S0114 SAME Centauro 70 Starter Motor Wholesale

S0114 Starter Motor Wholesale Application Support for SAME Centauro 70 and Lamborghini 1000.4W tractor

For SAME Centauro 70 and Lamborghini 1000.4W tractor, S0114 gives distributors a focused starting point for quotation and branch inventory. Confirm 12V, 3.0kW, 11T and CW, with particular attention to 12V 3.0kW 11T module-3 two-hole configuration with an Ø105 mm mounting-hole circle, before combining demand from different fleets or workshops.

Separate different old-unit numbers from the S0114 enquiry and attach images for each configuration. State which line is a sample and which is a replenishment quantity, together with destination and timing. This gives the quotation a practical fitment boundary and a realistic packing and delivery plan.

S0114 Starter Motor Mounting Reference for Commercial Buyers

Check the S0114 drawing against the removed starter at the mounting face and drive end. The critical references are 2 mounting holes shown as 13.5, 13.5 mm, Ø83 mm locating diameter, Ø105 mm mounting-hole circle and 21.5 mm drive-end distance. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

The S0114 drive-end decision is completed by 11T, module 3 and CW, together with 12V and 3.0kW. Confirm main-terminal and control-terminal positions under the actual cable routing. Similar dimensions do not compensate for the wrong rotation, pinion or electrical rating.

S0114 Starter Motor Cross-Reference Boundary for Importers

The S0114 cross-reference group includes S0114, 110530, 0001354014, 0001354090, 0001358003, 0001358006, 0001358014. Use these numbers to search supplier systems, then confirm 12V, 3.0kW, 11T, CW, mounting geometry and terminals.

For S0114, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

S0114 Starter Motor Wholesale Ordering and Export Support

Elecdura can prepare S0114 orders for regional inventory, fleet workshops or industrial service demand. The standard starting point is 20 pieces, normally 7–15 days after order confirmation, with an 18-month warranty under agreed terms and packing selected for the destination and shipment method.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified S0114 drive end and electrical rating throughout the order.

For supplier evaluation, the video presents Elecdura starter-motor assembly and testing. A S0114 order should still be released against the complete OE number, SAME Centauro 70 and Lamborghini 1000.4W tractor details, electrical specification and physical comparison, giving purchasing both capability information and a clear product boundary.

S0114 Starter Motor Questions from Commercial Buyers

Which first-lot checks protect a distributor receiving S0114 during a SAME Centauro 70 service-network receiving check for the two-hole SAME tractor configuration?

For S0114, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 2 mounting holes shown as 13.5, 13.5 mm, Ø83 mm locating diameter and the specified 11T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

How should a buyer compare the old unit with the S0114 technical image during a SAME Centauro 70 service-network inspection for the two-hole SAME tractor configuration?

For S0114, check 2 mounting holes shown as 13.5, 13.5 mm, Ø83 mm locating diameter, Ø105 mm mounting-hole circle and 21.5 mm drive-end distance. Count the 11T pinion and photograph the terminal side. Record these checks against the approved sample without dismantling the unit.

How can an importer avoid mixing S0114 with a similar drive-end version during service-network sourcing for the two-hole SAME tractor configuration?

For S0114, begin with the machine, truck or engine identification, then read the full old-unit label. The physical check should cover 11T, Ø105 mm mounting-hole circle, Ø83 mm locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item, even when an application description overlaps.

When does a cross-reference related to S0114 need a separate quotation in a SAME Centauro 70 service-network sourcing program for the two-hole SAME tractor configuration?

Use the complete alternate number, not a shortened series, and attach photographs of the removed unit. The S0114 group is acceptable only when 12V, 3.0kW, 11T, CW and the physical interface agree. A reference conflict should be clarified before samples or bulk quantities are released.

Why should voltage-drop results accompany an enquiry for S0114 in a SAME Centauro 70 service-network workshop for the two-hole SAME tractor configuration?

Measure cranking voltage and voltage loss across the positive and negative paths, not only open-circuit battery voltage. Review the solenoid command, cable terminals, engine ground and ring gear. The results provide a useful baseline for S0114 installation and for any later service discussion with the supplier.

How should SAME distributors plan stock for S0114 in a SAME Centauro 70 service-network program for the two-hole SAME tractor configuration?

Retain tractor model, 11T drive and two-hole geometry for seasonal dealer replenishment. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What information should accompany a distributor RFQ for S0114 in a SAME Centauro 70 service-network sourcing program for the two-hole SAME tractor configuration?

A useful RFQ states S0114, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

What evidence separates an electrical-system fault from a concern involving S0114 in a SAME Centauro 70 service-network review for the two-hole SAME tractor configuration?

For a service review of S0114, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

S0114 Email for Starter Motor B2B Pricing

A complete RFQ for S0114 should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 12V 3.0kW 11T CW starter, MOQ, packaging, warranty and shipping choices.