S0702S Case W15 3.0kW Starter Motor Wholesale

S0702S Starter Motor Wholesale Application Support for Case 4T-390 engine and W15 loader

For Case 4T-390 engine and W15 loader, S0702S gives distributors a focused starting point for quotation and branch inventory. Confirm 24V, 3.0kW, 9T and CW, with particular attention to 24V 3.0kW 9T module-3 catalog configuration, before combining demand from different fleets or workshops.

Send the full S0702S application and old-unit identification rather than only a truck or engine brand. With mounting and terminal photos, quantity, destination and arrival target, Elecdura can discuss the correct starter, MOQ, packing, warranty and shipping route without unnecessary follow-up.

S0702S Starter Motor Drive-End Drawing for Aftermarket Distributors

The S0702S dimensional review starts at the mounting face: verify 3 mounting holes shown as 11, 11, 11 mm, Ø127 mm mounting-hole circle and Ø89 mm locating diameter. Then compare the 48 mm drive-end distance. The drawing is not a scale template, so record actual measurements and review terminal orientation separately.

For S0702S, record 9T, CW, 24V and 3.0kW, including module 3. Inspect the pinion, solenoid orientation and terminal access from the same side as the removed unit. A first sample should pass both the label check and this physical comparison.

S0702S Starter Motor OE Number Guide for Aftermarket Supply

The S0702S cross-reference group includes S0702S, 113184, 0001368069, A186142, P941519Q, Q941519, 19084023. Use these numbers to search supplier systems, then confirm 24V, 3.0kW, 9T, CW, mounting geometry and terminals.

For S0702S, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

S0702S Starter Motor Wholesale Ordering and Export Support

MOQ begins at 20 pieces, with normal lead time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. For S0702S, the offer can distinguish samples, available stock and production quantities while confirming carton protection and the shipment plan for the destination.

Put the 3.0kW rating and W15 application on quotation and stock labels. Buyers should also state whether the order supports a single workshop, several branches or a fleet contract, allowing samples, safety stock, carton labels and staged dispatch to be planned around the actual service requirement.

The video introduces Elecdura starter-motor assembly and electrical testing for B2B supply programs. Selection of S0702S remains tied to the stated Case 4T-390 engine and W15 loader application, 9T drive, mounting interface and terminals, while the video helps distributor teams review production and testing capability.

S0702S Starter Motor Questions from Commercial Buyers

What traceability details should accompany a warranty enquiry for S0702S in a Case W15 3.0kW service-network review?

Keep the carton or product traceability code and note when and where S0702S 3.0kW was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete records allow technical support to respond without repeated requests for basic information.

Which electrical conditions can imitate a failed S0702S starter motor during a Case W15 3.0kW service-network electrical check?

Before fitting S0702S 3.0kW, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

Which details separate S0702S from similar starters used around Case 4T-390 engine and W15 loader during service-network sourcing?

For S0702S 3.0kW, ask the workshop for the removed starter label and the exact equipment record. Match 24V, 3.0kW, 9T and CW, then compare the locating diameter, mounting holes and terminals. If one of those items changes, request another quotation instead of accepting the similar housing.

Can a purchasing team consolidate every S0702S reference into one stock line in a Case W15 3.0kW service-network sourcing program?

The references identify a related sourcing family, not automatic interchangeability. Use S0702S 3.0kW, 113184, 0001368069, A186142, P941519Q to locate possible matches, then confirm 24V, 3.0kW, 9T, CW and the mounting face. Any difference in drive position, terminal layout or locating diameter requires a separate product decision.

Why is a straight mounting-face photo useful for confirming S0702S during a Case W15 3.0kW service-network inspection?

Align the removed starter and S0702S 3.0kW at the mounting face. Compare Ø89 mm locating diameter, Ø127 mm mounting-hole circle, 3 mounting holes shown as 11, 11, 11 mm and 48 mm drive-end distance. Use the drawing for dimensions, measure with suitable tools and check terminals separately.

Can urgent service demand and routine S0702S replenishment share one enquiry in a Case W15 3.0kW service-network program?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent S0702S 3.0kW usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

How can a buyer quarantine a mismatched S0702S unit quickly during a Case W15 3.0kW service-network receiving check?

For S0702S 3.0kW, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and the specified 9T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What should be included in a wholesale enquiry for S0702S in a Case W15 3.0kW service-network sourcing program?

Send the complete OE number, exact Case 4T-390 engine and W15 loader details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 24V 3.0kW 9T CW starter with packing, lead time, warranty and freight options.

S0702S Request Starter Motor Wholesale Pricing

Send the complete S0702S reference, Case 4T-390 engine and W15 loader details, removed-unit label and photographs, quantity, destination and required arrival date. Email info@elecdurauto.com to discuss the specified 24V, 3.0kW, 9T CW starter, MOQ, packing, lead time, warranty and freight.