228000-6670 Komatsu Starter Motor 24V 4.5kW 10T

228000-6670 Construction Equipment Starter Motor for KOMATSU S6D102 (PC200-6)

For aftermarket wholesalers planning a repeat order, 228000-6670 is an aftermarket construction equipment starter motor for KOMATSU S6D102 (PC200-6). Its 24V system, 4.5kW output and 10T pinion give construction-equipment parts distributors, importers and fleet suppliers a clear product definition for OE-reference replacement and repeat-order sourcing.

For sourcing managers planning mixed-model inventory, the product is positioned for professional aftermarket supply, with product identification, fitment boundaries, inspection options and commercial terms visible before the buyer requests pricing.

228000-6670 Starter Motor Specifications and Technical Drawing

For maintenance suppliers reviewing drive-end geometry, the product identity combines 228000-6670, KOMATSU S6D102 (PC200-6), 24V, 4.5kW and 10T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For equipment-parts dealers comparing nearby starter versions, the source-faithful technical drawing records the available mounting information for 228000-6670, including 2×Ø11, Ø127, 48±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

228000-6670 Aftermarket Replacement and Application

For application specialists confirming the stated application, KOMATSU S6D102 (PC200-6) is the stated application for 228000-6670. Buyers comparing 228000-6670, 228000-0633 should confirm that the starter being replaced shares the same 24V system, 4.5kW output and 10T drive before adding the item to a distributor order.

For replacement-parts sellers checking application evidence, before a purchase order is released, compare the removed starter's mounting face, 10T drive and terminal direction with the approved gallery. Module 3.175 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

228000-6670 Wholesale Supply for Distributors and Importers

For warehouse planners building a new starter range, importers planning 228000-6670 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For importers requesting production pricing, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

228000-6670 Starter Motor Buyer FAQ

What evidence best identifies 10-tooth pinion identification before comparing delivery options?

For engine-parts specialists checking application evidence, count all 10 teeth on the 228000-6670 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

What should receiving teams compare on 228000-6670 solenoid and cable routing before stock is assigned?

For fleet-parts buyers preparing an OE-based quote, use the side and rear photographs of 228000-6670 to check solenoid position, battery-stud direction and start-terminal access in KOMATSU S6D102 (PC200-6). Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What must be matched before quoting 48±1 mm during fitment review?

For technical sales teams separating similar housings, use 48±1 mm when comparing 228000-6670. Measure from the drawing's indicated faces and keep pinion rest position separate from overall body length. These axial values influence how the drive sits and engages, so the set should agree with the removed starter before a fleet or distributor quantity is released.

What should receiving teams compare on 228000-6670 drawing dimensions when checking a replacement proposal?

For fitment reviewers matching the starter being replaced, read the 228000-6670 drawing as a comparison aid, not as permission to ignore the starter being replaced. Check every visible diameter, hole callout, length and angle that affects seating or engagement, then confirm the terminal view from the product photos. The drawing is schematic and not to scale, so decisions must follow the printed values rather than a visual estimate from the image.

Which specification deserves priority for Ø127 before an installation slot is booked?

For application specialists reviewing drive-end geometry, 228000-6670 shows Ø127. Measure each diameter at the same shoulder or circle indicated in the drawing, rather than taking an unrelated outside-housing dimension. The locating feature centers the starter at the ring gear, so a diameter mismatch can matter even when the bolt holes appear to align.

What should receiving teams compare on 24V and 4.5kW for warehouse identification?

For replacement-parts sellers comparing nearby starter versions, 228000-6670 is defined as 24V and 4.5kW. Confirm the machine electrical system and the old starter rating together, because voltage defines the electrical platform while starter power contributes to usable cranking performance. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

Which check should lead 228000-6670 inside a mixed starter shipment when confirming the commercial line?

For warehouse planners confirming an incoming batch, give each carton line its own reference, 24V, 4.5kW and 10T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

How should a distributor confirm 10T and module 3.175 when checking a replacement proposal?

For importers checking version-defining data, the supplied drive uses 10 teeth with module 3.175. Count the old pinion teeth and compare outside diameter, rest position and engagement depth at inquiry stage. The 3.175 module is part of the gear definition, so another pitch must not be combined on the one item entry. This check protects the ring gear from an incorrect mesh.

Request a Wholesale Quote for 228000-6670 Construction Equipment Starter Motor

For inventory buyers planning replenishment, provide 228000-6670, KOMATSU S6D102 (PC200-6), expected order quantity and destination. Include photos or measurements when the unit taken from service differs in suffix or mounting appearance, and Elecdura will review the correct version before pricing.