243708101
243708101 / 18547
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
243708101 / 18547
Belarus 520 and 522 tractor applications, specified as a 24V 4.5kW 10T CW starter with a module-3.175 drive
Confirm 24V, 4.5kW, 10T, CW, module 3.175, illustrated complete starter mounting-hole layout, illustrated locating-pilot shoulder profile, illustrated pinion-side drive-end projection, mounting orientation and terminal layout against the removed starter before volume supply.
| Availability: | |
|---|---|
| Quantity: | |
For Belarus 520 and 522 tractor, 243708101 gives distributors a focused starting point for quotation and branch inventory. Confirm 24V, 4.5kW, 10T and CW, with particular attention to 24V 4.5kW 10T module-3.175 Belarus 520/522 specified configuration, before combining demand from different fleets or workshops.
Before comparing 243708101 prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.
| Primary OE reference | 243708101 |
| Target application | Belarus 520 and 522 tractor applications |
| Voltage and output | 24V / 4.5kW |
| Pinion and rotation | 10T / module 3.175 / CW |
| Mounting-hole reference | illustrated complete starter mounting-hole layout |
| Drive-end reference | illustrated locating-pilot shoulder profile; illustrated pinion-side drive-end projection; illustrated complete mounting-face pattern |
| OE and cross-reference group | 243708101 / 18547 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Use the 243708101 technical drawing to check illustrated locating-pilot shoulder profile, illustrated pinion-side drive-end projection and illustrated complete mounting-face pattern. Add the illustrated complete starter mounting-hole layout to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.
After the 243708101 mounting check, verify 24V, 4.5kW, 10T and CW with module 3.175. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.
The 243708101 cross-reference group includes 243708101, 18547. Use these numbers to search supplier systems, then confirm 24V, 4.5kW, 10T, CW, mounting geometry and terminals.
For 243708101, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.
Elecdura supports distributor orders from 20 pieces, normally with a 7–15 day lead time after order confirmation and an 18-month warranty under agreed sales terms. Availability, export packing and delivery timing are confirmed against the requested 243708101 quantity, destination and required arrival date.
Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified 243708101 drive end and electrical rating throughout the order.
This video introduces Elecdura production and electrical testing for starter motors supplied to distributors and service networks. The commercial offer for 243708101 continues to follow the stated application, electrical rating, pinion and mounting details so factory capability and product selection remain clearly connected.
A number match narrows the search but does not finish it. For 243708101, compare the stated application, electrical output, 10T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.
For 243708101, check illustrated complete starter mounting-hole layout, illustrated locating-pilot shoulder profile, illustrated complete mounting-face pattern and illustrated pinion-side drive-end projection. Count the 10T pinion and photograph the terminal side. Record these checks against the approved sample without dismantling the unit.
For 243708101 in Belarus 520 and 522 tractor, confirm the machine or engine identity and read the full old-unit label. Check 10T, illustrated complete mounting-face pattern, illustrated locating-pilot shoulder profile and terminal orientation. Treat a different drive end or connector position as a separate item when the stated application overlaps.
Before fitting 243708101, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.
Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For 243708101, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.
For 243708101, match carton and product labels to the purchase order, then sample 24V, 10T, illustrated complete starter mounting-hole layout and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.
A useful RFQ states 243708101, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.
For a service review of 243708101, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.
Email info@elecdurauto.com with 243708101, the supported Belarus 520 and 522 tractor record, old-unit photographs, quantity, destination and required arrival date. Elecdura will use those details to confirm the 24V, 4.5kW, 10T CW starter and prepare wholesale pricing with MOQ, lead time, packing and freight.