600-813-3060 Komatsu Starter Motor 24V 7.5kW 12T

600-813-3060 Construction Equipment Starter Motor for KOMATSU S6D125

For sales teams planning a repeat order, built for KOMATSU S6D125, this construction equipment starter motor combines 24V operation, 7.5kW rated power and a 12T drive. Elecdura supplies 600-813-3060 for excavator, loader and off-highway replacement programs, including distributor stock and planned replenishment.

For warehouse planners setting packaging requirements, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

600-813-3060 Starter Motor Specifications and Technical Drawing

For distributors comparing the flange and terminals, this reference group can cover nearby starter versions. Keep 600-813-3060, 24V, 7.5kW and 12T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For technical buyers comparing nearby starter versions, the source-faithful technical drawing records the available mounting information for 600-813-3060, including 3×Ø17, Ø146, 47±1 mm, 73±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

600-813-3060 Aftermarket Replacement and Application

For importers matching the existing starter, match 600-813-3060 to KOMATSU S6D125 and keep the related numbers 600-813-3060, 0-2300-3152, 600-813-5711 on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For product managers checking application evidence, before a purchase order is released, compare the removed starter's mounting face, 12T drive and terminal direction with the approved gallery. Module 3.175 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

600-813-3060 Wholesale Supply for Distributors and Importers

For fleet-parts buyers building a new starter range, Elecdura supplies 600-813-3060 for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For private-label buyers requesting production pricing, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

600-813-3060 Starter Motor Buyer FAQ

How should a workshop distinguish flange clocking when checking a replacement proposal?

For fitment reviewers checking application evidence, no separate angular callout is stated for 600-813-3060. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

Which detail separates 12-tooth pinion identification for a documented fitment decision?

For application specialists preparing an OE-based quote, count all 12 teeth on the 600-813-3060 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

What should purchasing verify first for 600-813-3060 rear-terminal photograph during fitment review?

For replacement-parts sellers separating similar housings, use the rear view of 600-813-3060 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in KOMATSU S6D125. A correct drive end with an unusable terminal position is not a complete fitment match.

How can an importer validate KOMATSU S6D125 previously replaced starter when preparing a fitment request?

For service-parts networks evaluating a direct replacement, ask whether the starter removed from KOMATSU S6D125 is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with 600-813-3060, 24V, 7.5kW and 12T before turning that history into a bulk stocking decision.

What should receiving teams compare on 600-813-3060 inquiry package before comparing delivery options?

For importers confirming commercial terms, A useful inquiry for 600-813-3060 includes quantity, destination, required date, KOMATSU S6D125, the full old-unit number and clear photos of the label, drive end, flange and electrical connections. State neutral or private-label packaging needs at the same time. Elecdura can then quote the 24V, 7.5kW, 12T version against a single, fully defined specification.

Which check should lead 600-813-3060 cartons and units for warehouse identification?

For inventory buyers opening a first B2B purchase, sample cartons from different positions in the shipment and compare the 600-813-3060 labels, 24V marking, 12-tooth pinion, flange shape and terminal protection with the buying description. Photograph any mixed marking, damaged terminal or different drive end before installation, and isolate those pieces so the rest of the lot can be assessed consistently.

How can a buyer screen 600-813-3060 label and suffix during fitment review?

For maintenance suppliers preparing a technical RFQ, photograph the complete old-unit label for 600-813-3060, including every prefix, suffix and separator. Shortened numbers can group starters that differ in voltage, output, drive or housing. Pair the label with a front and rear view, then retain the full marking in the RFQ and purchase order so later receiving checks use the same identity.

What should purchasing verify first for 12T and module 3.175 for repeatable sourcing?

For equipment-parts dealers checking version-defining data, the supplied drive uses 12 teeth with module 3.175. Count the old pinion teeth and compare outside diameter, rest position and engagement depth ahead of the order. The 3.175 module is part of the gear definition, so another pitch must not be combined on the one stock line. This check protects the ring gear from an incorrect mesh.

Request a Wholesale Quote for 600-813-3060 Construction Equipment Starter Motor

For purchasing teams defining label requirements, prepare the RFQ with 600-813-3060, 0-2300-3152, 600-813-5711, the complete application, quantity, target delivery and packaging requirements. We will respond with the defined 24V 7.5kW 12T starter motor line rather than a generic substitute.