123708103 Ursus Zetor Starter Motor Wholesale

123708103 Starter Motor B2B Fitment Guide for Ursus and Zetor agricultural-equipment

Ursus and Zetor distributors, tractor workshops and agricultural-parts importers can source 123708103 for Ursus and Zetor agricultural-equipment. Preserve the 11T pinion and 12V 2.8kW 11T module-3.175 catalog configuration; do not substitute by engine family or housing appearance alone.

Build the 123708103 RFQ around the complete removed-unit number, exact machine or engine information, mounting-face and terminal-side photographs, quantity and delivery point. These details let Elecdura quote the specified starter, export packing and timing without turning the offer into a general application guess.

123708103 Starter Motor Specifications and Drawing for Wholesale Buyers

123708103 Ursus and Zetor agricultural-equipment 12V 2.8kW 11T starter mounting dimensions.

For 123708103 first-lot sampling, place the old and new starters in the same front-facing position. Check mounting-hole layout from the drawing, locating-pilot profile from the drawing, mounting-face pattern from the drawing and drive-end projection from the drawing. Keeping those values with arrival photographs gives purchasing a reusable physical record for later replenishment.

After the 123708103 mounting check, verify 12V, 2.8kW, 11T and CW with module 3. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

123708103 Starter Motor OE Number Guide for Aftermarket Supply

1. Search group: 123708103, 19798, 9142722, 443115144722 can help distributor teams locate the relevant starter family.

2. Order boundary: Confirm the complete reference with 12V, 2.8kW, 11T, CW, the drawing and terminal photographs before accepting one physical unit.

123708103 Starter Motor Bulk Order Packing and Lead-Time Support

For a bulk order of 123708103, Elecdura confirms availability, packing, lead time and freight against the required quantity and destination. Standard terms begin at 20 pieces, normally require 7–15 days after confirmation and include an 18-month warranty under the final sales agreement.

For multi-branch supply, show which quantity is needed immediately and which can follow as planned replenishment. The accepted 123708103 sample, dimensional record and terminal photographs can then support carton marking, receiving checks and repeat orders across the customer’s network.

This video introduces Elecdura production and electrical testing for starter motors supplied to distributors and service networks. The commercial offer for 123708103 continues to follow the stated application, electrical rating, pinion and mounting details so factory capability and product selection remain clearly connected.

123708103 Starter Motor Questions from Commercial Buyers

Why is a straight mounting-face photo useful for confirming 123708103 during an Ursus Zetor dealer inspection?

Align the removed starter and 123708103 at the mounting face. Compare locating-pilot profile from the drawing, mounting-face pattern from the drawing, mounting-hole layout from the drawing and drive-end projection from the drawing. Use the drawing for dimensions, measure with suitable tools and check terminals separately.

Can 123708103 be selected from the application name alone during dealer sourcing?

Confirm 123708103 with the complete OE number, Ursus and Zetor agricultural-equipment record and clear front, side and terminal photographs. Check 11T, mounting-hole layout from the drawing and drive-end projection from the drawing so visually related starters stay on separate order lines.

Which checks should follow an OE-number match for 123708103 in an Ursus Zetor dealer sourcing program?

A number match narrows the search but does not finish it. For 123708103, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which cranking-circuit tests should precede replacement of 123708103 during an Ursus Zetor dealer electrical check?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing 123708103. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

Which operating factors should guide a fleet's 123708103 reserve quantity in an Ursus Zetor dealer program?

Review workshop consumption by the stated Ursus and Zetor agricultural-equipment population instead of pooling every visually similar starter. Record monthly issues, lead-time exposure and the reserve required at each branch. That information supports a practical 123708103 reorder point and avoids holding the wrong drive-end version as emergency stock.

What carton-to-product checks are appropriate for 123708103 during an Ursus Zetor dealer receiving check?

Use a first-lot sample to confirm 123708103, 12V, 2.8kW, 11T and CW. Inspect the mounting face, terminals and protective packing, then retain the lot reference and images. This gives warehouse and sales teams a shared record before units are distributed to branches or workshops.

Which details allow Elecdura to quote 123708103 without delay in an Ursus Zetor dealer sourcing program?

List 123708103 together with the supported equipment record, 12V, 2.8kW, 11T and CW. Send old-unit photos, order volume, destination and requested timing, plus any private-label or staged-delivery requirement. This keeps the technical selection and the commercial offer aligned from the first response.

How can a distributor prepare a complete claim file for 123708103 in an Ursus Zetor dealer review?

For 123708103, provide the delivery lot, installation date, operating hours and a clear fault description. Include photographs of the label, pinion, mounting face and terminals, together with battery and voltage-drop results under cranking load. These records help separate product condition from application, installation, electrical-system or transport-related causes.

123708103 Start a Starter Motor Wholesale Enquiry

To discuss 123708103 supply, send the complete application and old-unit identification, mounting-face and terminal photos, requested quantity, destination and timing to info@elecdurauto.com. The reply will address the specified starter, sample or bulk availability, export packing, commercial terms and delivery route.