English
0-23000-7273
0-23000-7273
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0-23000-7273
Mitsubishi S6B/S6R; 24V, 7.5kW, 11T, 47mm pinion reference
Confirm 11T pinion and 47mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 7.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
The 0-23000-7273 starter for Mitsubishi S6B/S6R is intended for replacement demand. It combines 24V, 7.5kW output with the 11T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.
Stocking buyer teams handling first-order sourcing should send 0-23000-7273, the Mitsubishi S6B/S6R record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, urgent dispatch options and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0-23000-7273 |
| Target application | Mitsubishi S6B/S6R |
| Starter design | Mitsubishi Type (Insulated) replacement |
| System voltage | 24V |
| Rated output | 7.5kW |
| Pinion identification | 11T / 47mm reference |
| OE / reference group | 0-23000-7273 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Do not approve 0-23000-7273 from the label alone. Match 11T pinion and 47mm reference, mounting face, drive reach, solenoid position and terminal orientation, followed by the locating surface and drive projection. If one point differs, keep the unit on hold until the engine or machine record explains the difference.
A correct replacement must satisfy both the 24V 7.5kW electrical requirement and the 11T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.
Keep the reference group 0-23000-7273 attached to the Mitsubishi S6B/S6R details and confirmed photographs. This gives branch staff a practical reorder record and prevents a number from being separated from the exact configuration previously received.
For first-order sourcing, keep 0-23000-7273, Mitsubishi S6B/S6R, 24V, 7.5kW and 11T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the stocking buyer a documented basis for clear lot-to-lot comparison when the next order is raised.
For qualified B2B orders, the normal MOQ is 20 pieces and preparation is usually 7–15 days after the order is confirmed. Elecdura can discuss neutral cartons, private-label review, export documents and an 18-month warranty according to the agreed quotation.
Demand from a fleet powertrain store should keep 0-23000-7273 tied to Mitsubishi S6B/S6R. For first-order sourcing, the stocking buyer can use a machine-down contingency stock, hold one incoming unit for comparison and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping urgent dispatch options visible.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 0-23000-7273 order should still be based on the listed application, electrical data and physical unit checks.
Stocking buyer teams should tie 0-23000-7273 to Mitsubishi S6B/S6R, 24V, 7.5kW, 11T and the removed-unit photographs before requesting price. For first-order sourcing, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address urgent dispatch options and clear lot-to-lot comparison in the same quotation.
Compare 11T pinion and 47mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File 0-23000-7273 with the old-unit photo linkage check.
Use the full reference, Mitsubishi S6B/S6R application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Use 0-23000-7273 when arranging urgent dispatch options.
Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. This supports clear lot-to-lot comparison for 0-23000-7273.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Mitsubishi S6B/S6R inventory. Keep 0-23000-7273 traceable through first-order sourcing.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Link 0-23000-7273 photographs to the old-unit photo linkage record.
Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Carry the 0-23000-7273 result into urgent dispatch options.
Send the complete 0-23000-7273 reference, Mitsubishi S6B/S6R details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 7.5kW 11T unit, packing, lead time and freight in one focused offer. Retain 0-23000-7273 for clear lot-to-lot comparison and receiving review.
Email info@elecdurauto.com with 0-23000-7273, Mitsubishi S6B/S6R details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 7.5kW 11T offer, availability, packing, lead time and freight options.
