S3108 Hyundai County D4DD Starter Motor Wholesale

S3108 Starter Motor B2B Fitment Guide for Hyundai County and HD65 D4DD

Hyundai commercial-vehicle dealers, bus operators and starter-motor wholesalers can use S3108 as the commercial identity for the starter required in Hyundai County and HD65 D4DD. The order should preserve the 9T pinion and the separate 24V 5.0kW 9T module-3 product identified by S3108, avoiding a broad substitution based only on engine family or overall housing appearance.

Send the full S3108 application and old-unit identification rather than only a truck or engine brand. With mounting and terminal photos, quantity, destination and arrival target, Elecdura can discuss the correct starter, MOQ, packing, warranty and shipping route without unnecessary follow-up.

S3108 Starter Motor Drive-End Drawing for Aftermarket Distributors

For S3108 first-lot sampling, place the old and new starters in the same front-facing position. Check three illustrated mounting points, technical-image locating face, illustrated mounting-hole orientation and technical-image drive-end position. Keeping those values with arrival photographs gives purchasing a reusable physical record for later replenishment.

After the S3108 mounting check, verify 24V, 5.0kW, 9T and CW with module 3. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

S3108 Starter Motor OE Number Guide for Aftermarket Supply

1. Search group: S3108, 36100-45500, S0001250238, 600250, 602037 can help distributor teams locate the relevant starter family.
2. Order boundary: Confirm the complete reference with 24V, 5.0kW, 9T, CW, the drawing and terminal photographs before accepting one physical unit.

S3108 Starter Motor Bulk Order Packing and Lead-Time Support

For a bulk order of S3108, Elecdura confirms availability, packing, lead time and freight against the required quantity and destination. Standard terms begin at 20 pieces, normally require 7–15 days after confirmation and include an 18-month warranty under the final sales agreement.

For multi-branch supply, show which quantity is needed immediately and which can follow as planned replenishment. The accepted S3108 sample, dimensional record and terminal photographs can then support carton marking, receiving checks and repeat orders across the customer’s network.

B2B buyers can use the video to review Elecdura’s starter-motor assembly and test process. The approved S3108 configuration remains defined by 24V, 5.0kW, 9T, CW, mounting geometry and terminals, which should be retained in the purchase record.

S3108 Starter Motor Questions from Commercial Buyers

What traceability details should accompany a warranty enquiry for S3108 in a Hyundai County D4DD dealer review?

Keep the carton or product traceability code and note when and where S3108 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.

Why is the S3108 reference match only the start of product selection in a Hyundai County D4DD dealer sourcing program?

Use the complete alternate number, not a shortened series, and attach photographs of the removed unit. The S3108 group is acceptable only when 24V, 5.0kW, 9T, CW and the physical interface agree. A reference conflict should be clarified before samples or bulk quantities are released.

Which details separate S3108 from similar starters used around Hyundai County and HD65 D4DD during dealer sourcing?

For S3108, ask the workshop for the removed starter label and the exact equipment record. Match 24V, 5.0kW, 9T and CW, then compare the locating diameter, mounting holes and terminals. If one of those items changes, request another quotation instead of accepting the similar housing.

What workshop readings are useful when diagnosing a starting complaint involving S3108 in a Hyundai County D4DD dealer workshop?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing S3108. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

Why is a straight mounting-face photo useful for confirming S3108 during a Hyundai County D4DD dealer inspection?

Place the removed starter and S3108 on the same mounting-face orientation. Compare technical-image locating face, illustrated mounting-hole orientation, the three illustrated mounting points and the technical-image drive-end position. The drawing is a dimensional reference rather than a scale template, so use suitable measuring tools and verify the terminals separately.

Can urgent service demand and routine S3108 replenishment share one enquiry in a Hyundai County D4DD dealer program?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent S3108 usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

How can a buyer quarantine a mismatched S3108 unit quickly during a Hyundai County D4DD dealer receiving check?

For S3108, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match three illustrated mounting points, technical-image locating face and the specified 9T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What should be included in a wholesale enquiry for S3108 in a Hyundai County D4DD dealer sourcing program?

Send the complete OE number, exact Hyundai County and HD65 D4DD details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 24V 5.0kW 9T CW starter with packing, lead time, warranty and freight options.

S3108 Request a Starter Motor Fleet Supply Quote

Email info@elecdurauto.com with S3108, the supported Hyundai County and HD65 D4DD record, old-unit photographs, quantity, destination and required arrival date. Elecdura will use those details to confirm the 24V, 5.0kW, 9T CW starter and prepare wholesale pricing with MOQ, lead time, packing and freight.