Data for Distributor Review

Start the physical comparison with 11T pinion and 56mm reference, mounting face, drive reach, solenoid position and terminal orientation. Use a straight view of the mounting face and a side view parallel to the shaft so perspective does not hide the flange-to-pinion relationship. A close body shape, paint color or solenoid size is not enough to establish interchangeability.

Before ordering, the buyer should verify 24V, 11kW output, 11T pinion and terminal arrangement. Keeping these points together helps warehouse and sales teams avoid switching a similar-looking unit into the Komatsu SA6D170 order.

023000-8110 Starter Motor OE Reference Control for B2B Orders

For repeat supply, store 023000-8110, Komatsu SA6D170, the received lot and the confirmed old-unit photographs together. That record allows a distributor to reorder the same configuration without rebuilding the decision from a loose list of aftermarket numbers.

For first-order sourcing, keep 023000-8110, Komatsu SA6D170, 24V, 11kW and 11T on one purchasing record. At goods-in, review branch stock-location control before releasing the lot. This gives the rebuild workshop buyer a documented basis for consistent rebuild-bench identification when the next order is raised.

023000-8110 Starter Motor Wholesale Terms and Supply Support

The wholesale offer is built around confirmed product identity, quantity and destination. Standard orders begin at 20 pieces, preparation is normally 7–15 days, and the 18-month warranty follows the agreed sales terms; export packing and label needs are stated before production or allocation.

Demand from a field-service truck should keep 023000-8110 tied to Komatsu SA6D170. For first-order sourcing, the rebuild workshop buyer can use an engine-rebuild allocation, retain the accepted sample photographs and review branch stock-location control at goods-in. This supports consistent rebuild-bench identification while keeping branch-ready labels visible.

This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 023000-8110 order should still be based on the listed application, electrical data and physical unit checks.

023000-8110 Komatsu SA6D170 Starter Motor FAQs

How can a rebuild workshop buyer source 023000-8110 for first-order sourcing?

Rebuild workshop buyer teams should tie 023000-8110 to Komatsu SA6D170, 24V, 11kW, 11T and the removed-unit photographs before requesting price. For first-order sourcing, state quantity, destination and delivery timing, then review branch stock-location control. Ask Elecdura to address branch-ready labels and consistent rebuild-bench identification in the same quotation.

For first-order sourcing handled by a rebuild workshop buyer, which physical details matter most when comparing 023000-8110?

Compare 11T pinion and 56mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Keep 023000-8110 traceable through first-order sourcing.

Rebuild workshop buyer receiving review: What should be checked before installing the 023000-8110 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Link 023000-8110 photographs to the branch stock-location control record.

During first-order sourcing, how can workshops photograph 023000-8110 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Carry the 023000-8110 result into branch-ready labels.

What should receiving staff inspect on the 023000-8110 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Komatsu SA6D170 inventory. Retain 023000-8110 for consistent rebuild-bench identification and receiving review.

Consistent rebuild-bench identification: When is a sample order useful for 023000-8110?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Retain the 023000-8110 result for first-order sourcing.

For branch-ready labels, how should 24V be confirmed for 023000-8110?

Check the machine electrical system, old-starter label and service record before ordering. Keep 11kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. File 023000-8110 with the branch stock-location control check.

During first-order sourcing, can 023000-8110 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Use 023000-8110 when arranging branch-ready labels.

Get 023000-8110 Komatsu SA6D170 Starter Motor Pricing

Email info@elecdurauto.com with 023000-8110, Komatsu SA6D170 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 11kW 11T offer, availability, packing, lead time and freight options.