36100-48100 Hyundai HD78 Starter Motor Wholesale

36100-48100 Starter Motor B2B Fitment Guide for Hyundai HD65, HD78 and HD120 D4GA or D6GA

Hyundai truck distributors, commercial fleets and rotating-electrical wholesalers can use 36100-48100 as the commercial identity for the starter required in Hyundai HD65, HD78 and HD120 D4GA or D6GA. The order should preserve the 11T pinion and the 24V 5.0kW 11T module-3 configuration for Hyundai HD-series truck applications, avoiding a broad substitution based only on engine family or overall housing appearance.

Send the full 36100-48100 application and old-unit identification rather than only a truck or engine brand. With mounting and terminal photos, quantity, destination and arrival target, Elecdura can discuss the correct starter, MOQ, packing, warranty and shipping route without unnecessary follow-up.

36100-48100 Starter Motor Drive-End Drawing for Aftermarket Distributors

For 36100-48100 first-lot sampling, place the old and new starters in the same front-facing position. Check three illustrated mounting points, technical-image locating face, illustrated mounting-hole orientation and technical-image drive-end position. Keeping those values with arrival photographs gives purchasing a reusable physical record for later replenishment.

After the 36100-48100 mounting check, verify 24V, 5.0kW, 11T and CW with module 3. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

36100-48100 Starter Motor OE Number Guide for Aftermarket Supply

1. Search group: 3610048100, STA8100KR, STA8100WD, 1198717, 682321, 300N10499Z can help distributor teams locate the relevant starter family.
2. Order boundary: Confirm the complete reference with 24V, 5.0kW, 11T, CW, the drawing and terminal photographs before accepting one physical unit.

36100-48100 Starter Motor Bulk Order Packing and Lead-Time Support

For a bulk order of 36100-48100, Elecdura confirms availability, packing, lead time and freight against the required quantity and destination. Standard terms begin at 20 pieces, normally require 7–15 days after confirmation and include an 18-month warranty under the final sales agreement.

For multi-branch supply, show which quantity is needed immediately and which can follow as planned replenishment. The accepted 36100-48100 sample, dimensional record and terminal photographs can then support carton marking, receiving checks and repeat orders across the customer’s network.

B2B buyers can use the video to review Elecdura’s starter-motor assembly and test process. The approved 36100-48100 configuration remains defined by 24V, 5.0kW, 11T, CW, mounting geometry and terminals, which should be retained in the purchase record.

36100-48100 Starter Motor Questions from Commercial Buyers

Which checks should follow an OE-number match for 36100-48100 in a Hyundai HD78 dealer sourcing program?

A number match narrows the search but does not finish it. For 36100-48100, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which cranking-circuit tests should precede replacement of 36100-48100 in a Hyundai HD78 dealer workshop?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing 36100-48100. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

How should a fleet workshop verify 36100-48100 against the removed starter during dealer sourcing?

For 36100-48100, begin with the machine, truck or engine identification, then read the full old-unit label. The physical check should cover 11T, illustrated mounting-hole orientation, technical-image locating face and terminal orientation. Treat a different drive end or connector position as a separate item, even when an application description overlaps.

Which 36100-48100 dimensions are practical for a warehouse inspection during a Hyundai HD78 dealer inspection?

The first-lot check should cover three illustrated mounting points, technical-image locating face and technical-image drive-end position. Add the 11T pinion, rotation and terminal position to the inspection sheet. Recording those details helps a warehouse identify a mixed or incorrectly labelled unit before it reaches a workshop or customer.

What demand information helps set a sensible reorder level for 36100-48100 in a Hyundai HD78 dealer program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For 36100-48100, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

Which physical points should be checked before 36100-48100 enters branch stock during a Hyundai HD78 dealer receiving check?

For 36100-48100, match carton and product labels to the purchase order, then sample 24V, 11T, three illustrated mounting points and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

Which order conditions should be stated when asking about 36100-48100 in a Hyundai HD78 dealer sourcing program?

A useful RFQ states 36100-48100, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

Which test results help investigate a returned 36100-48100 starter in a Hyundai HD78 dealer review?

For a service review of 36100-48100, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

36100-48100 Request a Starter Motor Fleet Supply Quote

Email info@elecdurauto.com with 36100-48100, the supported Hyundai HD65, HD78 and HD120 D4GA or D6GA record, old-unit photographs, quantity, destination and required arrival date. Elecdura will use those details to confirm the 24V, 5.0kW, 11T CW starter and prepare wholesale pricing with MOQ, lead time, packing and freight.