M3T29482D Heavy-Duty Starter Motor 12V 0.8kW 12T

M3T29482D Heavy-Duty Starter Motor B2B Supply for Aftermarket Buyers

M3T29482D gives aftermarket buyers a defined 12V, 0.8kW, 12-tooth clockwise configuration for equipment identified by starter reference M3T29482D. Link the complete reference group to the buyer's machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

The distributor record for M3T29482D should connect the reference group M3T29482D / UD20495S / S114-122 / DRS2071 with equipment identified by starter reference M3T29482D. Add the old-unit label, mounting-face image, terminal view and receiving result to that record. Reuse it for repeat quotations, but create a new revision whenever the supplier changes the suffix, housing, pinion or electrical rating. A disciplined record reduces avoidable substitutions during urgent replenishment.

M3T29482D Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for M3T29482D.

M3T29482D Starter Motor Distributor Specifications for Aftermarket Buyers

M3T29482D Starter Motor OE Cross-Reference Review for Fleet Replacement

Use M3T29482D as the primary purchasing reference and cross-check UD20495S, S114-122, DRS2071. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

M3T29482D Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete M3T29482D / UD20495S / S114-122 / DRS2071 group together with the 12V, 0.8kW, 12-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

M3T29482D Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the M3T29482D lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

M3T29482D Starter Motor MOQ and Private-Label Supply for Bulk Procurement

M3T29482D Starter Motor Distributor FAQ for B2B Supply

Which incoming-inspection points matter for M3T29482D?

Tie every carton and sampled unit to M3T29482D, the approved reference document and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace M3T29482D?

A substitute is acceptable only when its complete reference relationship, 12V system, 0.8kW rating, 12T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a M3T29482D fault from an equipment fault?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a M3T29482D RFQ technically complete?

Send M3T29482D and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for M3T29482D?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with M3T29482D, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can M3T29482D be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on M3T29482D claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for M3T29482D?

Use M3T29482D as the control reference and measure and compare the complete group M3T29482D / UD20495S / S114-122 / DRS2071. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Retain the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is M3T29482D commonly used, and what still needs confirmation?

Confirm the complete M3T29482D / UD20495S / S114-122 / DRS2071 group together with the 12V, 0.8kW, 12-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for M3T29482D Starter Motors

Send the complete reference, equipment identified by starter reference M3T29482D, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.