Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
36100-52000
8200141 / 30051600040A / 3610052000
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
8200141 / 30051600040A / 3610052000
Hyundai County bus applications using the supplier-defined 24V 5.0kW 11T CW starter with a module-3 drive
Confirm 24V, 5.0kW, 11T, CW, module 3, three illustrated mounting points, technical-image locating face, technical-image drive-end position, mounting orientation and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
The buyer value of 36100-52000 is a clear stock definition for Hyundai County bus: 24V, 5.0kW, 11T and CW. The deciding physical detail is the 24V 5.0kW 11T module-3 unit for the Hyundai County reference group, so the application name alone is not enough to release a first order or replace an approved sample.
For the first 36100-52000 order, include the removed-unit label, application details and straight photographs of the drive end and terminals. Quantity, destination, delivery target and any private-label requirement complete the commercial brief and reduce the risk of pricing a related but physically different starter.
| Primary OE reference | 36100-52000 |
| Target application | Hyundai County bus applications |
| Voltage and output | 24V / 5.0kW |
| Pinion and rotation | 11T / module 3 / CW |
| Mounting-hole reference | three illustrated mounting points |
| Drive-end reference | technical-image locating face; technical-image drive-end position; illustrated mounting-hole orientation |
| OE and cross-reference group | 8200141 / 30051600040A / 3610052000 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
A warehouse can confirm the 36100-52000 interface without dismantling the unit. Measure technical-image locating face and illustrated mounting-hole orientation, inspect three illustrated mounting points, then verify the technical-image drive-end position. Photograph the pinion and terminal side so workshop staff can review details that a carton label cannot show.
For 36100-52000, record 11T, CW, 24V and 5.0kW, including module 3. Inspect the pinion, solenoid orientation and terminal access from the same side as the removed unit. A first sample should pass both the label check and this physical comparison.
Distributors can combine an initial 36100-52000 sample plan with a later replenishment forecast. MOQ is 20 pieces, normal lead time is 7–15 days after confirmation and warranty is 18 months under agreed terms; packing and shipping are quoted for the actual route and arrival requirement.
A first-lot sample is useful when the fleet carries related starters with similar housings. Retain the approved 36100-52000 label, front view and terminal view, then use recent demand and branch transfer time to set reserve stock and delivery priorities.
This video introduces Elecdura production and electrical testing for starter motors supplied to distributors and service networks. The commercial offer for 36100-52000 continues to follow the stated application, electrical rating, pinion and mounting details so factory capability and product selection remain clearly connected.
Before fitting 36100-52000, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.
A number match narrows the search but does not finish it. For 36100-52000, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.
Use the complete removed-unit number and exact Hyundai County bus record. Compare the 11T pinion, three illustrated mounting points, technical-image locating face and terminal side with the old starter. A housing resemblance is insufficient when the drive position, mounting face or cable connection differs.
Place the removed starter and 36100-52000 on the same mounting-face orientation. Compare technical-image locating face, illustrated mounting-hole orientation, the three illustrated mounting points and the technical-image drive-end position. The drawing is a dimensional reference rather than a scale template, so use suitable measuring tools and verify the terminals separately.
Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent 36100-52000 usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.
For 36100-52000, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match three illustrated mounting points, technical-image locating face and the specified 11T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.
Send the complete OE number, exact Hyundai County bus details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 24V 5.0kW 11T CW starter with packing, lead time, warranty and freight options.
Keep the carton or product traceability code and note when and where 36100-52000 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.
To discuss 36100-52000 supply, send the complete application and old-unit identification, mounting-face and terminal photos, requested quantity, destination and timing to info@elecdurauto.com. The reply will address the specified starter, sample or bulk availability, export packing, commercial terms and delivery route.
