600-863-1410 Cummins Starter Motor 12V 2.2kW 9T

600-863-1410 Industrial Diesel Engine Starter Motor for CUMMINS 4BT3.3

For distributors updating a customer item master, built for CUMMINS 4BT3.3, this industrial diesel engine starter motor combines 12V operation, 2.2kW rated power and a 9T drive. Elecdura supplies 600-863-1410 for diesel-engine and generator-set replacement programs, including distributor stock and planned replenishment.

For aftermarket product managers preparing a volume quote, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

600-863-1410 Starter Motor Specifications and Technical Drawing

For replacement-parts sellers separating similar housings, the 9T pinion is a fast visual identifier, but the purchase decision should also retain 12V, 2.2kW, the mounting geometry and terminal position.

For service-parts networks evaluating a direct replacement, the source-faithful technical drawing records the available mounting information for 600-863-1410, including 2×Ø13; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

600-863-1410 Aftermarket Replacement and Application

For engine-parts specialists confirming electrical ratings, the replacement search starts with 600-863-1410, 428000-2650 and the CUMMINS 4BT3.3 application. For mixed fleets or previously repaired machines, add clear old-unit photos so a substituted starter does not become the only fitment evidence.

For fleet-parts buyers checking repeat-order specifications, do not merge a comparable-looking unit into this order only because the main number is related. The 9T drive, module 3, flange and terminals should agree with the version shown here.

600-863-1410 Wholesale Supply for Distributors and Importers

For aftermarket wholesalers planning replenishment, wholesale enquiries for 600-863-1410 can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For sourcing managers reviewing customer demand, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

600-863-1410 Starter Motor Buyer FAQ

What should receiving teams compare on 600-863-1410 stock identification before a purchase order is released?

For private-label buyers setting packaging requirements, label the storage location with 600-863-1410, 12V, 2.2kW and 9T, and keep a verified drive-end and rear-view image with the item master. Do not combine similar-looking Cummins units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

How can a buyer screen locating diameter for a documented fitment decision?

For purchasing teams matching the unit taken from service, no locating diameter is published for 600-863-1410. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

Which check should lead module 3 before comparing delivery options?

For distributors reviewing drive-end geometry, module 3 is part of the gear geometry for 600-863-1410. Confirm it together with the 9-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

How should a distributor confirm CUMMINS 4BT3.3 production changes for warehouse identification?

For technical buyers preparing an OE-based quote, CUMMINS 4BT3.3 may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match 600-863-1410, 12V, 2.2kW and 9T to the original unit in hand. A changed suffix, flange or terminal layout should open a separate review for that machine.

What should receiving teams compare on 2×Ø13 before stock is assigned?

For engine-parts specialists separating similar housings, use the supplied technical drawing to compare 2×Ø13. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

Which detail separates axial reach during an application review?

For fleet-parts buyers evaluating a direct replacement, the source drawing does not provide a complete axial length for 600-863-1410. Ask for measured pinion rest position, flange-to-drive distance and a square side photograph of the old unit. Keep those customer measurements with the 9T drive definition so an unstated length is not borrowed from a neighboring reference.

What evidence best identifies 600-863-1410 three-view gallery before accepting a substitute?

For technical sales teams comparing the flange and terminals, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to 600-863-1410; they should be reviewed together with the 9T drive and CUMMINS 4BT3.3 application. Request an additional close-up when the customer's unit hides a deciding feature.

What should receiving teams compare on 600-863-1410 ring-gear engagement for warehouse identification?

For fitment reviewers comparing nearby starter versions, review the 9T pinion, module 3, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

Request a Wholesale Quote for 600-863-1410 Industrial Diesel Engine Starter Motor

For wholesale program managers building a new starter range, send 600-863-1410, 428000-2650, the CUMMINS 4BT3.3 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 12V, 2.2kW, 9T version and prepare a product-specific wholesale quotation.