ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
36100-84800
36100-84800
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
36100-84800
Hyundai D6C; 24V, 6.0kW, 13T, 55mm pinion reference
Confirm 13T pinion and 55mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 6.0kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
For workshops and distributors serving Hyundai D6C, 36100-84800 provides a defined 24V, 6.0kW, 13T purchasing reference. Its role is practical: supports Hyundai D6C stock planning where mixed voltage or output variants would create avoidable fitment returns, while quotation details remain tied to the actual engine or machine being serviced.
Stocking buyer teams handling engine-overhaul planning should send 36100-84800, the Hyundai D6C record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, urgent dispatch options and the correct physical configuration in one useful commercial offer.
| Primary order identity | 36100-84800 |
| Target application | Hyundai D6C |
| Starter design | Mitsubishi-type replacement |
| System voltage | 24V |
| Rated output | 6.0kW |
| Pinion identification | 13T / 55mm reference |
| OE / reference group | 36100-84800 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Receiving and technical teams should concentrate on 13T pinion and 55mm reference, mounting face, drive reach, solenoid position and terminal orientation. A square drive-end image plus a side image gives a much clearer comparison of mounting, locating and pinion relationships than a general product shot, reducing the chance of releasing a visually similar but unsuitable unit.
Before ordering, the buyer should verify 24V, 6.0kW output, 13T pinion and terminal arrangement. Keeping these points together helps warehouse and sales teams avoid switching a similar-looking unit into the Hyundai D6C order.
The reference line for this product is 36100-84800. Do not shorten punctuation or merge it with a neighboring family in the ERP; retain Hyundai D6C and the core specification beside it so sales, purchasing and receiving teams are working from the same item identity.
For engine-overhaul planning, keep 36100-84800, Hyundai D6C, 24V, 6.0kW and 13T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the stocking buyer a documented basis for shorter machine downtime when the next order is raised.
The wholesale offer is built around confirmed product identity, quantity and destination. Standard orders begin at 20 pieces, preparation is normally 7–15 days, and the 18-month warranty follows the agreed sales terms; export packing and label needs are stated before production or allocation.
Demand from a diesel rebuild bench should keep 36100-84800 tied to Hyundai D6C. For engine-overhaul planning, the stocking buyer can use a fast-moving counter stock, hold one incoming unit for comparison and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping urgent dispatch options visible.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 36100-84800 order should still be based on the listed application, electrical data and physical unit checks.
Stocking buyer teams should tie 36100-84800 to Hyundai D6C, 24V, 6.0kW, 13T and the removed-unit photographs before requesting price. For engine-overhaul planning, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address urgent dispatch options and shorter machine downtime in the same quotation.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 55mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. File 36100-84800 with the flange and locating-register fit check.
Use the full reference, Hyundai D6C application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Use 36100-84800 when arranging urgent dispatch options.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Retain 36100-84800 for shorter machine downtime and receiving review.
Use active Hyundai D6C customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. File 36100-84800 with the flange and locating-register fit check.
Check the machine electrical system, old-starter label and service record before ordering. Keep 6.0kW, 13T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. File 36100-84800 with the flange and locating-register fit check.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Hyundai D6C inventory. This supports shorter machine downtime for 36100-84800.
Compare 13T pinion and 55mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Keep 36100-84800 traceable through engine-overhaul planning.
Email info@elecdurauto.com with 36100-84800, Hyundai D6C details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 13T offer, availability, packing, lead time and freight options.
