600-813-3632-24V-9.0KW-12T-3.175M Komatsu Starter Motor

600-813-3632-24V-9.0KW-12T-3.175M Construction Equipment Starter Motor for KOMATSU S6D125 (PC300 / PC400)

For private-label buyers planning a repeat order, 600-813-3632-24V-9.0KW-12T-3.175M is an aftermarket construction equipment starter motor for KOMATSU S6D125 (PC300 / PC400). Its 24V system, 9.0kW output and 12T pinion give construction-equipment parts distributors, importers and fleet suppliers a clear product definition for OE-reference replacement and repeat-order sourcing.

For purchasing teams setting packaging requirements, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

600-813-3632-24V-9.0KW-12T-3.175M Starter Motor Specifications and Technical Drawing

For fitment reviewers reviewing drive-end geometry, the key version difference is the mounting and housing clocking. Compare 65°, 3×120° spacing and 3×Ø17 with the existing starter so the pinion alignment and cable access remain correct.

For application specialists comparing nearby starter versions, the source-faithful technical drawing records the available mounting information for 600-813-3632-24V-9.0KW-12T-3.175M, including 3×Ø17, Ø146, 47±1 mm, 65°, 3×120° spacing; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

600-813-3632-24V-9.0KW-12T-3.175M Aftermarket Replacement and Application

For distributors matching the starter being replaced, 600-813-3632-24V-9.0KW-12T-3.175M, 600-813-3632 forms the usable OE and cross-reference group for this product, while KOMATSU S6D125 (PC300 / PC400) is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For technical buyers checking application evidence, start with the complete reference and application, then compare the 12T drive, flange shape and terminal orientation. A physical difference should be resolved before volume pricing is accepted.

600-813-3632-24V-9.0KW-12T-3.175M Wholesale Supply for Distributors and Importers

For engine-parts specialists building a new starter range, wholesale enquiries for 600-813-3632-24V-9.0KW-12T-3.175M can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For regional parts suppliers requesting production pricing, batch consistency should be controlled through the agreed reference, electrical rating, pinion, packaging and inspection points. Elecdura can discuss test documentation and pre-shipment photos that match the needs of the distributor or importer.

600-813-3632-24V-9.0KW-12T-3.175M Starter Motor Buyer FAQ

What evidence best identifies 600-813-3632-24V-9.0KW-12T-3.175M among Komatsu versions before an installation slot is booked?

For product managers checking application evidence, 600-813-3632-24V-9.0KW-12T-3.175M should remain separate from another Komatsu starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 9.0kW and 12T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

What should purchasing verify first for Ø146 when checking a replacement proposal?

For maintenance suppliers preparing an OE-based quote, 600-813-3632-24V-9.0KW-12T-3.175M shows Ø146. Measure each diameter at the same shoulder or circle indicated in the drawing, rather than taking an unrelated outside-housing dimension. The locating feature centers the starter at the ring gear, so a diameter mismatch can matter even when the bolt holes appear to align.

How can a buyer screen 600-813-3632-24V-9.0KW-12T-3.175M terminal access before stock is assigned?

For equipment-parts dealers separating similar housings, compare the rear housing and terminal direction in the approved product views for 600-813-3632-24V-9.0KW-12T-3.175M. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

How should a distributor confirm 600-813-3632-24V-9.0KW-12T-3.175M drawing dimensions for repeatable sourcing?

For purchasing teams evaluating a direct replacement, read the 600-813-3632-24V-9.0KW-12T-3.175M drawing as a comparison aid, not as permission to ignore the starter being replaced. Check every visible diameter, hole callout, length and angle that affects seating or engagement, then confirm the terminal view from the product photos. The drawing is schematic and not to scale, so decisions must follow the printed values rather than a visual estimate from the image.

What evidence best identifies 24V system compatibility for a documented fitment decision?

For distributors comparing the flange and terminals, 600-813-3632-24V-9.0KW-12T-3.175M is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before ordering. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

Which detail separates 600-813-3632-24V-9.0KW-12T-3.175M inquiry package before comparing delivery options?

For aftermarket product managers opening a first distributor purchase, A useful inquiry for 600-813-3632-24V-9.0KW-12T-3.175M includes quantity, destination, required date, KOMATSU S6D125 (PC300 / PC400), the full old-unit number and clear photos of the label, drive end, locating face and rear connections. State neutral or private-label packaging needs at the same time. Elecdura can then quote the 24V, 9.0kW, 12T version against one unambiguous product description.

What should receiving teams compare on 600-813-3632-24V-9.0KW-12T-3.175M, 600-813-3632 when the starter removed from the machine is available?

For engine-parts specialists preparing a technical RFQ, 600-813-3632-24V-9.0KW-12T-3.175M, 600-813-3632 should be treated as one inquiry group only after the physical starter is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate quotation line instead of assuming that the shared number guarantees interchangeability.

What evidence best identifies 600-813-3632-24V-9.0KW-12T-3.175M carton identification before an installation slot is booked?

For regional parts suppliers preparing a volume quote, ask that unit and carton labels repeat the agreed reference, 24V, 9.0kW and 12T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

Request a Wholesale Quote for 600-813-3632-24V-9.0KW-12T-3.175M Construction Equipment Starter Motor

For aftermarket wholesalers defining label requirements, to source 600-813-3632-24V-9.0KW-12T-3.175M for a distributor or importer program, send the OE group, KOMATSU S6D125 (PC300 / PC400), planned volume and destination. Elecdura will confirm the quoted starter configuration, commercial terms and available inspection support.