0986020141 Heavy-Duty Starter Motor 12V 2kW 10T

0986020141 Heavy-Duty Starter Motor Replacement Supply for B2B Procurement

0986020141 is intended for procurement against equipment identified by starter reference 0986020141 with a 12V, 2kW, 10-tooth clockwise configuration. Keep the approved unit photos, application record and full reference group together so future quotations and repeat orders stay linked to the same physical starter.

The distributor record for 0986020141 should connect the reference group 0986020141 / 112475 / CST15169 / DRS3838 / 4414689 / CS1207 with equipment identified by starter reference 0986020141. Add the old-unit label, mounting-face image, terminal view and receiving result to that record. Reuse it for repeat quotations, but create a new revision whenever the supplier changes the suffix, housing, pinion or electrical rating. A disciplined record reduces avoidable substitutions during urgent replenishment.

0986020141 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for 0986020141.

0986020141 Starter Motor Distributor Specifications for Bulk Procurement

0986020141 Starter Motor OE Cross-Reference Review for B2B Supply

Use 0986020141 as the primary purchasing reference and cross-check 112475, CST15169, DRS3838, 4414689, CS1207. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

0986020141 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Confirm the complete 0986020141 / 112475 / CST15169 / DRS3838 / 4414689 / CS1207 group together with the 12V, 2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

0986020141 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

For a wholesale shipment, sample units across the 0986020141 lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

0986020141 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

0986020141 Starter Motor Distributor FAQ for Distributor Sourcing

How can buyers separate a 0986020141 fault from an equipment fault?

Inspect battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 0986020141 RFQ technically complete?

Send 0986020141 and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 0986020141?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the approved sample with 0986020141, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 0986020141 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling prior to production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 0986020141 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 0986020141?

Use 0986020141 as the control reference and compare the complete group 0986020141 / 112475 / CST15169 / DRS3838 / 4414689 / CS1207. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one RFQ and order line so repeat orders remain traceable.

Where is 0986020141 commonly used, and what still needs confirmation?

Confirm the complete 0986020141 / 112475 / CST15169 / DRS3838 / 4414689 / CS1207 group together with the 12V, 2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 0986020141?

Confirm the complete 0986020141 / 112475 / CST15169 / DRS3838 / 4414689 / CS1207 group together with the 12V, 2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 0986020141 order?

Confirm the complete 0986020141 / 112475 / CST15169 / DRS3838 / 4414689 / CS1207 group together with the 12V, 2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 0986020141 Starter Motors

Send the complete reference, equipment identified by starter reference 0986020141, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.