ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
128000-9500
128000-9500
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
128000-9500
Case 580E; 12V, 2.5kW, 13T, 40 mm pinion reference
Confirm front flange, 13T pinion, 40 mm reference and cable-stud direction, 12V, 2.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
128000-9500 for Case 580E is presented for wholesale enquiries with the listed 12V, 2.5kW and 13T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.
The initial enquiry should show who will use the starter, which Case 580E unit it serves and how many pieces are required. Pair that information with 128000-9500, old-unit photographs and the requested delivery date so sample and bulk options can be discussed on the same factual basis.
| Primary order identity | 128000-9500 |
| Target application | Case 580E |
| Starter design | DENSO-type gear-reduction replacement |
| System voltage | 12V |
| Rated output | 2.5kW |
| Pinion identification | 13T / 40 mm reference |
| OE / reference group | 128000-9500 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The fastest useful fit check is a paired view of front flange, 13T pinion, 40 mm reference and cable-stud direction and the side profile. Keep the old starter and proposed sample in the same orientation, then compare the locating shoulder and pinion position. This creates a reusable reference for later branch orders.
The purchase record should state 12V, 2.5kW and 13T. Also compare solenoid position, battery-stud access and the control terminal with the removed unit. Cable reach or nearby components can make a different terminal orientation unsuitable even when the flange appears correct.
A mixed-reference enquiry should show 128000-9500 and every alternative on separate lines, each tied to its own photo or source. Elecdura can then compare the candidates with the Case 580E requirement without implying that all listed numbers are automatically interchangeable.
For this backhoe requirement, purchasing teams should preserve an application-specific confirmation record for branches selling multiple 580 variants. Keep the confirmed Case 580E details, product photographs and received lot beside the item record so a later order can be compared with the same physical and commercial reference.
Wholesale buyers may combine an initial verification order with a forward replenishment plan, provided each reference remains clearly separated. Normal terms are MOQ 20 pieces, 7–15 days after confirmation and an 18-month warranty; packing and freight are quoted for the stated destination.
Use the buyer's real service pattern when sizing this line. Because it targets Case 580E service stock and is intentionally separated from a later 24V Cummins use of the same reference, a central warehouse and a remote service point may need different reorder levels; note both in the enquiry if split delivery would reduce internal transfers.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 128000-9500 application and specification shown above for their own product comparison.
Check the machine electrical system, old-starter label and service record before ordering. Keep 2.5kW, 13T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain the 2.5kW 13T specification with the 128000-9500 2.5kW decision.
Use active Case 580E customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Keep the result under the complete 128000-9500 2.5kW item record.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. The 128000-9500 2.5kW result should remain traceable to the 12V 2.5kW 13T configuration.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Case 580E inventory. Keep the result under the complete 128000-9500 2.5kW item record.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40 mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. The 128000-9500 2.5kW result should remain traceable to the 12V 2.5kW 13T configuration.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep the result under the complete 128000-9500 2.5kW item record.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Case 580E, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Keep the result under the complete 128000-9500 2.5kW item record.
Provide the invoice or lot reference, installation date, Case 580E details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Keep the confirmed photographs with 128000-9500 2.5kW for future receiving checks.
Email info@elecdurauto.com with 128000-9500, Case 580E details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.5kW 13T offer, availability, packing, lead time and freight options.
